Dilijan National Park is one of the most important national parks of Armenia, established in 2002 to protect its rich biodiversity of flora and fauna and to prevent illegal logging. The aim of this ...study is to provide first, a mapping of forest degradation and deforestation, and second, of land cover/land use changes every 5 years over a 28-year monitoring cycle from 1991 to 2019, using Sentinel-2 and Landsat time series and Machine Learning methods. Very High Spatial Resolution imagery was used for calibration and validation purposes of forest density modelling and related changes. Correlation coefficient R2 between forest density map and reference values ranges from 0.70 for the earliest epoch to 0.90 for the latest one. Land cover/land use classification yield good results with most classes showing high users’ and producers’ accuracies above 80%. Although forest degradation and deforestation which initiated about 30 years ago was restrained thanks to protection measures, anthropogenic pressure remains a threat with the increase in settlements, tourism, or agriculture. This case study can be used as a decision-support tool for the Armenian Government for sustainable forest management and policies and serve as a model for a future nationwide forest monitoring system.
Climate change, increasing population and changes in land use are all rapidly driving the need to be able to better understand surface water dynamics. The targets set by the United Nations under ...Sustainable Development Goal 6 in relation to freshwater ecosystems also make accurate surface water monitoring increasingly vital. However, the last decades have seen a steady decline in in situ hydrological monitoring and the availability of the growing volume of environmental data from free and open satellite systems is increasingly being recognized as an essential tool for largescale monitoring of water resources. The scientific literature holds many promising studies on satellite-based surface-water mapping, but a systematic evaluation has been lacking. Therefore, a round robin exercise was organized to conduct an intercomparison of 14 different satellite-based approaches for monitoring inland surface dynamics with Sentinel-1, Sentinel-2, and Landsat 8 imagery. The objective was to achieve a better understanding of the pros and cons of different sensors and models for surface water detection and monitoring. Results indicate that, while using a single sensor approach (applying either optical or radar satellite data) can provide comprehensive results for very specific localities, a dual sensor approach (combining data from both optical and radar satellites) is the most effective way to undertake largescale national and regional surface water mapping across bioclimatic gradients.
Land cover mapping has benefited a lot from the introduction of the Geographic Object-Based Image Analysis (GEOBIA) paradigm, that allowed to move from a pixelwise analysis to a processing of ...elements with richer semantic content, namely objects or regions. However, this paradigm requires to define an appropriate scale, that can be challenging in a large-area study where a wide range of landscapes can be observed. We propose here to conduct the multiscale analysis based on hierarchical representations, from which features known as differential attribute profiles are derived over each single pixel. Efficient and scalable algorithms for construction and analysis of such representations, together with an optimized usage of the random forest classifier, provide us with a semi-supervised framework in which a user can drive mapping of elements such as Small Woody Features at a very large area. Indeed, the proposed open-source methodology has been successfully used to derive a part of the High Resolution Layers (HRL) product of the Copernicus Land Monitoring service, thus showing how the GEOBIA framework can be used in a big data scenario made of more than 38,000 Very High Resolution (VHR) satellite images representing more than 120 TB of data.
The determinants of banks’ voluntary environmental disclosure have been little studied in the literature. Drawing from the assumptions of institutional theory, this paper analyzes the impact of the ...national context, including the general legal system and the environmental policy of states, on banks’ carbon disclosure. Based on three international samples, the results show a positive relationship between the strength of the legal system (degree of law enforcement), the stringency of environmental regulations, environmental performance, and the quality of banks’ carbon disclosure.
The increasing need to find alternative stocks of critical raw materials drives to revisit the residues generated during the former production of mineral and metallic raw materials. Geophysical ...methods contribute to the sustainable characterization of metallurgical residues inferring on their composition, zonation and volume(s) estimation. Nevertheless, more quantitative approaches are needed to link geochemical or mineralogical analyses with the geophysical data. In this contribution, we describe a methodology that integrates geochemical and geophysical laboratory measurements to interpret geophysical field data solving a classification problem. The final aim is to estimate volume(s) of different types of materials to assess the potential resource recovery. We illustrate this methodology with a slag heap composed of residues from a former iron and steel factory. First, we carried out a 3D field acquisition using electrical resistivity tomography (ERT) and induced polarization (IP), based on which, a sampling survey was designed. We conducted laboratory measurements of ERT, IP, spectral induced polarization (SIP), and X-ray fluorescence analysis, based on which, 4 groups of different chemical composition were identified. Then we carried out a 3D probabilistic classification of the field data, based on 2D kernel density estimators (for each group) fitted to the inverted data collocated with the samples. The estimated volumes based on the classification model were: 4.17 × 103 m3 ± 12 %, 1.888 × 105 m3 ± 12 %, 59.4 × 103 m3 ± 19 %, and 2.30 × 104 m3 ± 21% for the groups ordered with an increasing metallic content. The uncertainty ranges were derived from comparing the volumes with and without considering the probabilities associated to the classification. We found that a representative sampling and the definition of the KDE bandwidths are defining elements in the classification and ultimately the estimation of volumes. This methodology is suitable to quantitatively interpret geophysical data in terms of the geochemical composition of the materials, integrating uncertainties both in the classification and the estimation of volumes. Furthermore, several crucial elements in the investigation of metallurgical residues could be applied in a real case study, e.g., geophysical field acquisition, sampling and lab measurements.
