•Samples tested in Al die soldering tests showed similar behavior to industrial die molds.•Al corrosion tests present more pronounced corrosion than real molds and dies.•AlCrN PVD coating reduces the ...Al reaction and extraction stresses of H13 tool steel.•Dissolution of the H13 at stress concentration regions make the surface prone to fatigue failure.
High-pressure die casting (HPDC) is regularly used to produce aluminum components. The die-casting molds are subjected to severe localized corrosion due to contact with the hot melted aluminum (700 °C) and accelerated by the intense thermal cycling generated by the cooling system. The correct understanding of each failure mode that occurs during the operation of these molds can increase tool life and reduce operational costs. Different components used in aluminum components production were evaluated after completing their useful tool life, and the failure modes were compared with two high-temperature laboratory tests, molten aluminum corrosion and die soldering tests. The primary crack mechanism observed in the HPDC die was heat checking, with a surface reaction of the tool steel with the molten aluminum. PVD coating increases the die's tool life, reducing the reactivity with the molten aluminum, which was observed in both laboratory tests. Die soldering tests represent the die mold behavior in HPDC production, showing a similar intermetallic phase and crack formation. Laboratory corrosion tests showed a more aggressive corrosion behavior than that observed in molds and dies used in HPDC industrial production.
OBJETIVOS: O presente trabalho visou avaliar os efeitos do consumo dos óleos de amendoim, açafrão e oliva no perfil lipídico, composição corporal, metabolismo energético e ingestão alimentar em ...indivíduos eutróficos normolipidêmicos. MÉTODOS: Foram selecionados 32 indivíduos, divididos aleatoriamente em quatro grupos, tendo quatro mulheres e quatro homens em cada grupo, com idade entre 18 e 50 anos. Foi oferecido um milk shake aos voluntários no desjejum, veiculando uma quantidade equivalente a 30% da sua energia basal na forma de óleo (amendoim, açafrão ou oliva), por um período de oito semanas, exceto para o grupo-controle, que não recebeu o shake. Foram realizadas avaliações dos valores de colesterol total e frações, triacilgliceróis, composição corporal, taxa de metabolismo basal, termogênese induzida pela dieta e ingestão alimentar dos indivíduos nas semanas basal, 4ª e 8ª. RESULTADOS: Não foi observada diferença significante no perfil lipídico e na saciedade, no entanto, o grupo que recebeu óleo de açafrão apresentou valores de lipídios plasmáticos mais reduzidos. A ingestão dos óleos levou ao aumento do ganho de peso, sendo que o óleo de oliva proporcionou maior circunferência do quadril. CONCLUSÃO: A adição dos óleos na dieta levou ao aumento da deposição de gordura corporal sem provocar alterações no perfil lipídico e ingestão dietética, ao contrário do relatado na literatura. O uso dos óleos em substituição a outros nutrientes energéticos da dieta, o maior número de voluntários e um período maior de intervenção devem ser investigados em estudos futuros.
OBJECTIVE: The present study aimed at evaluating the effects of peanut, safflower and olive oils on the lipid profile, body composition and satiety of eutrophic, normolipidemic subjects. METHODS: Thirty-two 18 to 50 year-old subjects were recruited and randomly divided into four groups, each with 4 men and 4 women. One group received no treatment and the others received a milk shake for their breakfast, containing an amount of one of the oils (peanut, safflower or olive) equivalent to 30% of their basal energy metabolism, for a period of 8 weeks. The levels of total blood cholesterol and fractions, triacylglycerols, body weight, body composition, basal metabolic rate, dietary induced thermogenesis, satiety and food intake were evaluated on the basal, 4th and 8th weeks. RESULTS: No significant difference was observed in the lipid profile or satiety, but the safflower oil group showed lower levels of blood lipids. Oil intake, irrespective of its composition, led to an increase in body weight, and olive oil consumption increased the hip circumference. CONCLUSION: Contrary to reports in the literature, the addition of oils to the diet increased body fat deposition, and had no effect on blood lipid profile or satiety. The use of oil to substitute other energetic nutrients of the diet should be investigated in future studies, with a larger number of volunteers and a longer period of intervention.
