Water vapor condensation is commonly observed in nature and routinely used as an effective means of transferring heat with dropwise condensation on nonwetting surfaces exhibiting heat transfer ...improvement compared to filmwise condensation on wetting surfaces. However, state-of-the-art techniques to promote dropwise condensation rely on functional hydrophobic coatings that either have challenges with chemical stability or are so thick that any potential heat transfer improvement is negated due to the added thermal resistance of the coating. In this work, we show the effectiveness of ultrathin scalable chemical vapor deposited (CVD) graphene coatings to promote dropwise condensation while offering robust chemical stability and maintaining low thermal resistance. Heat transfer enhancements of 4× were demonstrated compared to filmwise condensation, and the robustness of these CVD coatings was superior to typical hydrophobic monolayer coatings. Our results indicate that graphene is a promising surface coating to promote dropwise condensation of water in industrial conditions with the potential for scalable application via CVD.
Digital logic for soft devices Preston, Daniel J.; Rothemund, Philipp; Jiang, Haihui Joy ...
Proceedings of the National Academy of Sciences - PNAS,
04/2019, Letnik:
116, Številka:
16
Journal Article
Recenzirano
Odprti dostop
Although soft devices (grippers, actuators, and elementary robots) are rapidly becoming an integral part of the broad field of robotics, autonomy for completely soft devices has only begun to be ...developed. Adaptation of conventional systems of control to soft devices requires hard valves and electronic controls. This paper describes completely soft pneumatic digital logic gates having a physical scale appropriate for use with current (macroscopic) soft actuators. Each digital logic gate utilizes a single bistable valve—the pneumatic equivalent of a Schmitt trigger—which relies on the snap-through instability of a hemispherical membrane to kink internal tubes and operates with binary high/low input and output pressures. Soft, pneumatic NOT, AND, and OR digital logic gates—which generate known pneumatic outputs as a function of one, or multiple, pneumatic inputs—allow fabrication of digital logic circuits for a set–reset latch, two-bit shift register, leading-edge detector, digital-to-analog converter (DAC), and toggle switch. The DAC and toggle switch, in turn, can control and power a soft actuator (demonstrated using a pneu-net gripper). These macroscale soft digital logic gates are scalable to high volumes of airflow, do not consume power at steady state, and can be reconfigured to achieve multiple functionalities from a single design (including configurations that receive inputs from the environment and from human users). This work represents a step toward a strategy to develop autonomous control—one not involving an electronic interface or hard components—for soft devices.
The difficulty in detecting rare infected cells immediately after mucosal HIV transmission has hindered our understanding of the initial cells targeted by the virus. Working with the macaque simian ...immunodeficiency virus (SIV) vaginal challenge model, we developed methodology to identify discrete foci of SIV (mac239) infection 48 hr after vaginal inoculation. We find infectious foci throughout the reproductive tract, from labia to ovary. Phenotyping infected cells reveals that SIV has a significant bias for infection of CCR6+ CD4+ T cells. SIV-infected cells expressed the transcriptional regulator RORγt, confirming that the initial target cells are specifically of the Th17 lineage. Furthermore, we detect host responses to infection, as evidenced by apoptosis, cell lysis, and phagocytosis of infected cells. Thus, our analysis identifies Th17-lineage CCR6+ CD4+ T cells as primary targets of SIV during vaginal transmission. This opens new opportunities for interventions to protect these cells and prevent HIV transmission.
Display omitted
•Methodology to identify SIV-infected foci 48 hr after vaginal exposure in macaques•Vaginal exposure with SIV causes infection throughout the female reproductive tract•SIV preferentially infects Th17 cells during the first 48 hr after challenge•Host-mediated antiviral measures are observed by day 2 after vaginal exposure
Understanding mucosal transmission of HIV is critical to design effective prevention strategies. Utilizing a rhesus macaque model of SIV infection, Stieh et al. identify CCR6+ RORγt+ Th17 cells throughout the female reproductive tract as being selectively targeted for infection early during transmission.
Omniphobic surfaces based on reentrant surface structures repel all liquids, regardless of the surface material, without requiring low-surface-energy coatings. Although omniphobic surfaces have been ...designed and demonstrated, they can fail during condensation, a phenomenon ubiquitous in both nature and industrial applications. Specifically, as condensate nucleates within the reentrant geometry, omniphobicity is destroyed. Here, we show a nanostructured surface that can repel liquids even during condensation. This surface consists of isolated reentrant cavities with a pitch on the order of 100 nm to prevent droplets from nucleating and spreading within all structures. We developed a model to guide surface design and subsequently fabricated and tested these surfaces with various liquids. We demonstrated repellency to 10 °C below the dew point and showed durability over 3 weeks. This work provides important insights for achieving robust, omniphobic surfaces.
