Abstract
The ADIGE (Acceleratore Di Ioni a Grande carica Esotici) injector consists of an electrostatic 1+ beam line, equipped with ion sources able to produce a wide variety of beams, coupled to a ...magnetic beam line, where charge multiplication is accomplished by implementing an Electron Cyclotron Resonance (ECR) based charge breeder. The injector is totally integrated in the SPES (Selective Production of Exotic Species) beam line, to allow the post-acceleration of radioactive ions and is now in an advanced phase of installation. The electrostatic 1+beam line has been put into operation and is now producing beams from alkali metals. This contribution concerns the first results of the beam commissioning of this part of the injector, with the description of the initial debug phase and the solutions adopted to ensure a reliable and continuous operation. Preliminary results of the 1+ beam line characterization will be shown, with a comparison between simulated and measured emittances.
The Selective Production of Exotic Species (SPES) facility is under construction at INFN-LNL: aim of this project is the production, ionization and post-acceleration of radioactive ions to perform ...forefront research in nuclear physics. Radioactive species will be produced by fissions induced by a proton beam impinging on an UCx target: the proton beam will be delivered by a room temperature cyclotron (built by the Best Company) with a maximum energy of 40MeV and 0.25mA of maximum current. The radioactive species produced in the Target-Ion-Source system, extracted as a 1+ beam, cooled in a RFQ-cooler and purified from the isobars contaminants through a High Resolution Mass Spectrometer (HRMS). In order to allow post acceleration with the superconducting linac ALPI at INFN-LNL (up to 10MeV/A for A/q=7), an ECR-based charge breeding technique (ECR-CB) was chosen: in particular the SPES-CB was developed by the LPSC Grenoble on the basis of the Phoenix booster. The SPES-CB will be equipped with a complete test bench, totally integrated with the SPES beam line: in particular, in order to avoid beam contaminations induced by the impurities present inside the SPES-CB, and to have high transmission for a beam of very low intensity, special attention was paid not only to the transport efficiency but also to the resolution of the spectrometer downstream the charge breeder, with the design of a Medium Resolution Mass Spectrometer (MRMS). In the following paper the technical aspects connected with SPES-CB, its beam line and the transport of highly charged radioactive ions will be described.
The ADIGE (Acceleratore Di Ioni a Grande carica Esotici) injector of the SPES (Selective Production of Exotic Species) project is now in an advanced phase of installation. Its main components have ...been designed following particular needs of the project: first, an Electron Cyclotron Resonance (ECR)-based Charge Breeder (SPES-CB), to boost the charge states of the radioactive ions produced at SPES and allow their post-acceleration. Then, a stable 1+ source and a complete electrostatic beam line to characterize the SPES-CB. Finally, a unique Medium Resolution Mass Spectrometer (MRMS, R=1/1000), mounted on a high voltage platform downstream the SPES-CB, to clean the radioactive beam from the contaminants induced by the breeding stage. This contribution describes the status of the injector, in particular the installation of the platform housing the MRMS, the access and safety system adopted and the first beams to be extracted from the stable 1+ source.
Progress in the design and construction of SPES at INFN-LNL Bisoffi, G.; Prete, G.; Andrighetto, A. ...
Nuclear instruments & methods in physics research. Section B, Beam interactions with materials and atoms,
06/2016, Letnik:
376
Journal Article
Recenzirano
Odprti dostop
INFN-LNL is constructing an ISOL (Isotope Separation On Line) facility delivering neutron rich ion beams at 10AMeV or beyond, making use of the linear accelerator ALPI as the secondary accelerator. ...The facility includes a direct ISOL target based on UCx and able to reach 1013fissions/s. In parallel, an applied physics facility will be developed, with applications in medicine and neutron production. The SPES project is a national facility, approved and funded. Commissioning with the first exotic species is expected in 2019. The primary accelerator is a commercial cyclotron, which will send a 40MeV, 200μA proton beam onto an UCx target, connected to SIS, PIS and LIS ion sources. The extracted beam is purified through a Low Resolution Mass Separator (LMRS, i.e. a Wien filter and a dispersive dipole), a beam cooler and a High Resolution Mass Separator (HRMS) and sent to an ECR charge breeder to boost the exotic beam charge state. The highly charged exotic beam is further separated in a MRMS (Medium Resolution Mass Separator) and injected into a 100% duty cycle RFQ and into the existing superconducting linac ALPI, which will be refurbished and upgraded to be an efficient exotic beam accelerator. The upgrade of ALPI will give ∼10AMeV energy to 132Sn19+, taken as the reference ion beam. The paper presents the status of the design and construction of the SPES facility.