O processo de injeção sob pressão de ligas de alumínio é empregado para a produção de peças diversas, destinadas principalmente à indústria automobilística. Dentre as principais vantagens deste ...processo, destaca-se a possibilidade de produção de peças complexas, com seções delgadas, e a alta velocidade de produção. Apesar desses pontos positivos, o reduzido tempo de ciclo e as elevadas temperaturas (~ 700°C) envolvidas promovem danos por fadiga térmica na superfície de trabalho das matrizes. Após milhares de peças produzidas, surgem trincas em regiões críticas, que crescem com o aumento da produção até atingirem condições que inviabilizam o uso da matriz, levando ao seu fim de vida. Na última década, novos aços de alta tenacidade e melhor resistência a quente, bem como tratamentos termoquímicos como a nitretação sob plasma vêm sendo aplicados em tais matrizes, retardando significativamente o fim de vida. Neste contexto, o presente trabalho visou estudar o fim de vida de matrizes de fundição sob pressão, relacionando-o aos aspectos microestruturais da superfície nitretada, tensões residuais inseridas durante processo de nitretação e as condições do processo de fundição. Para o estudo, os aços AISI H13, AISI H11 com redução do teor de Si e AISI H10 modificado, foram temperados e revenidos para dureza na faixa de 44 a 46 HRC e posteriormente nitretados sob plasma em diversas condições de temperatura, tempo e composição da atmosfera gasosa. Foram feitos ensaios de medições de tensões residuais, perfis de dureza, metalografia e difração de Raios-X. Para o estudo de fadiga térmica, foi utilizado o software DEFORM 3DTM para simular os danos ocasionados pelos mecanismos de fadiga térmica nas superfícies das matrizes com a presença e ausência de camada nitretada. Os resultados obtidos mostraram que a variação dos parâmetros de nitretação, tais como: tempo, temperatura e percentual de nitrogênio, afetam o perfil de dureza e de tensões residuais presentes na camada nitretada, bem como os microconstituintes da camada nitretada. Também foi verificado que a variação dos teores de elementos de liga de aços ferramenta para trabalho a quente em relação ao H13, mudam o perfil de dureza e de tensões residuais de compressão das camadas nitretadas. O material nitretado, após ser submetido em temperatura elevada, apresenta redução no nível de tensões residuais de compressão, ocorrendo processo de alívio de tensões. O mesmo efeito não é tão fortemente verificado no perfil de dureza do material. Deste modo, foi possível verificar que nos primeiros ciclos de injeção de alumínio, os mecanismos responsáveis por retardar a nucleação das trincas térmicas são a presença de tensões residuais de compressão na superfície do material e maior dureza local, dada pela maior dureza a quente existente no perfil de dureza da camada nitretada. Para estágios mais avançados de ciclagem térmica, apenas a maior dureza local será responsável por retardar a nucleação das trincas térmicas. A simulação demonstrou que o dano gerado durante processo de fadiga térmica é mais intenso no processo em que a matriz permanece exposta por tempos mais longos em elevadas temperaturas. O conhecimento destas características pode auxiliar a retardar o dano na superfície da matriz, via alterações do processo de fundição, ou das características dos aços ferramenta, dada pela tenacidade e resistência a quente da liga empregada na matriz, ou dos tratamentos térmicos e ou dos tratamentos de superfície, como a nitretação sob plasma, aplicados às matrizes.
