Alveolar macrophages resident in the lung are prominent phagocytic effector cells of the pulmonary innate immune response, and paradoxically, are attractive harbors for pathogens. Consequently, ...facultative intracellular bacteria, such as Francisella tularensis, can cause severe systemic disease and sepsis, with high morbidity and mortality associated with pulmonary infection. Current clinical treatment, which involves exhaustive oral or intravenous antibiotic therapy, has limitations such as systemic toxicity and off-target effects. Pulmonary administration represents a promising alternative to systemic dosing for delivering antibiotics directly to the lung. Here, we present synthesized mannosylated ciprofloxacin polymeric prodrugs for efficient pulmonary delivery, targeting, and subsequent internalization by alveolar macrophages. We demonstrate significant improvement in efficacy against intracellular infections in an otherwise uniformly lethal airborne Francisella murine model (F. novicida). When administered to the lungs of mice in a prophylactic regimen, the mannosylated ciprofloxacin polymeric prodrugs led to 50% survival. In a treatment regimen that was concurrent with infection, the survival of mice increased to 87.5%. Free ciprofloxacin antibiotic was ineffective in both cases. This significant difference in antibacterial efficacy demonstrates the impact of this delivery platform based on improved physiochemical, pharmacokinetic, and pharmacodynamic properties of ciprofloxacin administered via our glycan polymeric prodrug. This modular platform provides a route for overcoming the limitations of free drug and increasing efficacy in treatment of intracellular infection.
Display omitted
Receptor-mediated, cell-specific delivery of siRNA enables silencing of target genes in specific tissues, opening the door to powerful therapeutic options for a multitude of diseases. However, the ...development of delivery systems capable of targeted and effective siRNA delivery typically requires multiple steps and the use of sophisticated, orthogonal chemistries. Previously, we developed diblock copolymers consisting of dimethaminoethyl methacrylate-b-dimethylaminoethyl methacrylate-co-butyl methacrylate-co-propylacrylic acid as potent siRNA delivery systems that protect siRNA from enzymatic degradation and enable its cytosolic delivery through pH-responsive, endosomolytic behavior. , These architectures were polymerized using a living radical polymerization method, specifically reversible addition–fragmentation chain transfer (RAFT) polymerization, which employs a chain transfer agent (CTA) to modulate the rate of reaction, resulting in polymers with low polydispersity and telechelic chain ends reflecting the chemistry of the CTA. Here we describe the straightforward, facile synthesis of a folate receptor-targeted diblock copolymer siRNA delivery system because the folate receptor is an attractive target for tumor-selective therapies as a result of its overexpression in a number of cancers. Specifically, we detail the de novo synthesis of a folate-functionalized CTA, use the folate-CTA for controlled polymerizations of diblock copolymers, and demonstrate efficient, specific cellular folate receptor interaction and in vitro gene knockdown using the folate-functionalized polymer.
Lung-based intracellular bacterial infections remain one of the most challenging infectious disease settings. For example, the current standard for treating Franciscella tularensis pneumonia ...(tularemia) relies on administration of oral or intravenous antibiotics that poorly achieve and sustain pulmonary drug bioavailability. Inhalable antibiotic formulations are approved and in clinical development for upper respiratory infections, but sustained drug dosing from inhaled antibiotics against alveolar intracellular infections remains a current unmet need. To provide an extended therapy against alveolar intracellular infections, we have developed a macromolecular therapeutic platform that provides sustained local delivery of ciprofloxacin with controlled dosing profiles. Synthesized using RAFT polymerization, these macromolecular prodrugs characteristically have high drug loading (16–17 wt % drug), tunable hydrolysis kinetics mediated by drug linkage chemistry (slow-releasing alkyllic vs fast-releasing phenolic esters), and, in general, represent new fully synthetic nanotherapeutics with streamlined manufacturing profiles. In aerosolized and completely lethal F.t. novicida mouse challenge models, the fast-releasing ciprofloxacin macromolecular prodrug provided high cure efficiencies (75% survival rate under therapeutic treatment), and the importance of release kinetics was demonstrated by the inactivity of the similar but slow-releasing prodrug system. Pharmacokinetics and biodistribution studies further demonstrated that the efficacious fast-releasing prodrug retained drug dosing in the lung above the MIC over a 48 h period with corresponding C max/MIC and AUC0–24h/MIC ratios being greater than 10 and 125, respectively; the thresholds for optimal bactericidal efficacy. These findings identify the macromolecular prodrug platform as a potential therapeutic system to better treat alveolar intracellular infections such as F. tularensis, where positive patient outcomes require tailored antibiotic pharmacokinetic and treatment profiles.
