The angular distribution of the light reflected by the Earth's surface influences top-of-atmosphere (TOA) reflectance values. This surface reflectance anisotropy has implications for UV/Vis satellite ...retrievals of albedo, clouds, and trace gases such as nitrogen dioxide (NO2). These retrievals routinely assume the surface to reflect light isotropically. Here we show that cloud fractions retrieved from GOME-2A and OMI with the FRESCO and OMCLDO2 algorithms have an east–west bias of 10 % to 50 %, which are highest over vegetation and forested areas, and that this bias originates from the assumption of isotropic surface reflection. To interpret the across-track bias with the DAK radiative transfer model, we implement the bidirectional reflectance distribution function (BRDF) from the Ross–Li semi-empirical model. Testing our implementation against state-of-the-art RTMs LIDORT and SCIATRAN, we find that simulated TOA reflectance generally agrees to within 1 %. We replace the assumption of isotropic surface reflection in the equations used to retrieve cloud fractions over forested scenes with scattering kernels and corresponding BRDF parameters from a daily high-resolution database derived from 16 years' worth of MODIS measurements. By doing this, the east–west bias in the simulated cloud fractions largely vanishes. We conclude that across-track biases in cloud fractions can be explained by cloud algorithms that do not adequately account for the effects of surface reflectance anisotropy. The implications for NO2 air mass factor (AMF) calculations are substantial. Under moderately pollutedNO2 and backward-scattering conditions, clear-sky AMFs are up to 20 % higher and cloud radiance fractions up to 40 % lower if surface anisotropic reflection is accounted for. The combined effect of these changes is that NO2 total AMFs increase by up to 30 % for backward-scattering geometries (and decrease by up to 35 % for forward-scattering geometries), which is stronger than the effect of either contribution alone. In an unpolluted troposphere, surface BRDF effects on cloud fraction counteract (and largely cancel) the effect on the clear-sky AMF. Our results emphasise that surface reflectance anisotropy needs to be taken into account in a coherent manner for more realistic and accurate retrievals of clouds andNO2 from UV/Vis satellite sensors. These improvements will be beneficial for current sensors, in particular for the recently launched TROPOMI instrument with a high spatial resolution.
The ultraviolet (UV) Absorbing Aerosol Index (AAI) is widely used as an indicator for the presence of absorbing aerosols in the atmosphere. Here we consider the TROPOMI AAI based on the 340 nm/380 nm ...wavelength pair. We investigate the effects of clouds on the AAI observed at small and large scales. The large-scale effects are studied using an aggregate of TROPOMI measurements over an area mostly devoid of absorbing aerosols (Pacific Ocean). The study reveals that several structural features can be distinguished in the AAI, such as the cloud bow, viewing zenith angle dependence, sunglint, and a previously unexplained increase in AAI values at extreme viewing and solar geometries. We explain these features in terms of the bidirectional reflectance distribution function (BRDF) of the scene in combination with the different ratios of diffuse and direct illumination of the surface at 340 and 380 nm. To reduce the dependency on the BRDF and homogenize the AAI distribution across the orbit, we present three different AAI retrieval models: the traditional Lambertian scene model (LSM), a Lambertian cloud model (LCM), and a scattering cloud model (SCM). We perform a model study to assess the propagation of errors in auxiliary databases used in the cloud models. The three models are then applied to the same low-aerosol region. Results show that using the LCM and SCM gives on average a higher AAI than the LSM. Additionally, a more homogeneous distribution is retrieved across the orbit. At the small scale, related to the high spatial resolution of TROPOMI, strong local increases and decreases in AAI are observed in the presence of clouds. The BRDF effect presented here is a first step – more research is needed to explain the small-scale cloud effects on the AAI.