•A 3D probabilistic classification of geophysical data was conducted in a slag heap.•Integration of lab-field data leads to quantitative interpretation of geophysical data.•The estimated volumes integrate the uncertainty from the field data interpretation.•Geoelectric methods calibrated with geochemical data can infer in resource recovery.
The purpose of this study was to examine the efficiency of Advanced Space Borne Thermal Emission and Reflection Radiometer (ASTER) data in the discrimination of geological formations and the ...generation of geological map in the northern margin of the Tunisian desert. The nine ASTER bands covering the visible (VIS), near-infrared (NIR) and short-wave infrared (SWIR) spectral regions (wavelength range of 400–2500 nm) have been treated and analyzed. As a first step of data processing, crosstalk correction, resampling, orthorectification, atmospheric correction, and radiometric normalization have been applied to the ASTER radiance data. Then, to decrease the redundancy information in highly correlated bands, the principal component analysis (PCA) has been applied on the nine ASTER bands. The results of PCA allow the validation and the rectification of the lithological boundaries already published on the geologic map, and gives a new information for identifying new lithological units corresponding to superficial formations previously undiscovered. The application of a supervised classification on the principal components image using a support vector machine (SVM) algorithm shows good correlation with the reference geologic map. The overall classification accuracy is 73 % and the kappa coefficient equals to 0.71. The processing of ASTER remote sensing data set by PCA and SVM can be employed as an effective tool for geological mapping in arid regions.
Very high resolution optical remote sensing images (RSI) are often corrupted by noise. Among popular denoising methods in the state of the art, nonlocal Bayes (NLB) has led to successful results on ...real datasets, with high quality and reasonable computation time. However, its computation time remains prohibitive with respect to requirements of operational RSI pipelines, such as Pléiades one. In this paper, we tackle such an issue and introduce several optimizations aiming to significantly reduce the computation time required by NLB while keeping the best denoising quality (i.e., preserving edges, textures, and homogeneous areas). More precisely, our improvements consist of reducing multiple estimations of a same pixel with a masking technique and modifying the spatial extent of the similar patch search area (i.e., one of the main parts of nonlocal algorithms, such as NLB). We report several experiments and discuss optimal settings for these parameters, allowing a gain in computation time of 50% (resp. 15%) with optimized masking strategy (resp. spatial extent of the search area). When both contributions are combined, we achieve the same denoising quality as standard NLB while doubling the computation efficiency, the latter being increased fivefold if we accept a very small (lower than 0.1%) loss in quality.
Satellite Image Time Series (SITS) are becoming available at high spatial, spectral and temporal resolutions across the globe by the latest remote sensing sensors. These series of images can be ...highly valuable when exploited by classification systems to produce frequently updated and accurate land cover maps. The richness of spectral, spatial and temporal features in SITS is a promising source of data for developing better classification algorithms. However, machine learning methods such as Random Forests (RF), despite their fruitful application to SITS to produce land cover maps, are structurally unable to properly handle intertwined spatial, spectral and temporal dynamics without breaking the structure of the data. Therefore, the present work proposes a comparative study of various deep learning algorithms from the Convolutional Neural Network (CNN) family and evaluate their performance on SITS classification. They are compared to the processing chain coined iota2, developed by the CESBIO and based on a RF model. Experiments are carried out in an operational context using with sparse annotations from 290 labeled polygons. Less than 80 000 pixel time series belonging to 8 land cover classes from a year of Sentinel-2 monthly syntheses are used. Results show on a test set of 131 polygons that CNNs using 3D convolutions in space and time are more accurate than 1D temporal, stacked 2D and RF approaches. Best-performing models are CNNs using spatio-temporal features, namely 3D-CNN, 2D-CNN and SpatioTempCNN, a two-stream model using both 1D and 3D convolutions.
PDF
