Compared to normal arc-related volcanic eruptions, the formation of a volcanic caldera is a relatively atypical event. During caldera formation a series of large volumes of magma are erupted, ...reducing the structural support for the rock above the magma chamber and creating a large depression at the surface called caldera. Los Humeros volcanic field (LHVF) represents one of the largest volcanic calderas in Mexico. It is located some 400 km from the trench at the eastern edge of the Trans Mexican Volcanic Belt where the depth to the Cocos slab is more than 300 km. In this study we employ high-resolution two-dimensional thermomechanical numerical simulations of magma intrusions and a horizontal tectonic strain rate to better understand the influence of crustal deformation for the formation of Los Humeros caldera. A minimum number of three thermal anomaly pulses of hydrated mantle material (with diameter of 15 km or more) and a regional strain rate of 7.927 × 10
s
are required for magma to reach the surface. Modeling results show that regional extension coupled with deep thermal anomalies (with a temperature excess of ΔT ≥ 100 °C) that come in a specific chain-type sequence produce surface deformation patterns similar to LHVF. We propose an asthenospheric sub-slab deep source (> 300 km depth) for the thermal anomalies where previous studies showed the existence of a gap or tear in the Cocos slab.
The subduction of the Philippine Sea (PHS) plate along the Nankai Trough in in southwest Japan is a relatively recent process compared with subduction along the Japan Trench in northeast Japan. ...However, the tectonic evolution of the PHS plate along the Nankai Trough is still controversial and not fully understood. There are several competing hypotheses based on different estimates for the time variations of convergence rate and plate age. Our study employs numerical modelling of subduction in order to evaluate the slab evolution for the last 15 Myr and aims to evaluate each tectonic scenario against the present-day slab geometry along a profile passing through the Shikoku and Chugoku regions. The modelling strategy involves a parameter study where subduction initiation and various subduction parameters are analyzed in terms of subduction geometry evolution. Two-dimensional visco-elasto-plastic numerical simulations of spontaneous bending subduction predict that convergence rate and plate age variations play an important role in the evolution of subduction geometry. Modeling results after 15 Myr of evolution reveal that the tectonic model based on a high convergence rate between ~ 15 Ma and ~ 3 Ma produces a slab geometry that agrees well with the observed present-day slab shape specific for the Shikoku and Chugoku regions.
The Middle America subduction zone (MASZ) is one of the world’ most complex convergent margins as it involves the subduction of the Rivera and Cocos young oceanic plates beneath the North American ...and Caribbean plates and is bounded by the Gulf of California rift and the Panama slab window. Characterized by contorted and unusual slab geometry, irregularly distributed seismicity and volcanism, exceptionally large slow slip events (SSE) and non-volcanic tremors (NVT), this subduction system represents a great natural laboratory for better understanding geodynamic processes at a fundamental level. Based on a solid observational foundation, and incorporating the latest experimental results into a coherent geodynamical framework, we shed light on the main processes controlling the subduction system evolution in this region. The tectonics, volcanism, slab geometry and segmentation along the margin are reviewed from a geodynamical perspective. We proposed and discussed a series of evolutionary scenarios for the Mexican and Central American subduction zones, providing a coherent starting base for future geodynamical modeling studies tailored to this active margin. We discuss comparatively the recently discovered SSEs and NVTs along the MASZ, and try to differentiate among the proposed mechanisms responsible for these observations. Finally we discuss the recent seismic anisotropy observations in a geodynamic context, offering an integrated view of mantle flow pattern along the entire active margin. Although the MASZ as a whole may be considered a fairly complicated region with many unusual features and sometimes controversial interpretations, its complexity and unusual characteristics can improve our knowledge about the linkage between deep and surface processes associated with subduction zone dynamics.
► We present the main geodynamic processes along the Middle America subduction zone. ► We proposed a series of models for the Mexican and Central American subduction zones. ► We discuss comparatively the slow slip events and tremors along the subduction zone. ► We examine the seismic anisotropy observations in a geodynamic context.
Geodetically constrained interseismic interplate coupling has been widely used to assess seismic potential in subduction zones. Modeling interseismic deformation is challenging, as it involves ...interplate coupling and often ignores continental internal deformation processes. We present a novel methodology to jointly estimate interplate coupling along with upper plate rigid motion and surface strain, constrained by GNSS‐derived velocities. We use a least squares inversion with a spatially variable Equal Posterior Information Condition Tikhonov regularization, accounting for observational and elastic structure uncertainties. Our modeling reveals three megathrust regions with high tsunamigenic earthquake potential located within the Atacama Seismic Gap (Chile). This study indicates the presence of a downdip segmentation located just above the 1995 (Mw8.0) Antofagasta earthquake rupture, raising concerns for the potential of tsunamigenic earthquake occurrence at shallower depths. Additionally, we show that surface motion is dominated by strain, with rather negligible rigid motion, dismissing the rigid Andean microplate model typically assumed in previous studies.
Plain Language Summary
We present a novel methodology to investigate the degree of coupling (a measure of the earthquake potential) along the plate interface in subduction zones. Here, we infer deformation and rotation of the continental plate together with the degree of coupling, all using Global Positioning System (GPS) measurements of continental surface deformation. We apply this approach for the subduction margin formed by the convergence of Nazca and South‐American plates, and located between the Chilean cities of Antofagasta and La Serena. We find three regions with high seismic potential, raising concerns for future occurrence of large tsunamigenic earthquakes. The first region is located westward of the rupture area of the 1995 (Mw8.0) Antofagasta earthquake, the second region extends for 200 km between the cities of Taltal and Copiapo and the third region extends for 100 km between the cities of Vallenar and La Serena. Our results highlight the importance of estimating continental strain jointly with coupling models.