The process of pressured injection of aluminum alloys is made use of in the production of sundry parts, meant mainly for the automotive industry. Among the main advantages of such process there stands out the possibility of production of complex parts, with thin sections, and at a high output speed. Despite these positive points, the reduced cycle time and high temperatures (~ 700°C) involved cause damage due to the thermal fatigue on the working surface of dies. After a great number of parts made there appear cracks in these areas that grow with the production increase up to reaching conditions that make the use of the die no longer viable, thus leading to its death. In the last decade, new unyielding, better heat resistant steels, as well as thermochemical treatments like plasma nitriding, have been applied to such dies, significantly hindering their death. In this context, the present paper has aimed at studying the death of pressured die casting by relating it to the microstructural aspects of the surface, residual tensions inserted during the nitriding process and the die casting conditions. For the study, AISI H13, AISI H11 with Si content reduction, and DIN WNr. 1.2367 steels were quenched and tempered to hardness in the range of 44 to 46 HRC and later subjected to plasma nitriding in different conditions of temperature, time, and gas atmosphere composition. Measurement tests of residual tensions, hardness profiles, metallography, and X-Ray diffraction have been carried out. For the thermal fatigue study, the software DEFORM 3D has been used to simulate damages caused by the thermal fatigue on the surface of dies in the presence or absence of surface nitriding. Results obtained have shown that the variation of nitriding parameters, such as time, temperature, and nitrogen percent, affect the hardness and residual tension profiles present in the surface nitriding, as well as in its microcomponents. It has also been ascertained that the variation of content of elements of steel tool alloys for heat work in relation to H13 one changes the profile of hardness and residual tensions of compression of nitriding treated surface. The resulting material, after being subjected to high temperature, presents a reduction of level in the residual tensions of compression, bringing about a process of tensions relief. The same effect is not so strongly verified in the material hardness profile. Accordingly, it has been possible to ascertain that in the first cycles of aluminum injection, the mechanisms responsible for slowing down the nucleation of thermal cracks are the presence of residual compression tensions on the material surface and higher spot hardness, given the higher heated hardness existing in the hardness profile of nitriding treated surface. For more advanced thermal cycling stages just the higher spot hardness will account for hindering the nucleation of thermal cracks. The simulation has demonstrated that the thermal fatigue process is more intense in process in which the die is exposed to high temperature for a longer time. The knowledge of these characteristics may help hinder the die surface damage through modifications in the casting process, or in the characteristics of tool steel (given the toughness and heat resistance of the alloy used in the die), or in the thermal treatments, or in the surface treatments, like plasma nitriding applied to dies.
Hot work tool steels are mainly used as dies for hot forming processes. New grades have been recently developed, with lower silicon content, leading to a substantial performance increase. The present ...paper describes the mechanical properties and microstructural characterization of such hot work steels, as well as case studies. Hardness and toughness were determined for a wide range of tempering temperatures; concerning microstructural characterization, transmission electron microcopy was used for observing secondary carbides - the main responsible for the hot strength of these steels. Important differences were observed on the secondary carbides, which are considered responsible for the differences on the mechanical properties. The reduction in silicon content reduces the amount of fine needle shaped carbides; this can explain the lower toughness of high silicon content grades and a possible mechanism is proposed. Therefore, the microstructural and mechanical results enable the understanding of the higher performance of this new class of hot work tool steels, with lower silicon content.
The unique properties of metal-organic frameworks (MOFs) such as their large surface area and high porosity have attracted considerable attention in recent decades. The MOFs are a promising class of ...materials for developing highly efficient biosensors due to these same properties. This bibliometric analysis focused on the use of MOFs as enzyme-coupled materials in biosensor construction and aimed to provide a comprehensive overview of the research field by analyzing a collected database. The analysis included identifying the countries that have published the most, the most prominent applications, and trends for future directions in the field. The study used three databases with different numbers of documents, differentiated by research areas, with refinements made to the search as needed. The results suggest that MOF-derived biosensors are a growing field, with the Republic of China emerging as a significant contributor to research in this area. The study also used computational processing of trend analysis and geocoding to reveal these findings.
