Strongly lensed systems with peculiar configurations allow us to probe the local properties of the deflecting lens mass while simultaneously testing general profile assumptions. The quasar ...HE0230−2130 is lensed by two galaxies at similar redshifts (Δ
z
∼ 0.003) into four observed images. Using modeled quasar positions from fitting the brightness of the quasar images in ground-based imaging data from the
Magellan
telescope, we find that lens-mass models where each of these two galaxies is parametrized with a singular power-law (PL) profile predict five quasar images. One of the predicted images is unobserved despite it being distinctively offset from the lensing galaxies and likely bright enough to be observable. This missing image gives rise to new opportunities to study the mass distribution of these galaxies. To interpret the quad configuration of the system, we tested 12 different profile assumptions with the aim of obtaining lens-mass models that correctly predict only four observed images. We tested the effects of adopting: cored profiles for the lensing galaxies; external shear; and additional profiles to represent a dark matter clump. We find that half of our model classes can produce the correct image multiplicity. By comparing the Bayesian evidence of different model parametrizations, we favor two model classes: (i) one that incorporates two singular PL profiles for the lensing galaxies and a cored isothermal sphere in the region of the previously predicted fifth image (rNIS profile), and (ii) one with a bigger lensing galaxy parametrized by a singular PL profile and the smaller galaxy by a cored PL profile with external shear. We estimated the mass of the rNIS clump for each candidate model of our final Markov chain Monte Carlo sample, and find that only 2% are in the range of 10
6
M
⊙
≤
M
rNIS
≤ 10
9
M
⊙
, which is the predicted mass range of dark matter subhalos in cold dark matter simulations, or the mass of dark-matter-dominated and low-surface-brightness galaxies. We therefore favor the models with a cored mass distribution for the lens galaxy close to the predicted fifth image. Our study further demonstrates that lensed quasar images are sensitive to the dark matter structure in the gravitational lens. We are able to describe this exotic lensing configuration with relatively simple models, which demonstrates the power of strong lensing for studying galaxies and lens substructure.
Although the sharpness of a blade is responsible for cutting performance, there is no single and unambiguous literature definition of sharpness. The blade sharpness index (BSI) proposed by McCarthy ...et al. (Engineering Fracture Mechanics 74, 2205–2224, 2007) is a dimensionless number, derived from different cutting properties, to classify the sharpness of thin blades such as scalpels. In this study we transfer the BSI concept to blades with geometries typical in food cutting applications. After a series of cutting experiments at two velocities with blades that differed in wedge angle and abrasion state and by using three elastomers as substrate, we identified that the BSI can be regarded as a linear function of blade tip radius and force at cut initiation. The BSI was independent of cutting velocity, cutting substrate and wedge angle. Subsequently, cutting of foods with differently blunted blades revealed a specific impact on cutting performance, which depended on the food properties. Thus the BSI concept itself is helpful to classify the blade state, but it is less sufficient to evaluate the suitability of a knife with respect to a particular cutting application.
•Sharpness of blades for food processing is analyzed with different concepts.•The blade sharpness index is compared with optical and mechanical sharpness measures.•The blade sharpness index only depends on the blade tip radius.•Force at cut initiation provides an adequate and simple sharpness measure.•Sharpness alone can be insufficient to evaluate cutting performance of certain foods.
We present a detailed analysis of the inner mass structure of the Cosmic Horseshoe (J1148+1930) strong gravitational lens system observed with the Hubble Space Telescope (HST) Wide Field Camera 3 ...(WFC3). In addition to the spectacular Einstein ring, this systems shows a radial arc. We obtained the redshift of the radial arc counterimage zs, r = 1.961 ± 0.001 from Gemini observations. To disentangle the dark and luminous matter, we considered three different profiles for the dark matter (DM) distribution: a power law profile, the Navarro, Frenk, and White (NFW) profile, and a generalized version of the NFW profile. For the luminous matter distribution, we based the model on the observed light distribution that is fitted with three components: a point mass for the central light component resembling an active galactic nucleus, and the remaining two extended light components scaled by a constant mass-to-light ratio (M/L). To constrain the model further, we included published velocity dispersion measurements of the lens galaxy and performed a self-consistent lensing and axisymmetric Jeans dynamical modeling. Our model fits well to the observations including the radial arc, independent of the DM profile. Depending on the DM profile, we get a DM fraction between 60% and 70%. With our composite mass model we find that the radial arc helps to constrain the inner DM distribution of the Cosmic Horseshoe independently of the DM profile.
