Semiconductor materials have been shown to have good photocatalytic behavior and can be utilized for the photodegradation of organic pollutants. In this work, three-dimensional flower-like SnS₂ (tin ...sulfide) was synthesized by a facile hydrothermal method. Core-shell structured SiO₂@α-Fe₂O₃ nanocomposites were then deposited on the top of the SnS₂ flowers. The as-synthesized nanocomposites were characterized by X-ray diffraction (XRD), Raman spectroscopy, field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), UV⁻Vis Spectroscopy, Brunauer⁻Emmett⁻Teller (BET) surface area analysis, and photoluminescence (PL) spectroscopy. The photocatalytic behavior of the SnS₂-SiO₂@α-Fe₂O₃ nanocomposites was investigated by observing the degradation of methylene blue (MB). The results show an effective enhancement of photocatalytic activity for the degradation of MB especially for the 15 wt % SiO₂@α-Fe₂O₃ nanocomposites on SnS₂ flowers.
In this article, we study the robust quantized feedback control problem for nonlinear discrete-time systems that are described by Takagi-Sugeno (T-S) fuzzy model with norm-bounded uncertainties. The ...dynamic quantizer composed of a dynamic parameter and a static quantizer is considered to quantize the control input signal. An improved two-step approach to design controller and dynamic quantizer for T-S fuzzy system is proposed based on the LMI technique. In the first step, a robust controller is designed to guarantee that the quantized fuzzy closed-loop system with norm-bounded uncertainties is asymptotically stable with prescribed <inline-formula><tex-math notation="LaTeX">\mathcal {H}_{\infty }</tex-math></inline-formula> performance. Then, the parameter-dependent (membership function) scalar variable is obtained to determine the dynamic quantizer's parameter in the second step. Finally, the simulation result of truck-trailer system is presented to validate the effectiveness and feasibility of the proposed two-step design approach.
Metal–organic frameworks (MOFs) have emerged as one of the most widely investigated materials in catalysis mainly due to their excellent component tunability, high surface area, adjustable pore size, ...and uniform active sites. However, the overwhelming number of MOF materials and complex structures has brought difficulties for researchers to select and construct suitable MOF‐based catalysts. Herein, a programmable design strategy is presented based on metal ions/clusters, organic ligands, modifiers, functional materials, and post‐treatment modules, which can be used to design the components, structures, and morphologies of MOF catalysts for different reactions. By establishing the corresponding relationship between these modules and functions, researchers can accurately and efficiently construct heterometallic MOFs, chiral MOFs, conductive MOFs, hierarchically porous MOFs, defective MOFs, MOF composites, and MOF‐derivative catalysts. Further, this programmable design approach can also be used to regulate the physical/chemical microenvironments of pristine MOFs, MOF composites, and MOF‐derivative materials for heterogeneous catalysis, electrocatalysis, and photocatalysis. Finally, the challenging issues and opportunities for the future research of MOF‐based catalysts are discussed. Overall, the modular design concept of this review can be applied as a potent tool for exploring the structure–activity relationships and accelerating the on‐demand design of multicomponent catalysts.
Recent key progress achieved in designing metal–organic framework (MOF)‐based catalysts, the active sites, and associated regulation strategies is summarized. Besides, the effects of metal ions, organic ligands, modifiers, functional materials, and post‐treatment modules on the compositions, structures, and morphologies are also highlighted. Modular design may inspire researchers who attempt to develop MOF‐based catalysts with desired functional properties.
Emerging evidence indicates that inflammasome-induced inflammation plays a crucial role in the pathogenesis of Parkinson's disease (PD). Several proteins including α-synuclein trigger the activation ...of NLRP3 inflammasome. However, few studies examined whether inflammasomes are activated in the periphery of PD patients and their possible value in the diagnosis or tracking of the progress of PD. The aim of this study was to determine the association between inflammasome-induced inflammation and clinical features in PD.
There were a total of 67 participants, including 43 patients with PD and 24 controls, in the study. Participants received a complete evaluation of motor and non-motor symptoms, including Hoehn and Yahr (H-Y) staging scale. Blood samples were collected from all participants. The protein and mRNA expression levels of inflammasomes subtypes and components in peripheral blood mononuclear cells (PBMCs) were determined using western blotting and RT-qPCR. We applied Meso Scale Discovery (MSD) immunoassay to measure the plasma levels of IL-1β and α-synuclein.
