The
Hayabusa2
mission journeys to C-type near-Earth asteroid (162173) Ryugu (1999 JU
3
) to observe and explore the 900 m-sized object, as well as return samples collected from the surface layer. The
...Haybusa2
spacecraft developed by Japan Aerospace Exploration Agency (JAXA) was successfully launched on December 3, 2014 by an H-IIA launch vehicle and performed an Earth swing-by on December 3, 2015 to set it on a course toward its target Ryugu.
Hayabusa2
aims at increasing our knowledge of the early history and transfer processes of the solar system through deciphering memories recorded on Ryugu, especially about the origin of water and organic materials transferred to the Earth’s region.
Hayabusa2
carries four remote-sensing instruments, a telescopic optical camera with seven colors (ONC-T), a laser altimeter (LIDAR), a near-infrared spectrometer covering the 3-μm absorption band (NIRS3), and a thermal infrared imager (TIR). It also has three small rovers of MINERVA-II and a small lander MASCOT (Mobile Asteroid Surface Scout) developed by German Aerospace Center (DLR) in cooperation with French space agency CNES. MASCOT has a wide angle imager (MasCam), a 6-band thermal radiator (MARA), a 3-axis magnetometer (MasMag), and a hyperspectral infrared microscope (MicrOmega). Further,
Hayabusa2
has a sampling device (SMP), and impact experiment devices which consist of a small carry-on impactor (SCI) and a deployable camera (DCAM3). The interdisciplinary research using the data from these onboard and lander’s instruments and the analyses of returned samples are the key to success of the mission.
On 5 April 2019, the Hayabusa 2 spacecraft performed the first successful artificial impact experiment on an asteroid. The Small Carry-on Impactor (SCI) device was deployed at an altitude of 500 m ...above Ryugu’s surface. The 2 kg copper projectile hit Ryugu’s surface in 40 min and caused the formation of an artificial crater 14.5 m in diameter. Once the SCI was deployed, the Hayabusa 2 spacecraft performed a two-week escape trajectory reaching altitudes as far as 120 km from Ryugu. The spacecraft then returned to its nominal position at 20 km altitude (Home-Position) from Ryugu for hovering control. This was done to prevent ejecta particles from seriously damaging the spacecraft and compromising its functionality. In this article, we present a method to forecast the daily probability of spacecraft damage along the selected nominal escape trajectory due to the debris cloud formed by an artificial impact. The result of the damage analysis confirmed that the selected escape trajectory experienced a small number of particle collisions under the design threshold, which would not have resulted in damage. Indeed, no damage was reported on the Hayabusa 2 spacecraft and it kept operating normally after the SCI operation. The method here presented serves as a guideline for post-impact mission operations to forecast and estimate the probability of damage to spacecraft or CubeSats operating near a small celestial body after an artificial impact experiment has occurred.
TIR, the thermal infrared imager on Hayabusa2, acquired high-resolution thermal images of the asteroid 162173 Ryugu for one asteroid rotation period on August 1, 2018 to investigate the ...thermophysical properties of the asteroid. The surface temperatures of Ryugu suggest that the surface has a low thermal inertia, indicating the presence of porous materials. Thermophysical models that neglect or oversimplify surface roughness cannot reproduce the flat diurnal temperature profiles observed during daytime. We performed numerical simulations of a thermophysical model, including the effects of roughness on the diurnal brightness temperature, the predictions of which successfully reproduced the observed diurnal variation of temperature. The global thermal inertia was obtained with a standard deviation of 225 ± 45 J m−2 s−0.5 K−1, which is relatively low but still within the range of the value estimated in our previous study (Okada et al., Nature 579, 518–522, 2020), confirming that the boulders on Ryugu are more porous in nature than typical carbonaceous chondrites. The global surface roughness (the ratio of the variance of the height relative to a local horizontal surface length) was determined as 0.41 ± 0.08, corresponding to a RMS surface slope of 47 ± 5°. We identified a slightly lower roughness distributed along the equatorial ridge, implying a mass movement of boulders from the equatorial ridge to the mid-latitudes.
•Thermophysical model using a shape model of rough surface reproduces observations.•We obtain a global thermal inertia of 225 ± 45 J m−2 s−0.5 K−1.•We obtain a global RMS surface slope of 47 ± 5°.•We confirm Ryugu's low global thermal inertia owing to porous constituent boulders.
