One of the fundamental questions of modern particle physics is the existence of finite electric dipole moments (EDM) of the hadrons. In case of charged particles, like protons and deuterons, the ...proposed method is the precise determination of the precession of the beam polarization vector in a storage ring. For that purpose, the JEDI (Jülich Electric Dipole moment Investigations) collaboration is developing a precise polarimeter detector based on LYSO scintillator coupled to SiPM modules. They are capable of stopping 300 MeV elastically scattered deuterons and protons. Precise measuring of the kinetic energy of the scattered projectiles ensures the accurate reaction identification leading to a precise polarization determination. To create the long-term reliable detector system, we have performed four iterations of the detector development. Currently, we are operating 52 LYSO modules with a dedicated dead-time less sampling ADC readout system. The modules are very compact, due to modern high pixel density SiPM readout.
Based on the notion that the local dark-matter field of axions or axionlike particles (ALPs) in our Galaxy induces oscillating couplings to the spins of nucleons and nuclei (via the electric dipole ...moment of the latter and/or the paramagnetic axion-wind effect), we establish the feasibility of a new method to search for ALPs in storage rings. Based on previous work that allows us to maintain the in-plane polarization of a stored deuteron beam for a few hundred seconds, we perform a first proof-of-principle experiment at the Cooler Synchrotron (COSY) to scan momenta near 970 MeV/c. This entails a scan of the spin-precession frequency. At resonance between the spin-precession frequency of deuterons and the ALP-induced electric dipole moment (EDM) oscillation frequency, there is an accumulation of the polarization component out of the ring plane. Since the axion frequency is unknown, the momentum of the beam and, consequently, the spin-precession frequency are ramped to search for a vertical polarization change that occurs when the resonance is crossed. At COSY, four beam bunches with different polarization directions are used to make sure that no resonance is missed because of the unknown relative phase between the polarization precession and the axion or ALP field. A frequency window of 1.5 kHz width around the spin-precession frequency of 121 kHz is scanned. We describe the experimental procedure and a test of the methodology with the help of a radio-frequency Wien filter located on the COSY ring. No ALP resonance is observed. As a consequence, an upper limit of the oscillating EDM component of the deuteron as well as its axion coupling constants are provided.
The motivation of the current R&D project is based upon the requirements of the JEDI international collaboration11http://collaborations.fz-juelich.de/ikp/jedi/. aiming to measure Electric Dipole ...Moments (EDMs) of charged particles in storage rings. One of the most important elements of such an experiment will be a specially designed polarimeter with the detection system based on a modular inorganic scintillator (LYSO crystal) calorimeter. The calorimeter modules are read out by Silicon Photo Multipliers (SiPMs). This paper describes the development of a multi-channel power supply for the polarimeter modules, providing very stable and clean bias voltages for SiPMs. In order to ensure the best possible performance of SiPMs in conjunction with the crystal-based calorimeter modules and to guarantee the required level of calorimeter stability, several quality requirements have to be met by the power supply. Additionally, it is required to provide features including remote control via the network, ramping of the output voltage, measuring and sending the information about its output voltages and currents, etc. The obtained results demonstrate that the goals for the JEDI polarimeter are met. The developed hardware will be useful in other fields of fundamental and applied research, medical diagnostic techniques and industry, where SiPMs are used.
A measurement of vector analyzing powers in elastic deuteron-carbon scattering has been performed at the Cooler Synchrotron COSY of Forschungszentrum Jülich, Germany. Seven kinetic beam energies ...between 170 and 380 MeV have been used. A vector-polarized beam from a polarized deuteron source was injected, accelerated to the final desired energy and stored in COSY. A thin needle-shaped diamond strip was used as a carbon target, onto which the beam was slowly steered. Elastically scattered deuterons were identified in the forward direction using various layers of scintillators and straw tubes. Where data exist in the literature (at 200 and 270 MeV), excellent agreement of the angular shape was found. The beam polarization of the presented data was deduced by fitting the absolute scale of the analyzing power to these references. Our results extend the world data set and are necessary for polarimetry of future electric dipole moment searches at storage rings. They will as well serve as an input for theoretical description of polarized hadron-hadron scattering.
Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric ...spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.
In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. ...Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.
The J\"ulich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement ...is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields on the polarization vector. In this paper, the development of a beam-based alignment technique is described that was developed and implemented at the COoler SYnchrotron (COSY) at Forschungszentrum J\"ulich. Well aligned quadrupoles permit one to absolutely calibrate the Beam Position Monitors (BPMs). The method is based on the fact that a particle beam, which does not pass through the center of a quadrupole, experiences a deflection. The precision reached by the method is approximately 40 micro meter. Some consequences for the design of a new high precision storage ring for EDM mesasurements are discussed.
The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly \(^3\)He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle ...spin axis. Statistical sensitivities could approach 10\(^{-29}\) e\(\cdot\)cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM. The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.
PDF