Purpose
In order to improve the detection limit of existing HIV diagnostic assays, we explored the use of a temperature-responsive magnetic nanoparticle reagent system in conjunction with ...cyanovirin-N for HIV recognition to rapidly and efficiently concentrate viral particles from larger sample volumes, ~ 1 ml.
Methods
Cyanovirin-N (CVN) mutant, Q62C, was expressed, biotinylated, and then complexed with a thermally responsive polymer-streptavidin conjugate. Confirmation of protein expression/activity was performed using matrix assisted laser desorption/ionization (MALDI) and a TZM-bl HIV inhibition assay. Biotinylated CVN mutant recognition with gp120 was characterized using surface plasmon resonance (SPR). Virus separation and enrichment using a thermoresponsive magnetic nanoparticle reagent system were measured using RT-PCR.
Results
Biotinylated Q62C exhibited a K
D
of 0.6 nM to gp120. The temperature-responsive binary reagent system achieved a maximum viral capture of nearly 100% HIV, 1 × 10
5
virus copies in 100 μl, using pNIPAAm-Q62C within 30 minutes. Additionally, the same reagent system achieved nearly 9-fold enrichment by processing a 10-times larger sample of 1000 μl (Fig.
3
).
Conclusion
This work demonstrated a temperature-responsive reagent system that provides enrichment of HIV using antiviral lectin CVN for recognition, which is potentially amenable for use in point-of-care settings.
The push−pull conjugated molecules 2,7-bis-(1H-pyrrol-2-yl)ethynyl-1,8-naphthyridine (BPN) and 2,7-bis(1H-indol-2-yl)ethynyl-1,8-naphthyridine (BIN) adopting daad relays of proton donors (d) and ...acceptors (a) form multiple hydrogen-bonding complexes with various monosaccharides that possess complementary adda sequences. Although the free BPN emits blue light at λmax = 475 nm in CH2Cl2, its complexation with octyl β-d-glucopyranoside gives green fluorescence at λmax = 535 nm. The excellent photophysical properties make BPN a highly sensitive probe for monitoring glucopyranoside to a detection limit of ∼100 pM. On the other hand, the CD-silent BIN molecule binds with monosaccharides to form the CD-active multiple hydrogen-bonding complexes, which exhibit the remarkable chirality dependent helicities consistent with the prediction by the ab initio approaches. On the basis of the similar daad cleft and hence the binding property, the fluorescence and CD absorption methods in BPN and BIN, respectively, are complementary, which, in combination with computational molecular modeling, not only give a detailed insight into the structures of the receptor-saccharide complexes in solution, but also differentiate octyl β-d-glucopyranoside from its enantiomer and other monosaccharides.