The purpose of the EUNADICS-AV (European Natural Airborne Disaster
Information and Coordination System for Aviation) prototype early warning
system (EWS) is to develop the combined use of harmonised ...data products from satellite, ground-based and in situ instruments to produce alerts of airborne hazards (volcanic, dust, smoke and radionuclide clouds), satisfying the requirement of aviation air traffic management (ATM) stakeholders (https://cordis.europa.eu/project/id/723986, last access: 5 November 2021). The alert products developed by the EUNADICS-AV EWS, i.e. near-real-time (NRT) observations, email notifications and netCDF (Network Common Data Form) alert data products (called NCAP files), have shown significant interest in using selective detection of natural airborne hazards from polar-orbiting satellites. The combination of several sensors inside a single global system demonstrates the advantage of using a triggered approach to obtain selective detection from observations, which cannot initially discriminate the different aerosol types. Satellite products from hyperspectral ultraviolet–visible (UV–vis) and infrared (IR) sensors (e.g. TROPOMI – TROPOspheric Monitoring Instrument – and IASI – Infrared Atmospheric Sounding Interferometer) and a broadband geostationary imager (Spinning Enhanced Visible and InfraRed Imager; SEVIRI) and retrievals from ground-based networks (e.g. EARLINET – European Aerosol Research Lidar Network, E-PROFILE and the regional network from volcano observatories) are combined by our system to create tailored alert products (e.g. selective ash detection, SO2 column and plume height, dust cloud, and smoke from wildfires). A total of 23 different alert products are implemented, using 1 geostationary and 13 polar-orbiting satellite platforms, 3 external existing service, and 2 EU and 2 regional ground-based networks. This allows for the identification and the tracking of extreme events. The EUNADICS-AV EWS has also shown the need to implement a future relay of radiological data (gamma dose rate and radionuclides concentrations in ground-level air) in the case of a nuclear accident. This highlights the interest of operating early warnings with the use of a homogenised dataset. For the four types of airborne hazard, the EUNADICS-AV EWS has demonstrated its capability to provide NRT alert data products to trigger data assimilation and dispersion modelling providing forecasts and inverse modelling for source term estimate. Not all of our alert data products (NCAP files) are publicly disseminated. Access to our alert products is currently restricted to key users (i.e. Volcanic Ash Advisory Centres, national meteorological services, the World Meteorological Organization, governments, volcano observatories and research collaborators), as these are considered pre-decisional products. On the other hand, thanks to the EUNADICS-AV–SACS (Support to Aviation Control Service) web interface (https://sacs.aeronomie.be, last access: 5 November 2021), the main part of the satellite observations used by the EUNADICS-AV EWS is shown in NRT, with public email notification of volcanic emission and delivery of tailored images and NCAP files. All of the ATM stakeholders (e.g. pilots, airlines and passengers) can access these alert products through this free channel.
In recent decades, there has been an increasing interest in making use of satellite measurements for identifying trends in atmospheric composition and climate. Instruments like GOME-2 and TROPOMI are ...dedicated to air-quality and global trace gas monitoring. For the accurate retrieval of columnar information of the trace gases, cloud correction is necessary. This work is meant to examine the quality of the GOME-2 operational cloud product from AC SAF and to propose enhancements of the current dataset to improve the retrieval of the NO2 and HCHO tropospheric gases.
Global mapping of satellite tropospheric NO2 vertical column density (VCD), a key gas in air quality monitoring, requires accurate retrievals over complex urban and industrialized areas and under any ...atmospheric conditions. The high abundance of aerosol particles in regions dominated by anthropogenic fossil fuel combustion, e.g. megacities, and/or biomass-burning episodes, affects the space-borne spectral measurement. Minimizing the tropospheric NO2 VCD biases caused by aerosol scattering and absorption effects is one of the main retrieval challenges from air quality satellite instruments. In this study, the reference Ozone Monitoring Instrument (OMI) DOMINO-v2 product was reprocessed over cloud-free scenes, by applying new aerosol correction parameters retrieved from the 477 nm O2-O2 band, over eastern China and South America for 2 years (2006–2007). These new parameters are based on two different and separate algorithms developed during the last 2 years in view of an improved use of the OMI 477 nm O2-O2 band:the updated OMCLDO2 algorithm, which derives improved effective cloud parameters,the aerosol neural network (NN), which retrieves explicit aerosol parameters by assuming a more physical aerosol model. The OMI aerosol NN is a step ahead of OMCLDO2 because it primarily estimates an explicit aerosol layer height (ALH), and secondly an aerosol optical thickness τ for cloud-free observations. Overall, it was found that all the considered aerosol correction parameters reduce the biases identified in DOMINO-v2 over scenes in China with high aerosol abundance dominated by fine scattering and weakly absorbing particles, e.g. from -20%:-40% to 0%:20% in summertime. The use of the retrieved OMI aerosol parameters leads in general to a more explicit aerosol correction and higher tropospheric NO2 VCD values, in the range of 0%:40%, than from the implicit correction with the updated OMCLDO2. This number overall represents an estimation of the aerosol correction strategy uncertainty nowadays for tropospheric NO2 VCD retrieval from space-borne visible measurements. The explicit aerosol correction theoretically includes a more realistic consideration of aerosol multiple scattering and absorption effects, especially over scenes dominated by strongly absorbing particles, where the correction based on OMCLDO2 seems to remain insufficient. However, the use of ALH and τ from the OMI NN aerosol algorithm is not a straightforward operation and future studies are required to identify the optimal methodology. For that purpose, several elements are recommended in this paper. Overall, we demonstrate the possibility of applying a more explicit aerosol correction by considering aerosol parameters directly derived from the 477 nm O2-O2 spectral band, measured by the same satellite instrument. Such an approach can, in theory, easily be transposed to the new-generation of space-borne instruments (e.g. TROPOMI on board Sentinel-5 Precursor), enabling a fast reprocessing of tropospheric NO2 data over cloud-free scenes (cloudy pixels need to be filtered out), as well as for other trace gas retrievals (e.g. SO2, HCHO).
