Poly(N-isopropylmethacrylamide) (PNIPMAM) is a thermoresponsive polymer, exhibiting lower critical solution temperature (LCST) behavior in an aqueous solution. We investigate the ...temperature-dependent phase behavior of PNIPMAM solutions in D2O using turbidimetry, differential scanning calorimetry (DSC), small-angle and very small angle neutron scattering (SANS and VSANS), and Raman spectroscopy, covering a large concentration range, and compare the results from PNIPMAM with the findings from its analogue poly(N-isopropylacrylamide) (PNIPAM). We find that the PNIPMAM chains only dehydrate 2–3 °C above the macroscopic cloud point temperature, T CP. Even in the one-phase state, loosely packed, large-scale inhomogeneities and physical cross-links are observed, and the chain conformation of PNIPMAM is more compact than the one of PNIPAM. This is attributed to the attractive intermolecular interactions between the hydrophobic moieties. The phase transition of PNIPMAM is broader than the one of PNIPAM. Upon heating to the two-phase state, the PNIPMAM chains collapse and form mesoglobules. These are larger and more hydrated than those for PNIPAM. This is attributed to the steric hindrance caused by the additional methyl groups, which weaken the intrapolymer interactions in the two-phase state. Thus, the methyl groups in the backbone of the PNIPMAM chains have a significant impact on the hydration and the structural behavior around the phase transition.
Several series of presumed dual thermo-responsive diblock copolymers consisting of one non-ionic and one zwitterionic block were synthesized via consecutive reversible addition-fragmentation chain ...transfer (RAFT) polymerization. For all copolymers, poly(N-isopropylmethacrylamide) was chosen as non-ionic block that shows a coil-to-globule collapse transition of the lower critical solution temperature (LCST) type. In contrast, the chemical structure of zwitterionic blocks, which all belonged to the class of poly(sulfobetaine methacrylate)s, was varied broadly, in order to tune their coil-to-globule collapse transition of the upper critical solution temperature (UCST) type. All polymers were labeled with a solvatochromic fluorescent end-group. The dual thermo-responsive behavior and the resulting multifarious temperature-dependent self-assembly in aqueous solution were mapped by temperature-resolved turbidimetry, 1H NMR spectroscopy, dynamic light scattering (DLS), and fluorescence spectroscopy. Depending on the relative positions between the UCST-type and LCST-type transition temperatures, as well as on the width of the window in-between, all the four possible modes of stimulus-induced micellization can be realized. This includes classical induced micellization due to a transition from a double hydrophilic, or respectively, from a double hydrophobic to an amphiphilic state, as well as “schizophrenic” behavior, where the core- and shell-forming blocks are inverted. The exchange of the roles of the hydrophilic and hydrophobic block in the amphiphilic states is possible through a homogeneous intermediate state or a heterogeneous one.
Display omitted
•Well-defined zwitterionic block copolymers are made by RAFT polymerization.•The copolymers show dual thermo-responsive behavior in aqueous solution.•The individual polymer blocks show separate UCST and LCST-transitions.•Temperature dependent 1H NMR, dynamical light scattering and fluorescence studies.•Schizophrenic micellization behavior by inversion of core- and shell-forming blocks.
Nonionic-zwitterionic diblock copolymers are designed to feature a coil-to-globule collapse transition with an upper critical solution temperature (UCST) in aqueous media, including physiological ...saline solution. The block copolymers that combine presumably highly biocompatible blocks are synthesized by chain extension of a poly(ethylene glycol) (PEG) macroinitiator via atom transfer radical polymerization (ATRP) of sulfobetaine and sulfabetaine methacrylates. Their thermoresponsive behavior is studied by variable temperature turbidimetry and ¹H NMR spectroscopy. While the polymers with polysulfobetaine blocks exhibit phase transitions in the physiologically interesting window of 30⁻50 °C only in pure aqueous solution, the polymers bearing polysulfabetaine blocks enabled phase transitions only in physiological saline solution. By copolymerizing a pair of structurally closely related sulfo- and sulfabetaine monomers, thermoresponsive behavior can be implemented in aqueous solutions of both low and high salinity. Surprisingly, the presence of the PEG blocks can affect the UCST-transitions of the polyzwitterions notably. In specific cases, this results in "schizophrenic" thermoresponsive behavior displaying simultaneously an UCST and an LCST (lower critical solution temperature) transition. Exploratory experiments on the UCST-transition triggered the encapsulation and release of various solvatochromic fluorescent dyes as model "cargos" failed, apparently due to the poor affinity even of charged organic compounds to the collapsed state of the polyzwitterions.
The aqueous self‐assembly behavior of a series of poly(ethylene glycol)‐poly(l‐/d‐lactide) block copolymers and corresponding stereocomplexes is examined by differential scanning calorimetry, dynamic ...light scattering, and transmission electron microscopy. Block copolymers assemble into spherical micelles and worm‐like aggregates at room temperature, whereby the fraction of the latter seemingly increases with decreasing lactide weight fraction or hydrophobicity. The formation of the worm‐like aggregates arises from the crystallization of the polylactide by which the spherical micelles become colloidally unstable and fuse epitaxically with other micelles. The self‐assembly behavior of the stereocomplex aggregates is found to be different from that of the block copolymers, resulting in rather irregular‐shaped clusters of spherical micelles and pearl‐necklace‐like structures.