We present a search for galaxy-scale strong gravitational lenses in the initial 2500 square degrees of the Canada-France Imaging Survey (CFIS). We designed a convolutional neural network (CNN) ...committee that we applied to a selection of 2 344 002 exquisite-seeing
r
-band images of color-selected luminous red galaxies. Our classification uses a realistic training set where the lensing galaxies and the lensed sources are both taken from real data, namely the CFIS
r
-band images themselves and the
Hubble
Space Telescope (HST). A total of 9460 candidates obtain a score above 0.5 with the CNN committee. After a visual inspection of the candidates, we find a total of 133 lens candidates, of which 104 are completely new. The set of false positives mainly contains ring, spiral, and merger galaxies, and to a lesser extent galaxies with nearby companions. We classify 32 of the lens candidates as secure lenses and 101 as maybe lenses. For the 32 highest quality lenses, we also fit a singular isothermal ellipsoid mass profile with external shear along with an elliptical Sersic profile for the lens and source light. This automated modeling step provides distributions of properties for both sources and lenses that have Einstein radii in the range 0.5″ <
θ
E
< 2.5″. Finally, we introduce a new lens and/or source single-band deblending algorithm based on auto-encoder representation of our candidates. This is the first time an end-to-end lens-finding and modeling pipeline is assembled together, in view of future lens searches in a single band, as will be possible with
Euclid
.
Abstract Supernovae (SNe) that have been multiply imaged by gravitational lensing are rare and powerful probes for cosmology. Each detection is an opportunity to develop the critical tools and ...methodologies needed as the sample of lensed SNe increases by orders of magnitude with the upcoming Vera C. Rubin Observatory and Nancy Grace Roman Space Telescope. The latest such discovery is of the quadruply imaged Type Ia SN 2022qmx (aka, “SN Zwicky”) at z = 0.3544. SN Zwicky was discovered by the Zwicky Transient Facility in spatially unresolved data. Here we present follow-up Hubble Space Telescope observations of SN Zwicky, the first from the multicycle “LensWatch ( www.lenswatch.org )” program. We measure photometry for each of the four images of SN Zwicky, which are resolved in three WFC3/UVIS filters (F475W, F625W, and F814W) but unresolved with WFC3/IR F160W, and present an analysis of the lensing system using a variety of independent lens modeling methods. We find consistency between lens-model-predicted time delays (≲1 day), and delays estimated with the single epoch of Hubble Space Telescope colors (≲3.5 days), including the uncertainty from chromatic microlensing (∼1–1.5 days). Our lens models converge to an Einstein radius of θ E = ( 0.168 − 0.005 + 0.009 ) ″ , the smallest yet seen in a lensed SN system. The “standard candle” nature of SN Zwicky provides magnification estimates independent of the lens modeling that are brighter than predicted by ∼ 1.7 − 0.6 + 0.8 mag and ∼ 0.9 − 0.6 + 0.8 mag for two of the four images, suggesting significant microlensing and/or additional substructure beyond the flexibility of our image-position mass models.
HOLISMOKES Schuldt, S; Suyu, S H; Meinhardt, T ...
Astronomy & astrophysics,
02/2021, Letnik:
646
Journal Article
Recenzirano
Odprti dostop
Modeling the mass distributions of strong gravitational lenses is often necessary in order to use them as astrophysical and cosmological probes. With the large number of lens systems (≳105) expected ...from upcoming surveys, it is timely to explore efficient modeling approaches beyond traditional Markov chain Monte Carlo techniques that are time consuming. We train a convolutional neural network (CNN) on images of galaxy-scale lens systems to predict the five parameters of the singular isothermal ellipsoid (SIE) mass model (lens center x and y, complex ellipticity ex and ey, and Einstein radius θE). To train the network we simulate images based on real observations from the Hyper Suprime-Cam Survey for the lens galaxies and from the Hubble Ultra Deep Field as lensed galaxies. We tested different network architectures and the effect of different data sets, such as using only double or quad systems defined based on the source center and using different input distributions of θE. We find that the CNN performs well, and with the network trained on both doubles and quads with a uniform distribution of θE > 0.5″ we obtain the following median values with 1σ scatter: Δx = (0.00−0.30+0.30)″, Δy = (0.00−0.29+0.30)″, ΔθE = (0.07−0.12+0.29)″, Δex = −0.01−0.09+0.08, and Δey = 0.00−0.09+0.08. The bias in θE is driven by systems with small θE. Therefore, when we further predict the multiple lensed image positions and time-delays based on the network output, we apply the network to the sample limited to θE > 0.8″. In this case the offset between the predicted and input lensed image positions is (0.00−0.29+0.29)″ and (0.00−0.31+0.32)″ for the x and y coordinates, respectively. For the fractional difference between the predicted and true time-delay, we obtain 0.04−0.05+0.27. Our CNN model is able to predict the SIE parameter values in fractions of a second on a single CPU, and with the output we can predict the image positions and time-delays in an automated way, such that we are able to process efficiently the huge amount of expected galaxy-scale lens detections in the near future.