Peptides derived from the third Bcl-2 homology domain (BH3) renormalize apoptotic signaling by antagonizing prosurvival Bcl-2 family members. These potential peptide drugs exhibit therapeutic ...activities but are limited by barriers including short circulation half-lives and poor penetration into cells. A diblock polymeric micelle carrier for the BIM BH3 peptide was recently described that demonstrated antitumor activity in a B-cell lymphoma xenograft model Berguig et al., Mol. Ther. 2015, 23, 907–917. However, the disulfide linkage used to conjugate the BIM peptide was shown to have nonoptimal blood stability. Here we describe a peptide macromonomer composed of BIM capped with a four amino acid cathepsin B substrate (FKFL) that possesses high blood stability and is cleaved to release the drug inside of target cells. Employing RAFT polymerization, the peptide macromonomer was directly integrated into a multifunctional diblock copolymer tailored for peptide delivery. The first polymer block was made as a macro-chain transfer agent (CTA) and composed of a pH-responsive endosomolytic formulation of N,N-diethylaminoethyl methacrylate (DEAEMA) and butyl methacrylate (BMA). The second polymer block was a copolymer of the peptide and polyethylene glycol methacrylate (PEGMA). PEGMA monomers of two sizes were investigated (300 Da and 950 Da). Protein gel analysis, high performance liquid chromatography, and coupled mass spectrometry (MS) showed that incubation with cathepsin B specifically cleaved the FKFL linker and released active BIM peptide with PEGMA300 but not with PEGMA950. MALDI-TOF MS showed that incubation of the peptide monomers alone in human serum resulted in partial cleavage at the FKFL linker after 12 h. However, formulation of the peptides into polymers protected against serum-mediated peptide degradation. Dynamic light scattering (DLS) demonstrated pH-dependent micelle disassembly (25 nm polymer micelles at pH 7.4 versus 6 nm unimers at pH 6.6), and a red blood cell lysis assay showed a corresponding increase in membrane destabilizing activity (<1% lysis at pH 7.4 versus 95% lysis at pH 6.6). The full carrier–drug system successfully induced apoptosis in SKOV3 ovarian cancer cells in a dose-dependent manner, in comparison to a control polymer containing a scrambled BIM peptide sequence. Mechanistic analysis verified target-dependent activation of caspase 3/7 activity (8.1-fold increase), and positive annexin V staining (72% increase). The increased blood stability of this enzyme-cleavable peptide polymer design, together with the direct polymerization approach that eliminated postsynthetic conjugation steps, suggests that this new carrier design could provide important benefits for intracellular peptide drug delivery.
Intracellular bacterial infections localized to the lung alveolar macrophage (AM) remain one of the most challenging settings for antimicrobial therapy. Current systemic antibiotic treatment fails to ...deliver sustained doses to intracellular bacterial reservoirs, which necessitates prolonged treatment regimens. Herein, we demonstrate a new intracellular enzyme-cleavable polymeric prodrug with tailored ciprofloxacin release profiles in the lungs and AM. The targeted polymeric prodrug, termed “drugamers”, incorporates (1) hydrophilic mannose residues to solubilize the antibiotic cargo and to target and enhance AM uptake and intracellular delivery, and (2) enzyme-cleavable linkage chemistry to provide high and sustained intracellular AM drug dosing. Prodrug monomers, derived from the antibiotic ciprofloxacin, were synthesized with either an intracellular protease cleavable dipeptide linker or a hydrolytic phenyl ester linker. RAFT polymerization was used to copolymerize the prodrug monomers and mannose monomer to synthesize well-defined drugamers without requiring a post-polymerization conjugation step. In addition to favorable in vivo safety profiles following intratracheal administration, a single dose of the drugamers sustained ciprofloxacin dosing in lungs and AMs above the minimum inhibitory concentration (MIC) over at least a 48 h period. The enzyme-cleavable therapeutic achieved a >10-fold increase in sustained ciprofloxacin in AM, and maintained a significantly higher whole lung PK as well. Ciprofloxacin dosed in identical fashion displayed rapid clearance with a half-life of approximately 30 min. Notably, inhalation of the mannose-targeted ciprofloxacin drugamers achieved full survival (100%) in a highly lethal mouse model of pneumonic tularemia, contrasted with 0% survival using free ciprofloxacin. These findings demonstrate the versatility of the drugamer platform for engineering the intracellular pharmacokinetic profiles and its strong therapeutic activity in treating pulmonary intracellular infections.
