Estimates of atmospheric inputs to the Mediterranean and some coastal areas are reviewed, and uncertainities in these estimates considered. Both the magnitude and the mineralogical composition of ...atmospheric dust inputs indicate that eolian deposition is an important (50%) or even dominant (>80%) contribution to sediments in the offshore waters of the entire Mediterranean basin. Model data for trace metals and nutrients indicate that the atmosphere delivers more than half the lead and nitrogen, one-third of total phosphorus, and 10% of the zinc entering the entire basin. Measured data in sub-basins, such as the north-western Mediterranean and northern Adriatic indicate an even greater proportions of atmospheric versus riverine inputs. When dissolved fluxes are compared (the form most likely to impinge on surface water biogeochemical cycles), the atmosphere is found to be 5 to 50 times more important than rivers for dissolved zinc and 15 to 30 times more important for lead fluxes. Neglecting co-limitation by other nutrients, new production supported by atmospheric nitrogen deposition ranges from 2-4 g C/m super(2)/yr, whereas atmospheric phosphorus deposition appears to support less than 1 g C/m super(2)/yr. In spite of the apparently small contribution of atmospheric deposition to overall production in the basin it has been suggested that certain episodic phytoplankton blooms are triggered by atmospheric deposition of N, P or Fe. Future studies are needed to clarify the extent and causal links between these episodic blooms and atmospheric/oceanographic forcing functions. A scientific program aimed at elucidating the possible biogeochemical effects of Saharan outbreaks in the Mediterranean through direct sampling of the ocean and atmosphere before and after such events is therefore highly recommended.
The Venice Lagoon (VL) is a complex ecosystem in which public participation and area-based management has often been neglected by administrative bodies involved in the planning of coastal projects ...and public works. In this area, the analysis of the local situation highlighted a substantial absence of coordination among the various administrative bodies in charge of planning and management at various governmental levels and in different regulated economic sectors. This paper analyses public participation and collaboration with reference to the Integrated Coastal Management context (ICM). The paper examines specific requirements, constraints, and opportunities for the complex case of the VL where participatory management and institutional coordination need enhancement.PUBLICATION ABSTRACT
Atmospheric deposition in the lagoon of Venice and river inputs from the watershed were collected and analysed from 1998 to 1999 using the same analytical methods. The input from riverine sources ...largely prevails (>70%) over that from the atmosphere for As, Cr, Fe, Mn, Ni, nitrogen and phosphorus. Equivalent amounts of Hg, Pb, PCBs, HCB are discharged into the lagoon from the two sources, whilst atmospheric inputs prevail for Cd, ammonia and dioxins. A comparison with figures of maximum allowable discharges (MAD) for various compounds, recently set by the Italian Ministry for the Environment, showed that total inputs (riverine + atmospheric) of trace metals were below the MAD thresholds only for Cr, Cu, Ni and Zn. The total inputs of Cu and Ni, and Cr and Zn were approximately 20 and 40% of the MAD limit, respectively. The total phosphorus input of 284 t was close to the imposed limit, whilst the inorganic nitrogen load alone (>4000 t) was much higher than the MAD for total nitrogen. For those metals (As, Cd, Hg and Pb) and persistent organic pollutants, such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) where the MAD states that the load should tend to '0' (no discharge), the measured inputs of 4.8 (As) and 5.1 t (Pb), 151 (Cd) and 39 kg (Hg), 18 g (PCDD/Fs) and 440 mg (Toxicity Equivalents, TEQs, of PCDD/Fs) are by definition 'above' the MAD. The principal component analysis (PCA) of loading data and input profiles (markers) of production typologies showed that river and atmosphere contributions can be easily separated and recognised due to their different fingerprints. Riverine inputs were similar to chemical and glass work production markers, whereas atmospheric loadings were mainly influenced by chemical industry (PVC and VCM production), metallurgy and paper-mill.PUBLICATION ABSTRACT
Trace metal (As, Cd, Cr, Ni, Hg, Pb) concentrations in soil samples collected around the Porto Marghera (Italy) industrial zone (2-40 km) near the city of Venice were compared with direct ...measurements of atmospheric deposition measured at comparable distances from the same source. Concentrations of Cd and Pb in soils decreased exponentially with increasing distance from the source; less clear signals were detected for As, Cr and Ni. Significant differences were found among the soils, which were partially resolved when their clay contents were normalised. Preliminary comparisons of fluxes of Cd and Pb derived from soil with direct deposition measurements showed increasing values with longer integration times. Annual Cd and Pb flux values of one year of direct deposition were 5 to 10 times lower than mean annual fluxes derived from soils,integrating 50 to 100 years. Values range from 0.1-0.4 to 1-2 mg m super(-2) yr super(-1) for Cd, and from 3-18 to 50-100 mg m super(-2) yr super(-1) for Pb. These results fit information on `historical' emission trends as recorded in sediments of the lagoon.
Surface and deep-sea core sediments and two sets of standards were measured by three different techniques — Galai Cis-1 laser system, Coulter Counter TA II, and Micromeritics SediGraph 5000D — in ...order to compare the Galai results with the other two. The differences between the three types of measuring device turned out to be greater in sediments than in standards, and were attributed to the physical properties, shape, density and composition of the particles (complexity of the matrix). Comparison of moment statistics showed that the Galai determines coarser grain sizes than the Coulter and finer than the SediGraph, particularly as regards analysis of surface sediments. The relationships between Galai and SediGraph were estimated using analysis of variation/residuals within individual intervals. The analysis showed a higher variability of residuals for the coarser fractions (8–16 μm and 16–32 μm) with respect to the finer (2–4 μm and 4–8 μm) fractions. The <2 μm SediGraph fraction, with a cut-off at 0.49 μm, showed good correspondence with the <2.5 μm Galai analysis.