Satellite remote sensing of aerosol is largely conducted at moderate or coarse spatial resolution around 1–10 km. Nevertheless, at urban areas with high human activity, aerosol can originate from ...complex emission sources and may also vary strongly in space. Therefore, aerosol characterization at fine spatial resolution is essential for air quality study and assessment of anthropogenic pollution as well as climate effects. However, space‐borne instruments with high spatial resolution are usually limited in swath width or spectral coverage which result in lowering information content required for aerosol and surface retrieval. Based on the Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm, we propose a hybrid approach by combining fine and coarse spatial resolution measurements to retrieve aerosol and surface properties simulataneously at fine spatial resolution. The instruments with coarse spatial resolution and high revisting time can provide advanced aerosol characterization. At the same time, the instruments with fine spatial resolution are sensitive to spatial variability of aerosol nearby sources. In this study, the GRASP/Hybrid approach is demonstrated and tested based on the European Space Agency Sentinel‐5p/TROPOMI together with the Italian Space Agency PRISMA satellite data. Specifically, the detailed aerosol microphysical properties from Sentinel‐5p/TROPOMI 10 km retrievals are used as a priori information for PRISMA to derive aerosol loading and surface properties at 100 meter (m) spatial resolution. The PRISMA 100 m aerosol and surface retrieval based on the developed GRASP/Hybrid approach are evaluated using available ground‐based and satellite measurements, including AERONET, VIIRS/DB aerosol and PRISMA Level 2 surface reflectance products.
Plain Language Summary
Both aerosol and surface characterization at high spatial resolution are always highly demanded especially over densely populated urban areas. However, the high spatial resolution space‐borne instruments typically have small swaths that, in general, reduce the possibility of aerosol and surface decoupling. In this paper, we develop a hybrid approach based on GRASP algorithm (GRASP/Hybrid) to retrieve aerosol and surface properties at fine spatial granularity by combining fine and coarse spatial resolution satellite data. The GRASP/Hybrid approach is demonstrated using European Space Agency (ESA) Sentinel‐5p/TROPOMI and Italian Space Agency (ASI) PRISMA (Hyperspectral Precursor of the Application Mission) measurements. Specifically, the detailed aerosol microphysical properties from Sentinel‐5p/TROPOMI 10 km retrievals are used as a priori information to derive aerosol loading and surface properties exploiting PRISMA at 100 m spatial resolution. Overall, the results obtained in this study demonstrate the big potential of the approach based on the combination of instruments for a number of climate and environment monitoring studies.
Key Points
Generalized Retrieval of Atmosphere and Surface Properties (GRASP)/Hybrid approach is developed and demonstrated using Sentinel‐5p/TROPOMI and PRISMA measurements
PRISMA 100 m aerosol and surface properties are retrieved based on GRASP/Hybrid approach and evaluated using reference data sets
We demonstrate the big potential of hybrid approach based on the combination of instruments for climate and environment studies
Solar-induced fluorescence (SIF) data from satellites are increasingly used as a proxy for photosynthetic activity by vegetation, and as a constraint on gross primary production. Here we report on ...improvements in the algorithm to retrieve mid-morning (09:30 hrs local time) SIF estimates on the global scale from GOME-2 sensor on the Metop-A satellite (GOME-2A) for the period 2007-2019. Our new SIFTER (Sun-Induced Fluorescence of Terrestrial Ecosystems Retrieval) v2 algorithm improves over a previous version by using a narrower spectral window that avoids strong oxygen absorption and is less sensitive to water vapour absorption, by constructing stable reference spectra from a 6-year period (2007-2012) of atmospheric spectra over the Sahara, and by applying a latitude-dependent zero-level adjustment that accounts for biases in the data product. We generated stable, good-quality SIF retrievals between January 2007 and June 2013, when GOME-2A degradation in the near infrared was still limited. After the narrowing of the GOME-2A swath in July 2013, we characterized the throughput degradation of the level-1 data in order to derive reflectance corrections and apply these for the SIF retrievals between July 2013 and December 2018. SIFTER v2 data compares well with the independent NASA v2.8 data product. Especially in the evergreen tropics, SIFTER v2 no longer shows the underestimates against other satellite products that were seen in SIFTER v1. The new data product includes uncertainty estimates for individual observations, and is best used for mostly clear-sky scenes, and when spectral residuals remain below a certain spectral autocorrelation threshold. Our results support the use of SIFTER v2 data to be used as an independent constraint on photosynthetic activity on regional to global scales.