Liquid–vapour phase change is a useful and efficient process to transfer energy in nature, as well as in numerous domestic and industrial applications. Relatively recent advances in altering surface ...chemistry, and in the formation of micro- and nanoscale features on surfaces, have led to exciting improvements in liquid–vapour phase-change performance and better understanding of the underlying science. In this Review, we present an overview of the surface, thermal and material science to illustrate how new materials and designs can improve boiling and condensation. There are many parallels between boiling and condensation, such as nucleation of a phase and its departure from a surface; however, the particular set of challenges associated with each phenomenon results in different material designs used in different manners. We also discuss alternative techniques, such as introducing heterogeneous surface chemistry or direct real-time manipulation of the phase-change process, which can offer further control of heat-transfer processes. Finally, long-term robustness is essential to ensure reliability and feasibility but remains a key challenge.Recent works in boiling and condensation have achieved unprecedented performance and revealed new mechanistic insights that will aid in material design. In this Review, we focus on nanoengineered materials, with emphasis on further improving the heat-transfer performance and long-term robustness.
Bacteria have a tendency to attach to surfaces and grow as structured communities called biofilms. Chronic biofilm infections are a problem because they tend to resist antibiotic treatment and are ...difficult to eradicate. Bacterial biofilms have an extracellular matrix that is usually composed of a mixture of polysaccharides, proteins, and nucleic acids. This matrix has long been assumed to play a passive structural and protective role for resident biofilm cells. Here we show that this view is an oversimplification and that the biofilm matrix can play an active role in stimulating its own synthesis. Working with the model biofilm bacterium Pseudomonas aeruginosa , we found that Psl, a major biofilm matrix polysaccharide for this species, acts as a signal to stimulate two diguanylate cyclases, SiaD and SadC, to produce the intracellular secondary messenger molecule c-di-GMP. Elevated intracellular concentrations of c-di-GMP then lead to the increased production of Psl and other components of the biofilm. This mechanism represents a unique positive feedback regulatory circuit, where the expression of an extracellular polysaccharide promotes biofilm growth in a manner analogous to autocrine signaling in eukaryotes.
When condensed droplets coalesce on a superhydrophobic nanostructured surface, the resulting droplet can jump due to the conversion of excess surface energy into kinetic energy. This phenomenon has ...been shown to enhance condensation heat transfer by up to 30% compared to state-of-the-art dropwise condensing surfaces. However, after the droplets jump away from the surface, the existence of the vapor flow toward the condensing surface increases the drag on the jumping droplets, which can lead to complete droplet reversal and return to the surface. This effect limits the possible heat transfer enhancement because larger droplets form upon droplet return to the surface, which impedes heat transfer until they can be either removed by jumping again or finally shedding via gravity. By characterizing individual droplet trajectories during condensation on superhydrophobic nanostructured copper oxide (CuO) surfaces, we show that this vapor flow entrainment dominates droplet motion for droplets smaller than R ≈ 30 μm at moderate heat fluxes (q″ > 2 W/cm2). Subsequently, we demonstrate electric-field-enhanced condensation, whereby an externally applied electric field prevents jumping droplet return. This concept leverages our recent insight that these droplets gain a net positive charge due to charge separation of the electric double layer at the hydrophobic coating. As a result, with scalable superhydrophobic CuO surfaces, we experimentally demonstrated a 50% higher overall condensation heat transfer coefficient compared to that on a jumping-droplet surface with no applied field for low supersaturations (<1.12). This work not only shows significant condensation heat transfer enhancement but also offers avenues for improving the performance of self-cleaning and anti-icing surfaces as well as thermal diodes.
Display omitted
•Effect of millimeter-sized geometric features on dropwise condensation was studied.•Heat transfer performance with/without air’s presence was experimentally examined.•The same ...geometric feature can show opposite effects on condensation heat transfer.•Numerical models were developed from the analysis of the thermal resistance network.
In this work, we investigated the effects of millimetric surface structures on dropwise condensation heat transfer under two different environments: pure vapor and an air-vapor mixture. Our experimental results show that, although convex structures enable faster droplet growth in an air-vapor mixture, the same structures impose the opposite effect during pure vapor condensation, hindering droplet growth. We developed a model for each case to predict the heat flux distribution along the structured surface, and the model shows reasonable agreement with experimental results. This work demonstrates that the effects of geometric features on dropwise condensation are not invariable but rather dependent on the scenario of resistances to heat and mass transfer in the system. The fundamental understanding developed in this study provides useful guidelines for condensation applications including power generation, desalination, dew harvesting, and thermal management.