We observed increased gene expression of NLRP3, ASC, and caspase-1 in PBMCs, and increased protein levels of NLRP3, caspase-1, and IL-1β in PD patients. Plasma levels of IL-1β were significantly higher in patients with PD compared with controls and have a positive correlation with H-Y stage and UPDRS part III scores. Furthermore, plasma α-synuclein levels were also increased in PD patients and have a positive correlation with both UPDRS part III scores and plasma IL-1β levels.
Our data demonstrated that the NLRP3 inflammasome is activated in the PBMCs from PD patients. The related inflammatory cytokine IL-1β and total α-synuclein in plasma were increased in PD patients than controls, and both of them presented a positive correlation with motor severity in patients with PD. Furthermore, plasma α-synuclein levels have a positive correlation with IL-1β levels in PD patients. All these findings suggested that the NLRP3 inflammasome activation-related cytokine IL-1β and α-synuclein could serve as non-invasive biomarkers to monitor the severity and progression of PD in regard to motor function.
Pharmaceutical residues are emerging pollutants in the aquatic environment and their removal by conventional wastewater treatment methods has proven to be ineffective. This research aimed to develop ...a three-dimensional reduced graphene oxide aerogel (rGOA) for the removal of diclofenac in aqueous solution. The preparation of rGOA involved facile self-assembly of graphene oxide under a reductive environment of L-ascorbic acid. Characterisation of rGOA was performed by Fourier transform infrared, scanning electron microscope, transmission electron microscopy, nitrogen adsorption-desorption, Raman spectroscopy and X-ray diffraction. The developed rGOA had a measured density of 20.39 ± 5.28 mg/cm3, specific surface area of 132.19 m2/g, cumulative pore volume of 0.5388 cm3/g and point of zero charge of 6.3. A study on the simultaneous interactions of independent factors by response surface methodology suggested dosage and initial concentration as the dominant parameters influencing the adsorption of diclofenac. The highest diclofenac adsorption capacity (596.71 mg/g) was achieved at the optimum conditions of 0.25 g/L dosage, 325 mg/L initial concentration, 200 rpm shaking speed and 30 °C temperature. The adsorption equilibrium data were best fitted to the Freundlich model with correlation coefficient (R2) varying from 0.9500 to 0.9802. The adsorption kinetic data were best correlated to the pseudo-first-order model with R2 ranging from 0.8467 to 0.9621. Thermodynamic analysis showed that the process was spontaneous (∆G = − 7.19 to − 0.48 kJ/mol) and exothermic (∆H = − 12.82 to − 2.17 kJ/mol). This research concluded that rGOA is a very promising adsorbent for the remediation of water polluted by diclofenac.
•3D graphene aerogel was assembled by chemical reduction and freeze drying.•Optimisation by response surface methodology yielded highest q of 596.71 mg/g.•Optimum states: 0.25 g/L dosage, 325 mg/L concentration, 200 rpm shaking, 30 °C.•Adsorption equilibrium was best described by the Freundlich model.•Adsorption kinetic was best fitted to the pseudofirst-order kinetic model.
Increasing evidence supports the finding that patients undergoing a total knee arthroplasty with high-volume physicians and hospitals achieve better outcomes. Unfortunately, the existing definitions ...for high-volume surgeons and hospitals are highly variable and entirely arbitrary. The aim of this study was to identify a set of meaningful hospital and surgeon total knee arthroplasty volume thresholds.
Using 289,976 patients undergoing primary total knee arthroplasty from an administrative database, we applied stratum-specific likelihood ratio (SSLR) analysis of a receiver operating characteristic (ROC) curve to generate sets of volume thresholds most predictive of adverse outcomes. The outcomes considered for surgeon volume included 90-day complication and 2-year revision. For hospital volume, we considered 90-day complications and 90-day mortality.