ABSTRACT
SN 2018hti was a very nearby (z = 0.0614) superluminous supernova with an exceedingly bright absolute magnitude of −21.7 mag in r band at maximum. The densely sampled pre-maximum light ...curves of SN 2018hti show a slow luminosity evolution and constrain the rise time to ∼50 rest-frame d. We fitted synthetic light curves to the photometry to infer the physical parameters of the explosion of SN 2018hti for both the magnetar and the CSM-interaction scenarios. We conclude that one of two mechanisms could be powering the luminosity of SN 2018hti; interaction with ∼10 M⊙ of circumstellar material or a magnetar with a magnetic field of Bp∼ 1.3 × 1013 G, and initial period of Pspin∼ 1.8 ms. From the nebular spectrum modelling we infer that SN 2018hti likely results from the explosion of a ${\sim}40\, \mathrm{M}_\odot$ progenitor star.
HOLISMOKES Suyu, S H; Huber, S; Cañameras, R ...
Astronomy & astrophysics,
12/2020, Letnik:
644
Journal Article
Recenzirano
Odprti dostop
We present the HOLISMOKES programme on strong gravitational lensing of supernovae (SNe) as a probe of SN physics and cosmology. We investigate the effects of microlensing on early-phase SN Ia spectra ...using four different SN explosion models. We find that distortions of SN Ia spectra due to microlensing are typically negligible within ten rest-frame days after a SN explosion (< 1% distortion within the 1σ spread and ≲10% distortion within the 2σ spread). This shows the great prospects of using lensed SNe Ia to obtain intrinsic early-phase SN spectra for deciphering SN Ia progenitors. As a demonstration of the usefulness of lensed SNe Ia for cosmology, we simulate a sample of mock lensed SN Ia systems that are expected to have accurate and precise time-delay measurements in the era of the Rubin Observatory Legacy Survey of Space and Time (LSST). Adopting realistic yet conservative uncertainties on their time-delay distances and lens angular diameter distances, of 6.6% and 5%, respectively, we find that a sample of 20 lensed SNe Ia would allow us to constrain the Hubble constant (H0) with 1.3% uncertainty in the flat ΛCDM cosmology. We find a similar constraint on H0 in an open ΛCDM cosmology, while the constraint degrades to 3% in a flat wCDM cosmology. We anticipate lensed SNe to be an independent and powerful probe of SN physics and cosmology in the upcoming LSST era.
Procedures for the determination of cutting blade sharpness are based on mechanical methods (i.e., cutting tests) or image analysis to obtain geometrical properties (e.g., tip radius or tip offset). ...Any testing of the resistance of cutting blades against mechanical wear demands procedures which allow a defined and reliable abrasion. This study presents methods for the controlled abrasion of blades by time-controlled rotation in a bed of corundum and the resulting impact on cutting ability, which was evaluated by cutting of an elastomer. The impact on geometrical blade properties was analyzed microscopically by applying a replica technique. The results demonstrate that the extent of blade sharpness reduction significantly depends on the geometrical configuration of the abrasion procedure. It is also evident that mechanical blade analysis is much more sensitive in detecting wear than the geometrical approach, and is more suitable to elaborate differences in blade sharpness.
Display omitted
► Testing of resistance to mechanical wear demands defined and reliable abrasion methods. ► Wear procedures were performed on blades and analyzed by cutting and optical methods. ► The set-up of the abrasion procedure strongly affects blade characteristics. ► Analysis of cutting ability was more sensitive toward wear than geometrical analysis.