Physics analysis at the Compact Muon Solenoid requires both the production of simulated events and processing of the data collected by the experiment. Since the end of the LHC Run-I in 2012, CMS has ...produced over 20 billion simulated events, from 75 thousand processing requests organised in one hundred different campaigns. These campaigns emulate different configurations of collision events, the detector, and LHC running conditions. In the same time span, sixteen data processing campaigns have taken place to reconstruct different portions of the Run-I and Run-II data with ever improving algorithms and calibrations. The scale and complexity of the events simulation and processing, and the requirement that multiple campaigns must proceed in parallel, demand that a comprehensive, frequently updated and easily accessible monitoring be made available. The monitoring must serve both the analysts, who want to know which and when datasets will become available, and the central production teams in charge of submitting, prioritizing, and running the requests across the distributed computing infrastructure. The Production Monitoring Platform (pMp) web-based service, has been developed in 2015 to address those needs. It aggregates information from multiple services used to define, organize, and run the processing requests. Information is updated hourly using a dedicated elastic database and the monitoring provides multiple configurable views to assess the status of single datasets as well as entire production campaigns. This contribution will describe the pMp development, the evolution of its functionalities, and one and half year of operational experience.
Although the efficiency of steel fibres for improving mechanical properties (cracking resistance and failure toughness) of the concrete has been broadly discussed in the literature, the number of ...studies dedicated to the fibre effect on structural behaviour of the externally bonded elements is limited. This experimental study investigates the influence of steel fibres on the failure character of concrete elements strengthened with external carbon fibre reinforced polymer sheets. The elements were subjected to different loading conditions. The test data of four ties and eight beams are presented. Different materials were used for the internal bar reinforcement: in addition to the conventional steel, high-grade steel and glass fibre reinforced polymer bars were also considered. The experimental results indicated that the fibres, by significantly increasing the cracking resistance, alter the failure character from splitting of the concrete to the bond loss of the external sheets and thus noticeably increase the load bearing capacity of the elements.
Aims The objective of this study was to assess diabetes care in outpatient diabetes clinics in the Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Slovakia and Slovenia.
Methods ...Questionnaires for each randomly enrolled patient were completed by an endocrinologist or diabetologist. Data concerning age, sex, diabetes duration, diabetes type, treatment type, glycated haemoglobin (HbA1c), total cholesterol (TC), low‐density lipoprotein cholesterol (LDL‐C), triglycerides (TG) and high‐density lipoprotein cholesterol (HDL‐C), blood pressure (BP) and short‐ and long‐term diabetes complications were recorded. Questionnaires were analysed centrally for each country and stratified for Type 1 diabetes (T1D), Type 2 diabetes (T2D) and other types of diabetes.
Results Data on 10 950 individuals were analysed (mean population age 56.2 years; females 52%; T1D 22.9%; T2D 75.3%; mean time from diagnosis 11 years). Patients with HbA1c within target (< 6.5%): T1D 13.1%, T2D 21.4%; for TC levels (< 4.5 mmol/l): T1D 37%, T2D 20%; for TG levels (< 1.7 mmol/l): T1D 78%, T2D 44%; for HDL‐C (> 1.1 mmol/l): T1D 81%, T2D 60%; for LDL‐C (< 2.5 mmol/l): T1D 36%, T2D 23%; for BP (< 130/80 mm Hg): T1D 42%, T2D 9%. The prevalence of severe hypoglycaemia (within the last 6 months) was 12% in T1D and 2% in T2D. Prevalence of diabetic ketoacidosis was 0.3–6.6%, blindness 0.15–1.3% and diabetic nephropathy 19–42%.
Conclusions The data show the current quality of care and potential areas for improvement. The quality of care is generally comparable with that in Western Europe.
Objective and design
It has been demonstrated that changes in the normal-appearing white matter (NAWM) in multiple sclerosis precede the appearance of classical lesions. The understanding of NAWM ...biology in an established disease model might help to clarify why some of them progress to active demyelinating lesions.
Material or subjects
C57BL6 male mice (19–21 g) were used in this study.
Treatment
Demyelination was induced by feeding mice a diet containing 0.2% cuprizone for up to 5 weeks.
Methods
Routine stainings (luxol fast blue, and hematoxylin and eosin) and immunohistochemistry were performed to assess myelin status and the inflammatory infiltrate.
Results
We demonstrated that, in the toxic demyelination cuprizone model, the corpus callosum is severely demyelinated after a 5-week cuprizone challenge (acute demyelination) whereas the fimbria of the hippocampus appear normal in routine myelin stainings. Microgliosis but not astrogliosis is evident after acute demyelination in the fimbria. Interestingly, both regions, the fimbria and the corpus callosum, demonstrated early oligodendrocyte apoptosis as well as intense microglia accumulation and activation. However, only the corpus callosum progresses to actively demyelination lesions whereas the fimbria does not.