The ALPI linac at INFN-LNL was substantially refurbished in 2018, especially in view of its use as secondary accelerator for exotic species in the framework of the SPES project. In particular: 10 ...magnetic triplets were replaced with higher gradient ones; two cryomodules with quarter wave resonator were moved from the PIAVE injector to ALPI, so as to make them available both for exotic and stable beams; the cryogenic plant was renovated; the whole linac, its injector and its beam lines were eventually realigned via LASER tracking (LT). The expected outcome of the refurbishment project is a larger beam transmission (crucial for the efficient transport of the unavoidably low current exotic beams) and improved overall reliability so as to further extend the lifetime of an already 25 years old machine. The hardware commissioning of this new configuration will be reported.
Status of the SPES Exotic Beam Facility Comunian, M; Andrighetto, A; Antonini, P ...
Journal of physics. Conference series,
01/2020, Letnik:
1401, Številka:
1
Journal Article
Recenzirano
Odprti dostop
At Legnaro National Laboratories of INFN is under construction a Rare Isotope Facility called "Selective Production of Exotic Species" (SPES) based on a 35-70 MeV proton cyclotron, able to deliver ...two beams with a total current up to 0.75 mA, an ISOL fission target station and an existing ALPI superconducting accelerator as a post accelerator (up to 10 MeV/u for A/q=7). The paper will cover notably: the high-resolution mass separator, the CW RFQ (80 MHz, 727 keV/u, with internal bunching), the 1+ low energy transfer line and the injection line from Charge Breeder to ALPI under installation.
SPES (Selective Production of Exotic Species) is an ISOL type facility for production and post-acceleration of exotic nuclei for forefront research in nuclear physics. Radioactive (RA) species (A = ...80÷160) will be produced by fissions induced by a proton beam impinging on an UCx target: the proton beam will be delivered by a commercial cyclotron with a 40 MeV maximum energy and a 0.25 mA maximum current. The RA species, extracted from the Target-Ion-Source system as a 1+ beam, will be cooled in a RFQ (radiofrequency quadrupole) beam cooler (RFQ-BC) and purified from the isobars contaminants through a High Resolution Mass Separator (HRMS). Post-acceleration will be performed via an ECR-based charge breeder, delivering the obtained q+ RA beam to a being built CW RFQ and to the being upgraded superconducting (sc) linac ALPI (up to 10 MeV/A for a mass-to-charge ratio A/q = 7).
The SPES Radioactive Ion Beam (RIB) facility at INFN-LNL is in the construction phase. It is based on the ISOL method with an UCx Direct Target able to sustain a power of 10 kW. The primary proton ...beam is delivered by a high current Cyclotron accelerator, with energy 35-70 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions will be produced by proton induced Uranium fission in the UCx target at an expected fission rate in the order of 10 super(13) fissions per second. The exotic isotopes will be re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV and higher, for masses in the region A=130 amu at expected rate on the secondary target of 10 super(7) - 10 super(9) pps. The SPES project has the aim to provide high intensity and high-quality beams of neutron-rich nuclei as well as to develop an interdisciplinary research center based on the cyclotron proton beam.
A new Radioactive Ion Beam (RIB) facility (SPES) is presently under construction at the Legnaro National Laboratories of INFN. The SPES facility is based on the ISOL method using an UCx Direct Target ...able to sustain a power of 10 kW. The primary proton beam is provided by a high current Cyclotron accelerator with energy of 40 MeV and a beam current of 0.2-0.5 mA. Neutron-rich radioactive ions are produced by proton induced fission at an expected fission rate of the order of 1013 fissions per second. After ionization and selection the exotic isotopes are re-accelerated by the ALPI superconducting LINAC at energies of 10A MeV for masses in the region A=130 amu. The expected secondary beam rates are of the order of 107 – 109 pps. Aim of the SPES facility is to deliver high intensity radioactive ion beams of neutron rich nuclei for nuclear physics research as well as to be an interdisciplinary research center for radio-isotopes production for medicine and for neutron beams.
PDF
