The Time-Of-Flight (TOF) detector of the ALICE experiment at the CERN LHC is based on Multi-gap Resistive Plate Chambers (MRPCs) technology. During the 2009-2013 data taking the TOF system had very ...stable operations with a total time resolution of 80ps. Details of the different calibration procedures and performance with data from collisions at the LHC will be described.
The ecological transition of the extreme energy events experiment Abbrescia, M.; Avanzini, C.; Baldini, L. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
10/2023, Letnik:
1055
Journal Article
Recenzirano
The need for reducing the emission of gases, potentially contributing to the greenhouse effect and climate change, has impacted many fields, including scientific research. The Extreme Energy Event ...(EEE) collaboration started, already several years ago, a series of tests aiming at finding a more eco-friendly replacement for the gases used in the Multigap Resistive Plate Chambers (MRPCs) of its network.
These tests identified a promising binary gas mixture, and data taking has begun with a subset of the telescopes of the EEE network, making EEE the first experiment in the world completely implemented with MRPCs and operating with an eco-friendly gas mixture. Here the results of the tests and a preliminary comparison of the telescope performance measured with the standard (non eco-friendly) and the new eco-friendly gas mixtures are presented and discussed.
After its successful campaign of measurements beyond the Polar Arctic Circle, the PolarquEEEst experiment measured the cosmic charged particle rate at sea level in a latitude interval between 35
∘
N ...and 82
∘
N. In this paper, these measurements are described and the corresponding results are discussed.
Studies on new Eco-gas mixtures for Extreme Energy Events Project Bossini, E.; Abbrescia, M.; Avanzini, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
01/2023, Letnik:
1046
Journal Article
Recenzirano
The Extreme Energy Events (EEE) experiment, a joint project of the Centro Fermi and INFN Italian national research institutes, has a dual purpose: a scientific research program for measurements of ...the cosmic rays flux at ground level and an intense outreach and educational program with an active contribution of students and teachers in the construction and operation of the detectors in High Schools. The network counts 60 tracking detectors, each made by three Multigap Resistive Plate Chambers (MRPC), operated so far with a gas mixture composed by 98% C2H2F4 and 2% SF6. Given its high Global Warming Potential (GWP), the collaboration, since few years, started a R&D on alternative mixtures environmentally sustainable. Latest results on a C3H2F4 + He eco-friendly mixture are here presented.
The Extreme Energy Event (EEE) experiment is devoted to the search of high energy cosmic rays through a network of telescopes installed in about 50 high schools distributed throughout the Italian ...territory. This project requires a peculiar data management infrastructure to collect data registered in stations very far from each other and to allow a coordinated analysis. Such an infrastructure is realized at INFN-CNAF, which operates a Cloud facility based on the OpenStack opensource Cloud framework and provides Infrastructure as a Service (IaaS) for its users. In 2014 EEE started to use it for collecting, monitoring and reconstructing the data acquired in all the EEE stations. For the synchronization between the stations and the INFN-CNAF infrastructure we used BitTorrent Sync, a free peer-to-peer software designed to optimize data syncronization between distributed nodes. All data folders are syncronized with the central repository in real time to allow an immediate reconstruction of the data and their publication in a monitoring webpage. We present the architecture and the functionalities of this data management system that provides a flexible environment for the specific needs of the EEE project.
The Extreme Energy Events (EEE) ‘telescope’ is made by 3 Multigap Resistive Plate Chambers (MRPC), each with an active area of 158x82 cm2 in size. Each detector is part of a large network of about ...sixty telescopes spread over the Italian territory. Due to the good tracking capabilities (100 ps time resolution and cm2 spatial resolution) the EEE telescope can be used also as test station for large area detectors. The link between the EEE track and signals from the detector under test can be obtained by implementing a streaming DAQ with a common time reference between the two systems given by the GPS signal. The installation and first results of the cosmic muon test facility with the EEE MRPC telescope based on the low-cost, streaming-compatible 12 channels, 250MHz, 14 bits digitizer (INFN-WaveBoard or WB) developed by the JLAB12 Collaboration, is presented.
Various experiments are searching for detectors that can cover large areas (as in the present LHC experiments) with excellent timing performances and insensitivity to magnetic field. A detector based ...on scintillators coupled to SiPM can fulfil these requirements. SiPMs are indeed replacing the standard PhotoMultiplier technology thanks to the many advantages, with the corresponding possibility to achieve also higher segmentations in calorimetry or other applications. Also in view of future colliders experiments like HL-LHC or FCC or medical applications like TOF-PET, an important R&D on timing performances of SiPMs-scintillator detectors has begun, with the goal of including them in the list of possible 4-D tracking-timing devices.
An R&D on SiPM coupled to scintillator time resolution has been performed in a cosmic ray setup. Different kind of SiPMs, geometries of SiPMs coupled to the scintillator and different size of scintillator have been also studied. A time resolution of ∼69 ps, comprehensive of the full electronic chain, from the front-end to the readout electronics, has been achieved with SiPMs coupled to a 2x2x3 cm3 plastic scintillator.
The aim of this work is to extend to LHC the results observed for two-particle correlations at RHIC, especially in terms of jet quenching effects. In this study a parton quenching model developed in ...the BDMPS-Z-SW framework is considered and implemented as an afterburner for PYTHIA and HIJING. A simplified parametrization of the quenching mechanism at the parton level is included in one of the most popular Monte Carlo event generators for AA collisions, HIJING. The simulation method, tuned on the RHIC data, is then used to make predictions for the LHC energy regime in order to probe the scenario we will study in the ALICE experiment.
The new trigger/GPS module for the EEE project Panetta, M.P.; Abbrescia, M.; Avanzini, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2019, Letnik:
936
Journal Article
Recenzirano
Odprti dostop
The Extreme Energy Events Project is an experiment devoted to the study of the Extensive Atmospheric Showers (EAS) which consists of a network of Multigap Resistive Plate Chambers (MRPCs) muon ...telescopes distributed over a very large area ∼3times105km2. It requires a precise time synchronization to correlate the information collected from each single detector. The data acquisition system of each telescope is equipped with a trigger unit and a GPS receiver to perform precision timing of events. The Global Positioning System (GPS) unit provides the one pulse per second signal (1PPS) which is used to create a timestamp in UTC time. A novel VME trigger unit for the EEE telescopes was developed, including an embedded GPS engine for timing application. The trigger/GPS unit is presented, including some preliminary measurements of its time resolution.
•The VME trigger unit includes an engine GPS to create the timestamp in UTC time.•The absolute time of an event is built by adding both the TDCs and the GPS data.•GPS unit provides the one pulse per second signal (1PPS) to synchronize the TDCs.•The time resolution measured for the 1PPS is less then ∼5 ns.