Key Points
Improved subduction strain accumulation model between 23° and 30°S taking advantage of newly developed inversion schemes
Negligible rigid Andean block motion and fore‐arc extension dominates the Atacama Region (23°–30°S)
Above the 1995 Mw8.0 earthquake, the megathrust remains coupled with high seismic potential
Subducting plates around the globe display a large variability in terms of slab geometry, including regions where smooth and little variation in subduction parameters is observed. While the vast ...majority of subduction slabs plunge into the mantle at different, but positive dip angles, the end-member case of flat-slab subduction seems to strongly defy this rule and move horizontally several hundreds of kilometers before diving into the surrounding hotter mantle. By employing a comparative assessment for the Mexican, Peruvian and Chilean flat-slab subduction zones we find a series of parameters that apparently facilitate slab flattening. Among them, trench roll-back, as well as strong variations and discontinuities in the structure of oceanic and overriding plates seem to be the most important. However, we were not able to find the necessary and sufficient conditions that provide an explanation for the formation of flat slabs in all three subduction zones. In order to unravel the origin of flat-slab subduction, it is probably necessary a numerical approach that considers also the influence of surrounding plates, and their corresponding geometries, on 3D subduction dynamics.
Display omitted
•Multi-reflection time-of-flight mass separator for purification of radioactive ion beams.•Enhanced ion beam purification by stacking of multiple cleaned ion samples in an ...intermediate ion trap to increase the signal intensity of Penning trap mass measurements.•Multi-reflection time-of-flight mass spectrometer for high-precision mass measurements of short-lived species.•Multi-reflection time-of-flight mass analyzer for target and ion-source development of exotic beams.
The online precision mass spectrometer ISOLTRAP at ISOLDE/CERN was recently upgraded by adding a multi-reflection time-of-flight mass separator/spectrometer (MR-ToF MS) between the linear radio-frequency ion trap and the two Penning traps already in place. As a mass separator, the MR-ToF device has improved significantly ISOLTRAP's capability of purification of contaminated ion beams. In addition, the MR-ToF MS can be operated as a mass spectrometer, either to analyze the ISOLDE ion beam or for precision mass measurements of nuclides that are shorter-lived or that have lower yields than those accessible for Penning-trap mass spectrometry. The MR-ToF MS and corresponding components, its integration into ISOLTRAP, and its various operation modes are reviewed. Furthermore, a precision measurement of the 137Eu mass is presented, determined with the help of the MR-ToF device as a mass separator.
Abstract
The tin isotope
100
Sn is of singular interest for nuclear structure due to its closed-shell proton and neutron configurations. It is also the heaviest nucleus comprising protons and ...neutrons in equal numbers—a feature that enhances the contribution of the short-range proton–neutron pairing interaction and strongly influences its decay via the weak interaction. Decay studies in the region of
100
Sn have attempted to prove its doubly magic character
1
but few have studied it from an ab initio theoretical perspective
2,3
, and none of these has addressed the odd-proton neighbours, which are inherently more difficult to describe but crucial for a complete test of nuclear forces. Here we present direct mass measurements of the exotic odd-proton nuclide
100
In, the beta-decay daughter of
100
Sn, and of
99
In, with one proton less than
100
Sn. We use advanced mass spectrometry techniques to measure
99
In, which is produced at a rate of only a few ions per second, and to resolve the ground and isomeric states in
101
In. The experimental results are compared with ab initio many-body calculations. The 100-fold improvement in precision of the
100
In mass value highlights a discrepancy in the atomic-mass values of
100
Sn deduced from recent beta-decay results
4,5
.
We probe the N=82 nuclear shell closure by mass measurements of neutron-rich cadmium isotopes with the ISOLTRAP spectrometer at ISOLDE-CERN. The new mass of ^{132}Cd offers the first value of the ...N=82, two-neutron shell gap below Z=50 and confirms the phenomenon of mutually enhanced magicity at ^{132}Sn. Using the recently implemented phase-imaging ion-cyclotron-resonance method, the ordering of the low-lying isomers in ^{129}Cd and their energies are determined. The new experimental findings are used to test large-scale shell-model, mean-field, and beyond-mean-field calculations, as well as the ab initio valence-space in-medium similarity renormalization group.
The recently confirmed neutron-shell closure at N=32 has been investigated for the first time below the magic proton number Z=20 with mass measurements of the exotic isotopes (52,53)K, the latter ...being the shortest-lived nuclide investigated at the online mass spectrometer ISOLTRAP. The resulting two-neutron separation energies reveal a 3 MeV shell gap at N=32, slightly lower than for 52Ca, highlighting the doubly magic nature of this nuclide. Skyrme-Hartree-Fock-Bogoliubov and ab initio Gorkov-Green function calculations are challenged by the new measurements but reproduce qualitatively the observed shell effect.
Multi-reflection time-of-flight (MR-ToF) spectrometers are devices in which ions are reflected between two electrostatic mirrors to prolong their flight path. The performance of the apparatus relies ...on the stability of the voltages that are used to define the mirror potentials. Especially the voltage of the mirror electrodes at the point where the ions reverse the direction of their axial motion needs to be stable in order to minimize fluctuations of their total flight time. Here we present a method to increase the short- and long-term stability of suitable voltage supplies for enhanced performance of the spectrometer.
PDF