Poly(ethylene glycol)‐poly(l‐lactide) block copolymers assemble into spherical micelles and worm‐like aggregates in water, whereby the fraction of the latter increases with decreasing hydrophobicity. Crystallization of the polylactide block induces the fusion of spherical micelles into worm‐like aggregates. Poly(ethylene glycol)‐poly(l‐/d‐lactide) stereocomplexes, on the other hand, assemble into rather irregular‐shaped clusters of spherical micelles and pearl‐necklace‐like structures.
We investigate the collective dynamics of thermoresponsive polymer poly(N-isopropylmethacrylamide) (PNIPMAM) in aqueous solution and in water/methanol mixtures in the one-phase region. In neat ...water, the polymer concentration c is varied in a wide range around the overlap concentration c*, that is estimated at 23 g L–1. Using dynamic light scattering (DLS), two decays (“modes”) are consistently observed in the intensity autocorrelation functions for c = 2–150 g L–1 with relaxation rates which are proportional to the square of the momentum transfer. Below c*, these are attributed to the diffusion of single chains and to clusters from PNIPMAM that are formed due to hydrophobic interactions. Above c*, they are assigned to the diffusion of the chain segments between overlap points and to long-range concentration fluctuations. From the temperature-dependent behavior of the overall scattering intensities and the dynamic correlation lengths of the fast mode, the critical temperatures and the scaling exponents are determined. The latter are significantly lower than the static values predicted by mean-field theory, which may be related to the presence of the large-scale inhomogeneities. The effect of the cosolvent methanol on the dynamics is investigated for polymer solutions having c = 30 g L–1 and methanol volume fractions in the solvent mixtures of up to 60 vol %. The phase diagram was established by differential scanning calorimetry. The slow mode detected by DLS becomes significantly weaker as methanol is added, i.e., the solutions become more homogeneous. Beyond the minimum of the coexistence line, which is located at 40–50 vol % of methanol, the dynamics is qualitatively different from the one at lower methanol contents. Thus, going from the water-rich to the methanol-rich side of the miscibility gap, the change of interaction of the PNIPMAM chains with the two solvents has a severe effect on the collective dynamics.
Sets of the nonionic polymers poly(
N
-vinyl isobutyramide) (pNVIBAm) and poly(
N
-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from ...about 20,000 to 150,000 kg mol
−1
, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(
N
-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and
N
,
N
-dimethylformamide.
Graphical Abstract
Poly(N-isopropylmethacrylamide) (PNIPMAM) is a stimuli-responsive polymer, which in thin film geometry exhibits a volume-phase transition upon temperature increase in water vapor. The swelling ...behavior of PNIPMAM thin films containing magnesium salts in water vapor is investigated in view of their potential application as nanodevices. Both the extent and the kinetics of the swelling ratio as well as the water content are probed with in situ time-of-flight neutron reflectometry. Additionally, in situ Fourier-transform infrared (FTIR) spectroscopy provides information about the local solvation of the specific functional groups, while two-dimensional FTIR correlation analysis further elucidates the temporal sequence of solvation events. The addition of Mg(ClO4)2 or Mg(NO3)2 enhances the sensitivity of the polymer and therefore the responsiveness of switches and sensors based on PNIPMAM thin films. It is found that Mg(NO3)2 leads to a higher relative water uptake and therefore achieves the highest thickness gain in the swollen state.
Combining high hydrophilicity with charge neutrality, polyzwitterions are intensely explored for their high biocompatibility and low-fouling properties. Recent reports indicated that in addition to ...charge neutrality, the zwitterion’s segmental dipole orientation is an important factor for interacting with the environment. Accordingly, a series of polysulfobetaines with a novel architecture was designed, in which the cationic and anionic groups of the zwitterionic moiety are placed at equal distances from the backbone. They were investigated by in vitro biofouling assays, covering proteins of different charges and model marine organisms. All polyzwitterion coatings reduced the fouling effectively compared to model polymer surfaces of poly(butyl methacrylate), with a nearly equally good performance as the reference polybetaine poly(3-(N-(2-(methacryloyloxy)ethyl)-N,N-dimethylammonio)propanesulfonate). The specific fouling resistance depended on the detailed chemical structure of the polyzwitterions. Still, while clearly affecting the performance, the precise dipole orientation of the sulfobetaine group in the polyzwitterions seems overall to be only of secondary importance for their antifouling behavior.
The remarkable stability of glycals under oxidative conditions becomes apparent by their redox data in solution, computed HOMO energies, and behavior on the addition of electrophilic radicals ...generated in the presence of cerium(IV) ammonium nitrate. Oxidation potentials up to 2.03 V vs ferrocene were obtained, which are exceptionally high for cyclic enol ethers but correlate nicely with the reaction times of the radical reactions. Protecting groups have a strong influence on the oxidation stability and HOMO energies of glycals as E ox is shifted from O-silyl over O-benzyl to O-acetyl by more than 500 mV. Interestingly, this effect must be transmitted through σ-bonds, even up to the para-position of a benzoate group, as verified by a wide variation of remote substituents in the carbohydrate. Favorable interactions of the σ*-orbital of the adjacent C−O bond with the HOMO of the double bond are proposed as a mechanistic rationale, which might be important for the redox behavior of other allylic systems. Finally, donors and acceptors in the 1-position exert the strongest influence on the oxidation stability, shifting the potentials by almost 1 V and resulting in different follow-up reactions of the cerium(IV)-mediated additions of malonates. It is the remarkable oxidation stability of glycals that makes them valuable building blocks in carbohydrate chemistry.
PDF