Conclusions
The applied model appears suitable for elucidating pathways which promote progression of affected tissue to an active lesion.
To provide certified athletic trainers, team physicians, emergency responders, and other health care professionals with recommendations on how to best manage a catastrophic cervical spine injury in ...the athlete.
The relative incidence of catastrophic cervical spine injury in sports is low compared with other injuries. However, cervical spine injuries necessitate delicate and precise management, often involving the combined efforts of a variety of health care providers. The outcome of a catastrophic cervical spine injury depends on the efficiency of this management process and the timeliness of transfer to a controlled environment for diagnosis and treatment.
Recommendations are based on current evidence pertaining to prevention strategies to reduce the incidence of cervical spine injuries in sport; emergency planning and preparation to increase management efficiency; maintaining or creating neutral alignment in the cervical spine; accessing and maintaining the airway; stabilizing and transferring the athlete with a suspected cervical spine injury; managing the athlete participating in an equipment-laden sport, such as football, hockey, or lacrosse; and considerations in the emergency department.
An analysis of test results performed by common type of direct shear apparatuses shows that normal stress on the shear plane of soil sample is not equal to vertical component of distributed external ...load applied to the top of soil sample. Performed measurements cleared that only 65–85% of total vertical load is transmitted to the sample shear plane. Thus, determining of the soil shear strength depends on shear apparatus construction, i.e. on actual magnitude of vertical load transmitted to the shear plane. The paper presents an analysis of shear strength parameters of sand determined by two different construction of direct shear apparatuses with movable lower shear ring. The soil shear strength parameters by employing direct shear apparatus SPF-2 have been obtained under constant vertical load and measuring the vertical load at different positions, namely: at the bottom and that of at the top of soil sample, respectively. The soil strength parameters by employing the universal shear testing device ADS 1/3 were determined under two conditions, namely: by maintaining constant soil volume and that of for constant vertical load, respectively. In both cases the vertical load was measured at the top of soil sample.
The capacity of steel fibers to ensure the structural integrity of reinforced concrete specimens coated with CFRP sheets was investigated. Test data for four ties and eight beams reinforced with ...steel or glass-FRP bars are presented. Experiments showed that the fibers significantly increased the cracking resistance and altered the failure character from the splitting of concrete to the debonding of the external sheets, which noticeably increased the load-carrying capacity of the strengthened specimens.
To present a comprehensive review of the anatomy, biomechanics, and mechanisms of tibiofibular syndesmosis ankle sprains.
MEDLINE (1966-1998) and CINAHL (1982-1998) searches using the key words ...syndesmosis, tibiofibular, ankle injuries, and ankle injuries-etiology.
Stability of the distal tibiofibular syndesmosis is necessary for proper functioning of the ankle and lower extremity. Much of the ankle's stability is provided by the mortise formed around the talus by the tibia and fibula. The anterior and posterior inferior tibiofibular ligaments, the interosseous ligament, and the interosseous membrane act to statically stabilize the joint. During dorsiflexion, the wider portion anteriorly more completely fills the mortise, and contact between the articular surfaces is maximal. The distal structures of the lower leg primarily prevent lateral displacement of the fibula and talus and maintain a stable mortise. A variety of mechanisms individually or combined can cause syndesmosis injury. The most common mechanisms, individually and particularly in combination, are external rotation and hyperdorsiflexion. Both cause a widening of the mortise, resulting in disruption of the syndesmosis and talar instability. CONCLUSIONS AND RECOMMENDATION: Syndesmosis ankle injuries are less common than lateral ankle injuries, are difficult to evaluate, have a long recovery period, and may disrupt normal joint functioning. To effectively evaluate and treat this injury, clinicians should have a full understanding of the involved structures, functional anatomy, and etiologic factors.
Monte Carlo Production Management at CMS Boudoul, G; Franzoni, G; Norkus, A ...
Journal of physics. Conference series,
01/2015, Letnik:
664, Številka:
7
Journal Article
Recenzirano
Odprti dostop
The analysis of the LHC data at the Compact Muon Solenoid (CMS) experiment requires the production of a large number of simulated events. During the RunI of LHC (20102012), CMS has produced over 12 ...Billion simulated events, organized in approximately sixty different campaigns each emulating specific detector conditions and LHC running conditions (pile up). In order to aggregate the information needed for the configuration and prioritization of the events production, assure the book-keeping of all the processing requests placed by the physics analysis groups, and to interface with the CMS production infrastructure, the web- based service Monte Carlo Management (McM) has been developed and put in production in 2013. McM is based on recent server infrastructure technology (CherryPy + AngularJS) and relies on a CouchDB database back-end. This contribution covers the one and half year of operational experience managing samples of simulated events for CMS, the evolution of its functionalities and the extension of its capability to monitor the status and advancement of the events production.