Accurate knowledge of cloud properties is essential to the measurement of atmospheric composition from space. In this work we assess the quality of the cloud data from three Copernicus Sentinel-5 ...Precursor (S5P) TROPOMI cloud products: (i) S5P OCRA/ROCINN_CAL (Optical Cloud Recognition Algorithm/Retrieval of Cloud Information using Neural Networks;Clouds-As-Layers), (ii) S5P OCRA/ROCINN_CRB (Clouds-as-Reflecting Boundaries), and (iii) S5P FRESCO-S (Fast Retrieval Scheme for Clouds from Oxygen absorption bands - Sentinel). Target properties of this work are cloud-top height and cloud optical thickness (OCRA/ROCINN_CAL), cloud height (OCRA/ROCINN_CRB and FRESCO-S), and radiometric cloud fraction (all three algorithms). The analysis combines (i) the examination of cloud maps for artificial geographical patterns, (ii) the comparison to other satellite cloud data (MODIS, NPP-VIIRS, and OMI O.sub.2 -O.sub.2 ), and (iii) ground-based validation with respect to correlative observations (30 April 2018 to 27 February 2020) from the Cloudnet network of ceilometers, lidars, and radars. Zonal mean latitudinal variation of S5P cloud properties is similar to that of other satellite data. S5P OCRA/ROCINN_CAL agrees well with NPP VIIRS cloud-top height and cloud optical thickness and with Cloudnet cloud-top height, especially for the low (mostly liquid) clouds. For the high clouds, S5P OCRA/ROCINN_CAL cloud-top height is below the cloud-top height of VIIRS and of Cloudnet, while its cloud optical thickness is higher than that of VIIRS. S5P OCRA/ROCINN_CRB and S5P FRESCO cloud height are well below the Cloudnet cloud mean height for the low clouds but match on average better with the Cloudnet cloud mean height for the higher clouds. As opposed to S5P OCRA/ROCINN_CRB and S5P FRESCO, S5P OCRA/ROCINN_CAL is well able to match the lowest CTH mode of the Cloudnet observations. Peculiar geographical patterns are identified in the cloud products and will be mitigated in future releases of the cloud data products.
The angular distribution of the light reflected by the Earth's surface
influences top-of-atmosphere (TOA) reflectance values. This surface
reflectance anisotropy has implications for UV/Vis satellite ...retrievals of
albedo, clouds, and trace gases such as nitrogen dioxide (NO2). These
retrievals routinely assume the surface to reflect light isotropically. Here
we show that cloud fractions retrieved from GOME-2A and OMI with the FRESCO
and OMCLDO2 algorithms have an east–west bias of 10 % to 50 %, which
are highest over vegetation and forested areas, and that this bias originates
from the assumption of isotropic surface reflection. To interpret the
across-track bias with the DAK radiative transfer model, we implement the
bidirectional reflectance distribution function (BRDF) from the Ross–Li
semi-empirical model. Testing our implementation against state-of-the-art
RTMs LIDORT and SCIATRAN, we find that simulated TOA reflectance generally
agrees to within 1 %. We replace the assumption of isotropic surface
reflection in the equations used to retrieve cloud fractions over forested
scenes with scattering kernels and corresponding BRDF parameters from a daily
high-resolution database derived from 16 years' worth of MODIS measurements.
By doing this, the east–west bias in the simulated cloud fractions largely
vanishes. We conclude that across-track biases in cloud fractions can be
explained by cloud algorithms that do not adequately account for the effects
of surface reflectance anisotropy. The implications for NO2 air mass
factor (AMF) calculations are substantial. Under moderately polluted
NO2 and backward-scattering conditions, clear-sky AMFs are up to 20 %
higher and cloud radiance fractions up to 40 % lower if surface
anisotropic reflection is accounted for. The combined effect of these changes
is that NO2 total AMFs increase by up to 30 % for backward-scattering
geometries (and decrease by up to 35 % for forward-scattering
geometries), which is stronger than the effect of either contribution alone.
In an unpolluted troposphere, surface BRDF effects on cloud fraction
counteract (and largely cancel) the effect on the clear-sky AMF. Our results
emphasise that surface reflectance anisotropy needs to be taken into account
in a coherent manner for more realistic and accurate retrievals of clouds and
NO2 from UV/Vis satellite sensors. These improvements will be
beneficial for current sensors, in particular for the recently launched
TROPOMI instrument with a high spatial resolution.