Novel species of fungi described in this study include those from various countries as follows: Antarctica, Cladosporium arenosum from marine sediment sand. Argentina, Kosmimatamyces alatophylus ...(incl. Kosmimatamyces gen. nov.) from soil. Australia,
Aspergillus banksianus, Aspergillus kumbius, Aspergillus luteorubrus, Aspergillus malvicolor and Aspergillus nanangensis from soil, Erysiphe medicaginis from leaves of Medicago polymorpha, Hymenotorrendiella communis on leaf litter of Eucalyptus
bicostata, Lactifluus albopicri and Lactifluus austropiperatus on soil, Macalpinomyces collinsiae on Eriachne benthamii, Marasmius vagus on soil, Microdochium dawsoniorum from leaves of Sporobolus natalensis, Neopestalotiopsis nebuloides
from leaves of Sporobolus elongatus, Pestalotiopsis etonensis from leaves of Sporobolus jacquemontii, Phytophthora personensis from soil associated with dying Grevillea mccutcheonii. Brazil, Aspergillus oxumiae from soil, Calvatia
baixaverdensis on soil, Geastrum calycicoriaceum on leaf litter, Greeneria kielmeyerae on leaf spots of Kielmeyera coriacea. Chile, Phytophthora aysenensis on collar rot and stem of Aristotelia chilensis. Croatia, Mollisia gibbospora
on fallen branch of Fagus sylvatica. Czech Republic, Neosetophoma hnaniceana from Buxus sempervirens. Ecuador, Exophiala frigidotolerans from soil. Estonia, Elaphomyces bucholtzii in soil. France, Venturia paralias
from leaves of Euphorbia paralias. India, Cortinarius balteatoindicus and Cortinarius ulkhagarhiensis on leaf litter. Indonesia, Hymenotorrendiella indonesiana on Eucalyptus urophylla leaf litter. Italy, Penicillium taurinense
from indoor chestnut mill. Malaysia, Hemileucoglossum kelabitense on soil, Satchmopsis pini on dead needles of Pinus tecunumanii. Poland, Lecanicillium praecognitum on insects' frass. Portugal, Neodevriesia aestuarina from saline
water. Republic of Korea, Gongronella namwonensis from freshwater. Russia, Candida pellucida from Exomias pellucidus, Heterocephalacria septentrionalis as endophyte from Cladonia rangiferina, Vishniacozyma phoenicis from dates fruit,
Volvariella paludosa from swamp. Slovenia, Mallocybe crassivelata on soil. South Africa, Beltraniella podocarpi, Hamatocanthoscypha podocarpi, Coleophoma podocarpi and Nothoseiridium podocarpi (incl. Nothoseiridium gen. nov.)from
leaves of Podocarpus latifolius, Gyrothrix encephalarti from leaves of Encephalartos sp., Paraphyton cutaneum from skin of human patient, Phacidiella alsophilae from leaves of Alsophila capensis, and Satchmopsis metrosideri on leaf litter of
Metrosideros excelsa. Spain, Cladophialophora cabanerensis from soil, Cortinarius paezii on soil, Cylindrium magnoliae from leaves of Magnolia grandiflora, Trichophoma cylindrospora (incl. Trichophoma gen. nov.) from plant debris, Tuber
alcaracense in calcareus soil, Tuber buendiae in calcareus soil. Thailand, Annulohypoxylon spougei on corticated wood, Poaceascoma filiforme from leaves of unknown Poaceae. UK, Dendrostoma luteum on branch lesions of Castanea
sativa, Ypsilina buttingtonensis from heartwood of Quercus sp. Ukraine, Myrmecridium phragmiticola from leaves of Phragmites australis. USA, Absidia pararepens from air, Juncomyces californiensis (incl. Juncomyces
gen. nov.) from leaves of Juncus effusus, Montagnula cylindrospora from a human skin sample, Muriphila oklahomaensis (incl. Muriphila gen. nov.)on outside wall of alcohol distillery, Neofabraea eucalyptorum from leaves of Eucalyptus macrandra,
Diabolocovidia claustri (incl. Diabolocovidia gen. nov.)from leaves of Serenoa repens, Paecilomyces penicilliformis from air, Pseudopezicula betulae from leaves of leaf spots of Populus tremuloides. Vietnam, Diaporthe durionigena on branches
of Durio zibethinus and Roridomyces pseudoirritans on rotten wood. Morphological and culture characteristics are supported by DNA barcodes.
