A light tracker based on scintillating fibers with SiPM readout Mazziotta, M.N.; Altomare, C.; Bissaldi, E. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
09/2022, Letnik:
1039
Journal Article
Recenzirano
We have developed a novel light tracker based on plastic scintillating fiber arrays readout with Silicon Photomultipliers (SiPMs). The tracker consists of multiple planes, with the fibers in each ...plane oriented perpendicularly to those in the adjacent plane, in order to allow 3D track reconstruction. The fibers in each plane have round cross sections, with a diameter of 500μm, and are arranged in two staggered layers in a close-packed configuration. The fibers are readout by means of SiPM arrays with a 250μm strip pitch placed at one of their ends. Scintillating fibers allow a reduced material budget while providing a good spatial resolution and a fast response. This design is therefore suitable to track low-energy particles, such as the lowest energy cosmic rays or the electrons produced in Compton scatterings of gamma rays with energies down to 100 keV. We have built a detector prototype, equipped with Hamamatsu 128-channel SiPM arrays, readout with 32-channel PETIROC2A front-end ASICs. These ASICs are controlled by a custom data acquisition system board equipped with Xilinx Kintex-7 FPGA with self-triggering capabilities. The prototype has been tested with particle beams, cosmic rays and radioactive sources. The tracker design will be presented and performance of the prototype will be discussed.
A compact, light scintillating fiber tracker with SiPM readout Pillera, R.; Altomare, C.; Bissaldi, E. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
March 2023, 2023-03-00, Letnik:
1048
Journal Article
Recenzirano
We present the concept of a novel compact and light tracker based on arrays of plastic scintillating fibers readout with Silicon Photomultipliers (SiPMs). The tracker will be composed of multiple ...planes, with the fibers in each plane oriented perpendicularly to those in the adjacent planes. Each plane will consist of two staggered layers of fibers, having a round cross section with 500 μm diameter and arranged in a close packed configuration. Scintillation photons produced in the fibers will be collected by SiPM arrays with 250 μm strip pitch located at one end of the fibers. This configuration will ensure an accurate spatial resolution and a fast response, while keeping a reduced material budget. Hence, this detector will be suitable to track low energy particles and will be able to efficiently detect the Compton scattered electrons produced by gamma rays with energies down to 100 keV. We built a reduced scale tracker prototype, using Hamamatsu 128 channel SiPM arrays and 32 channel PETIROC2A front end ASICs readout. The latter are controlled by a custom data acquisition board with self triggering capabilities. We tested this prototype with cosmic rays, radioactive sources and accelerated particle beams.
The series of upgrades to the Large Hadron Collider, culminating in the High Luminosity Large Hadron Collider, will enable a significant expansion of the physics program of the CMS experiment. ...However, the accelerator upgrades will also make the experimental conditions more challenging, with implications for detector operations, triggering, and data analysis. The luminosity of the proton–proton collisions is expected to exceed 2–3×1034 cm−2s−1 for Run 3 (starting in 2022), and it will be at least 5×1034 cm−2s−1 when the High Luminosity Large Hadron Collider is completed for Run 4. These conditions will affect muon triggering, identification, and measurement, which are critical capabilities of the experiment. To address these challenges, additional muon detectors are being installed in the CMS endcaps, based on Gas Electron Multiplier technology. For this purpose, 161 large triple-Gas Electron Multiplier detectors have been constructed and tested. Installation of these devices began in 2019 with the GE1/1 station and will be followed by two additional stations, GE2/1 and ME0, to be installed in 2023 and 2026, respectively. The assembly and quality control of the GE1/1 detectors were distributed across several production sites around the world. We motivate and discuss the quality control procedures that were developed to standardize the performance of the detectors, and we present the final results of the production. Out of 161 detectors produced, 156 detectors passed all tests, and 144 detectors are now installed in the CMS experiment. The various visual inspections, gas tightness tests, intrinsic noise rate characterizations, and effective gas gain and response uniformity tests allowed the project to achieve this high success rate.
The upgrade of the CMS detector for the high luminosity LHC (HL-LHC) will include gas electron multiplier (GEM) detectors in the end-cap muon spectrometer. Due to the limited supply of large area GEM ...detectors, the Korean CMS (KCMS) collaboration had formed a consortium with Mecaro Co., Ltd. to serve as a supplier of GEM foils with area of approximately 0.6m2. The consortium has developed a double-mask etching technique for production of these large-sized GEM foils. This article describes the production, quality control, and quality assessment (QA/QC) procedures and the mass production status for the GEM foils. Validation procedures indicate that the structure of the Korean foils are in the designed range. Detectors employing the Korean foils satisfy the requirements of the HL-LHC in terms of the effective gain, response uniformity, rate capability, discharge probability, and hardness against discharges. No aging phenomena were observed with a charge collection of 82mCcm−2. Mass production of KCMS GEM foils is currently in progress.
The high-luminosity phase of the Large Hadron Collider (HL-LHC) will result in ten times higher particle background than measured during the first phase of LHC operation. In order to fully exploit ...the highly-demanding operating conditions during HL-LHC, the Compact Muon Solenoid (CMS) Collaboration will use Gas Electron Multiplier (GEM) detector technology. The technology will be integrated into the innermost region of the forward muon spectrometer of CMS as an additional muon station called GE1∕1. The primary purpose of this auxiliary station is to help in muon reconstruction and to control level-1 muon trigger rates in the pseudo-rapidity region 1.6≤|η|≤2.2. The new station will contain trapezoidal-shaped GEM detectors called GE1∕1 chambers. The design of these chambers is finalized, and the installation is in progress during the Long Shutdown phase two (LS-2) that started in 2019. Several full-size prototypes were built and operated successfully in various test beams at CERN. We describe performance measurements such as gain, efficiency, and time resolution of these prototype chambers, developed after years of R&D, and summarize their behavior in different gas compositions as a function of the applied voltage.
A temperature monitoring system based on fibre Bragg grating (FBG) fibre optic sensors has been developed for the gas electron multiplier (GEM) chambers of the Compact Muon Solenoid (CMS) detector. ...The monitoring system was tested in prototype chambers undergoing a general test of the various technological solutions adopted for their construction. The test lasted about two years and was conducted with the chambers being installed in the CMS detector and operated during regular experimental running. In this paper, we present test results that address the choice of materials and procedures for the production and installation of the FBG temperature monitoring system in the final GEM chambers.
PDF