The pristine sample from the near-Earth carbonaceous asteroid (162173) Ryugu collected by the Hayabusa2 spacecraft enabled us to analyze the pristine extraterrestrial material without uncontrolled ...exposure to the Earth's atmosphere and biosphere. The initial analysis team for the soluble organic matter reported the detection of wide variety of organic molecules including racemic amino acids in the Ryugu samples. Here we report the detection of uracil, one of the four nucleobases in ribonucleic acid, in aqueous extracts from Ryugu samples. In addition, nicotinic acid (niacin, a B
vitamer), its derivatives, and imidazoles were detected in search for nitrogen heterocyclic molecules. The observed difference in the concentration of uracil between A0106 and C0107 may be related to the possible differences in the degree of alteration induced by energetic particles such as ultraviolet photons and cosmic rays. The present study strongly suggests that such molecules of prebiotic interest commonly formed in carbonaceous asteroids including Ryugu and were delivered to the early Earth.
All life on Earth contains amino acids and carbonaceous chondrite meteorites have been suggested as their source at the origin of life on Earth. While many meteoritic amino acids are considered ...indigenous, deciphering the extent of terrestrial contamination remains an issue. The Ryugu asteroid fragments (JAXA Hayabusa2 mission), represent the most uncontaminated primitive extraterrestrial material available. Here, the concentrations of amino acids from two particles from different touchdown sites (TD1 and TD2) are reported. The concentrations show that N,N-dimethylglycine (DMG) is the most abundant amino acid in the TD1 particle, but below detection limit in the other. The TD1 particle mineral components indicate it experienced more aqueous alteration. Furthermore, the relationships between the amino acids and the geochemistry suggest that DMG formed on the Ryugu progenitor body during aqueous alteration. The findings highlight the importance of aqueous chemistry for defining the ultimate concentrations of amino acids in primitive extraterrestrial samples.
Ryugu is a carbonaceous rubble-pile asteroid visited by the Hayabusa2 spacecraft. Small rubble pile asteroids record the thermal evolution of their much larger parent bodies. However, recent space ...weathering and/or solar heating create ambiguities between the uppermost layer observable by remote-sensing and the pristine material from the parent body. Hayabusa2 remote-sensing observations find that on the asteroid (162173) Ryugu both north and south pole regions preserve the material least processed by space weathering, which is spectrally blue carbonaceous chondritic material with a 0-3% deep 0.7-µm band absorption, indicative of Fe-bearing phyllosilicates. Here we report that spectrally blue Ryugu's parent body experienced intensive aqueous alteration and subsequent thermal metamorphism at 570-670 K (300-400 °C), suggesting that Ryugu's parent body was heated by radioactive decay of short-lived radionuclides possibly because of its early formation 2-2.5 Ma. The samples being brought to Earth by Hayabusa2 will give us our first insights into this epoch in solar system history.
The resurfacing process on Ryugu accompanying the artificial impact crater formation by Hayabusa2's Small Carry-on Impactor (SCI) was studied by comparing pre- and post-impact images of this region ...captured by an optical navigation camera. Three different aspects of the resurfacing process were examined: the crater rim profiles, the motion of boulders and the appearance of new boulders, and the motion vectors of Ryugu's surface around the SCI crater. The averaged crater rim height, h, was derived as follows: h = hr exp −(r/Rrim − 1)/λrim, where Rrim is the SCI crater rim radius of 8.8 m, the fitted parameter, hr, is 0.475 m, and the λrim is 0.245. The ejecta blanket thickness of the SCI crater was thinner than that estimated from both the observation of natural craters and the crater formation theory. However, this discrepancy of the ejecta blanket thickness was resolved by taking into account the new boulders appearing in the post-impact images in the volume. The motion of the discovered boulders could be classified by its mechanisms as follows: a dragging motion created by excavation flow during the crater formation, a pushing motion created by falling-back ejecta, a dragging motion created by the slight motion of the Okamoto boulder, and a motion caused by seismic shaking induced by the SCI impact itself. The seismic shaking caused boulders to move farther than 3 cm from the original site in most of the region within 15 m distance from the SCI crater center, where the maximum acceleration of the impact induced seismic waves 7 times larger than the surface gravity of Ryugu based on the laboratory experiments (Matsue et al. 2020 Icarus, 338, 113520), and the evidence of the seismic shaking for boulders with a movement of >3 cm was detected in about 10% of the boulders in the region between 15 m and 30 m from the crater center, which region was inferred to experience acceleration larger than the Ryugu's surface gravity based on previous laboratory experiments (Matsue et al. 2020 Icarus, 338, 113520).