This work proposed the synthesis and the characterization of Restricted Access Magnetic Nanotubes (M-RACNTs) to be used as sorbent in the magnetic dispersive solid-phase extraction (MDSPE) of organic ...compounds from the fermentation broth of the endophyte Lasiodiplodia sp. Synthesis was performed by functionalizing commercial multiple-walled carbon nanotubes with magnetic nanoparticles (M-CNTs) and by coating the M-CNTs with a layer of bovine serum albumin. The materials were characterized by infrared spectroscopy with Fourier Transform, thermogravimetry, zeta potential, and scanning electron microscopy. Different crude extracts were obtained, depending on the sample pH and the elution solvent tested. Chloroform and ethyl acetate extracts showed activity against a Gram-positive pathogen (Staphylococcus aureus). The crude extract's constitution was investigated. By GC/MS analysis were found hydrocarbons, aldehydes, alcohols, among others, while by LC-MS/MS analysis were found flavonoids, macrocyclic lactones, oleic acids, jasmonic acid derivatives and amino acids. A multivariate optimization, through fractional factorial planning, for four independent variables, was performed for a hydrocarbon (hexadecane) and one possible jasmonic acid derivative, both with antimicrobial activity related in the literature. The results showed that it was possible to obtain crude extracts with high concentrations of these analytes in a single extraction procedure. The increase in the analytical signal was 3.7 times for hexadecane and 1.4 times for the possible jasmonic acid derivative. The M-RACNTs also demonstrated their ability to prevent the adsorption of macromolecules, such as lysozyme, which was confirmed through SDS-PAGE analysis.
Display omitted
Display omitted
•Advanced bibliometric analysis of ionic liquids in lipase-catalyzed reactions literature.•China, USA, Spain, France lead in IL-lipase use.•The software VOSViewer, CiteSpace, ArcMap, ...Excel and Google Sheets were used for analysis.•Analysis of the most used ionic liquids in recent years and their applications.•Ionic liquids and enzymes replace harmful chemicals with eco-friendly methods.
Ionic liquids (ILs) are widely used in many applications. Still, their use in enzyme engineering is particularly notable due to their environmentally friendly nature and efficient replacement of conventional organic solvents. Recently, lipase has emerged as an environmentally friendly catalyst. Nevertheless, using Lipases in the presence of ILs has led to a remarkable activity enhancement, making it a sustainable and non-harmful approach. This study conducted a bibliometric review of research articles published between 2010 and 2022 concerning the use of ILs in lipase-catalyzed reactions. The analysis was based on 206 publications retrieved from the Web of Science Core Collection (WoS) database., which were analyzed using different software tools, such as VOSviewer, CiteSpace, and ArcGIS. Key findings included that over half of the publications originated from other countries, notably China (around 36.4%), the United States, Spain, and France. As a result of this bibliometric analysis, four emerging trends were identified: namely: i) lipase-catalyzed synthesis, ii) the use of deep eutectic solvent, iii) the application of ILs in secondary alcohol reactions, iv) the use of ILs as green solvents, and iv) the enzymatic ring-opening polymerization. The study also evaluated the most prominent authors, articles, and institutions that provide comprehensive data on up-to-date research on ILs and lipases. It is noted that the studies identify significant advantages in this field, showing a positive trend of promising results, especially with the development of improved and environmentally friendly processes.
PDF