Display omitted
•Enzyme-cleavable prodrug increases intracellular dosing profile >10×.•Antibiotic prodrugs achieve full survival in lethal Francisella model.•Drugamers achieve unique pharmacokinetics/efficacy for pulmonary infection therapy.
Peptide-based cancer vaccines offer production and safety advantages but have had limited clinical success due to their intrinsic instability, rapid clearance, and low cellular uptake. ...Nanoparticle-based delivery vehicles can improve the in vivo stability and cellular uptake of peptide antigens. Here, a well-defined, self-assembling mannosylated polymer is developed for anticancer peptide antigen delivery. The amphiphilic polymer is prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization, and the peptide antigens are conjugated to the pH-sensitive hydrophobic block through the reversible disulfide linkage for selective release after cell entry. The polymer-peptide conjugates self-assemble into sub-100 nm micelles at physiological pH and dissociate at endosomal pH. The mannosylated micellar corona increases the accumulation of vaccine cargoes in the draining inguinal lymph nodes and facilitates nanoparticle uptake by professional antigen presenting cells. In vivo studies demonstrate that the mannosylated micelle formulation improves dendritic cell activation and enhances antigen-specific T cell responses, resulting in higher antitumor immunity in tumor-bearing mice compared to free peptide antigen. The mannosylated polymer is therefore a simple and promising platform for the delivery of peptide cancer vaccines.
Clinical studies have validated that antiretroviral (ARV) drugs can serve as an HIV pre-exposure prophylactic (PrEP) strategy. Dosing adherence remains a crucial factor determining the final efficacy ...outcomes, and both long-acting implants and injectable depot systems are being developed to improve patient adherence. Here, we describe an injectable depot platform that exploits a new mechanism for both formation and controlled release. The depot is a polymeric prodrug synthesized from monomers that incorporate an ARV drug tenofovir alafenamide (TAF) with degradable linkers that can be designed to control release rates. The prodrug monomers are synthetically incorporated into homopolymer or block designs that exhibit high drug weight percent (wt%) and also are hydrophobized in these prodrug segments to drive depot formation upon injection. Drug release converts those monomers to more hydrophilic pendant groups via linker cleavage, and as this drug release proceeds, the polymer chains losing hydrophobicity are then disassociated from the depot and released over time to provide a depot dissolution mechanism. We show that long-acting TAF depots can be designed as block copolymers or as homopolymers. They can also be designed with different linkers, for example with faster or slower degrading p-hydroxybenzyloxycarbonyl (Benzyl) and ethyloxycarbonyl (Alkyl) linkers, respectively. Diblock designs of p(glycerol monomethacrylate)-b-p(Alkyl-TAF-methacrylate) and p(glycerol monomethacrylate)-b-p(Benzyl-TAF-methacrylate) were first characterized in a mouse subcutaneous injection model. The alkylcarbamate linker design (TAF 51 wt%) showed excellent sustained release profiles of the key metabolite tenofovir (TFV) in skin and plasma over a 50-day period. Next, the homopolymer design with a high TAF drug wt% of 73% was characterized in the same model. The homopolymer depots with p(Alkyl-TAFMA) exhibited sustained TFV and TAF release profiles in skin and blood over 60 days, and TFV-DP concentrations in peripheral blood mononuclear cells (PBMC) were found to be at least 10-fold higher than the clinically suggested minimally EC90 protective concentration of 24 fmol/106 cells. These are the first reports of sustained parent TAF dosing observed in mouse and TFV-DP in mouse PBMC. IVIS imaging of rhodamine labeled homopolymer depots showed that degradation and release of the depot coincided with the sustained TAF release. Finally, these polymers showed excellent stability in accelerated stability studies over a six-month time period, and exceptional solubility of over 700 mg/mL in the DMSO formulation solvent. The homopolymer designs have a drug reservoir potential of well over a year at mg/day dosing and may not require cold chain storage for global health and developed world long-acting drug delivery applications.
Display omitted