•We studied resurfacing processes caused by the artificial impact on asteroid Ryugu.•Pre- and post-impact images enabled us to determine the disturbed area.•The impactor disturbed the surface within a 40 m radius from the crater center.•The ejecta blanket thickness was approximated by the exponential equation.•More than 50% of boulders within a 15 m radius was moved by seismic shaking.
Chondrule-like objects and Ca-Al-rich inclusions (CAIs) are discovered in the retuned samples from asteroid Ryugu. Here we report results of oxygen isotope, mineralogical, and compositional analysis ...of the chondrule-like objects and CAIs. Three chondrule-like objects dominated by Mg-rich olivine are
O-rich and -poor with Δ
O (=δ
O - 0.52 × δ
O) values of ~ -23‰ and ~ -3‰, resembling what has been proposed as early generations of chondrules. The
O-rich objects are likely to be melted amoeboid olivine aggregates that escaped from incorporation into
O-poor chondrule precursor dust. Two CAIs composed of refractory minerals are
O-rich with Δ
O of ~ -23‰ and possibly as old as the oldest CAIs. The discovered objects (<30 µm) are as small as those from comets, suggesting radial transport favoring smaller objects from the inner solar nebula to the formation location of the Ryugu original parent body, which is farther from the Sun and scarce in chondrules. The transported objects may have been mostly destroyed during aqueous alteration in the Ryugu parent body.
Abstract The analysis of samples returned from the C-type asteroid Ryugu has drastically advanced our knowledge of the evolution of early solar system materials. However, no consensus has been ...obtained on the chronological data, which is important for understanding the evolution of the asteroid Ryugu. Here, the aqueous alteration age of Ryugu particles was determined by the Mn–Cr method using bulk samples, yielding an age of 4.13 + 0.62/−0.55 Myr after the formation of Ca–Al-rich inclusions (CAI). The age corresponds to 4563.17 + 0.60/−0.67 Myr ago. The higher 55 Mn/ 52 Cr, ε 54 Cr, and initial ε 53 Cr values of the Ryugu samples relative to any carbonaceous chondrite samples implies that its progenitor body formed from the least thermally processed precursors in the outermost region of the protoplanetary disk. Despite accreting at different distances from the Sun, the hydrous asteroids (Ryugu and the parent bodies of CI, CM, CR, and ungrouped C2 meteorites) underwent aqueous alteration during a period of limited duration (3.8 ± 1.8 Myr after CAI). These ages are identical to the crystallization age of the carbonaceous achondirtes NWA 6704/6693 within the error. The ε 54 Cr and initial ε 53 Cr values of Ryugu and NWA 6704/6693 are also identical, while they show distinct Δ' 17 O values. This suggests that the precursors that formed the progenitor bodies of Ryugu and NWA 6703/6693 were formed in close proximity and experienced a similar degree of thermal processing in the protosolar nebula. However, the progenitor body of Ryugu was formed by a higher ice/dust ratio, than NWA6703/6693, in the outer region of the protoplanetary disk.
The precise orbit of the Hayabusa2 spacecraft with respect to asteroid Ryugu is dynamically determined using the data sets collected by the spacecraft’s onboard laser altimeter (LIght Detection And ...Ranging, LIDAR) and automated image tracking (AIT). The LIDAR range data and the AIT angular data play complementary roles because LIDAR is sensitive to the line-of-sight direction from Hayabusa2 to Ryugu, while the AIT is sensitive to the directions perpendicular to it. Using LIDAR and AIT, all six components of the initial state vector can be derived stably, which is difficult to achieve using only LIDAR or AIT. The coefficient of solar radiation pressure (SRP) of the Hayabusa2 spacecraft and standard gravitational parameter (
GM
) of Ryugu can also be estimated in the orbit determination process, by combining multiple orbit arcs at various altitudes. In the process of orbit determination, the Ryugu-fixed coordinate of the center of the LIDAR spot is determined by fitting the range data geometrically to the topography of Ryugu using the Markov Chain Monte Carlo method. Such an approach is effective for realizing the rapid convergence of the solution. The root mean squares of the residuals of the observed minus computed values of the range and brightness-centroid direction of the image are 1.36 m and 0.0270°, respectively. The estimated values of the GM of Ryugu and a correction factor to our initial SRP model are 29.8 ± 0.3 m
3
/s
2
and 1.13 ± 0.16, respectively.