SSLR analysis of the ROC curves for 90-day complication and 2-year revision rates by surgeon volume identified four volume categories: 0 to 12, 13 to 59, 60 to 145, and ≥146 total knee arthroplasties per year. Complication rates decreased significantly (p < 0.05) in progressively higher-volume categories. Revision rates followed a similar pattern, but did not decrease between surgeons performing 60 to 145 arthroplasties per year and those performing ≥146 arthroplasties per year. SSLR analysis of 90-day complication and 90-day mortality rates by hospital volume also identified four volume categories: 0 to 89, 90 to 235, 236 to 644, and ≥645 total knee arthroplasties per year. Complication rates decreased significantly (p < 0.05) in progressively higher-volume categories, but the rates did not decrease between hospitals performing 236 to 644 arthroplasties per year and those performing ≥645 arthroplasties per year. Mortality rates for hospitals with ≥645 total knee arthroplasties per year were significantly lower (p < 0.05) than those below the threshold.
Our study supports the use of SSLR analysis of ROC curves for risk-based volume stratification in total knee arthroplasty volume-outcomes research. SSLR analysis established meaningful volume definitions for low, medium, high, and very high-volume total knee arthroplasty surgeons and hospitals. This should help patients, surgeons, hospitals, and policymakers to make decisions with regard to the optimal delivery of total knee arthroplasty.
Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.
A simple method based on surface-enhanced Raman scattering (SERS) was developed for the rapid determination of alternariol (AOH) in pear fruits using an easily prepared silver-nanoparticle (AgNP) ...substrate. The AgNP substrate was modified by pyridine to circumvent the weak affinity of the AOH molecules to the silver surface and to improve the sensitivity of detection. Quantitative analysis was performed in AOH solutions at concentrations ranging from 3.16 to 316.0 μg/L, and the limit of detection was 1.30 μg/L. The novel method was also applied to the detection of AOH residues in pear fruits purchased from the market and in pear fruits that were artificially inoculated with Alternaria alternata. AOH was not found in any of the fresh fruit, whereas it resided in the rotten and inoculated fruits. Finally, the SERS method was cross validated against HPLC. It was revealed that the SERS method has great potential utility in the rapid detection of AOH in pear fruits and other agricultural products.
Head and neck cancer is a highly genetic and metabolic heterogeneous collection of malignancies of the lip, oral cavity, salivary glands, pharynx, esophagus, paranasal sinuses, and larynx with ...five-year survival rates ranging from 12% to 93%. Patients with head and neck cancer typically present with advanced stage III, IVa, or IVb disease and are treated with comprehensive modality including chemotherapy, radiotherapy, and surgery. Despite advancements in treatment modality and technique, noisome recurrence, invasiveness, and resistance as well as posttreatment complications severely influence survival rate and quality of life. Thus, new therapeutic strategies are urgently needed that offer enhanced efficacy with less toxicity. ROS in cancer cells plays a vital role in regulating cell death, DNA repair, stemness maintenance, metabolic reprogramming, and tumor microenvironment, all of which have been implicated in resistance to chemo-/radiotherapy of head and neck cancer. Adjusting ROS generation and elimination to reverse the resistance of cancer cells without impairing normal cells show great hope in improving the therapeutic efficacy of chemo-/radiotherapy of head and neck cancer. In the current review, we discuss the pivotal and targetable redox-regulating system including superoxide dismutases (SODs), tripeptide glutathione (GSH), thioredoxin (Trxs), peroxiredoxins (PRXs), nuclear factor erythroid 2-related factor 2/Kelch-like ECH-associated protein 1 (Nrf2/keap1), and mitochondria electron transporter chain (ETC) complexes and their roles in regulating ROS levels and their clinical significance implicated in chemo-/radiotherapy of head and neck cancer. We also summarize several old drugs (referred to as the non-anti-cancer drugs used in other diseases for a long time) and small molecular compounds as well as natural herbs which effectively modulate cellular ROS of head and neck cancer to synergize the efficacy of conventional chemo-/radiotherapy. Emerging interdisciplinary techniques including photodynamic, nanoparticle system, and Bio-Electro-Magnetic-Energy-Regulation (BEMER) therapy are promising measures to broaden the potency of ROS modulation for the benefit of chemo-/radiotherapy in head and neck cancer.