Mutations in
cause Rett syndrome, a severe neurological disorder with autism-like features. Duplication of
also causes severe neuropathology. Both diseases display immunological abnormalities that ...suggest a role for MECP2 in controlling immune and inflammatory responses. Here, we used
-null zebrafish to study the potential function of Mecp2 as an immunological regulator. Mecp2 deficiency resulted in an increase in neutrophil infiltration and upregulated expression of the pro- and anti-inflammatory cytokines Il1b and Il10 as a secondary response to disturbances in tissue homeostasis. By contrast, expression of the proinflammatory cytokine tumor necrosis factor alpha (Tnfa) was consistently downregulated in
-null animals during development, representing the earliest developmental phenotype described for MECP2 deficiency to date. Expression of
was unresponsive to inflammatory stimulation, and was partially restored by re-expression of functional
Thus, Mecp2 is required for
expression during zebrafish development and inflammation. Finally, RNA sequencing of
-null embryos revealed dysregulated processes predictive for Rett syndrome phenotypes.
The article summarizes series of experiments devoted to studies of (n,xn) cross-sections by the activation method and states numerical values of measured cross-sections. The activation samples are ...used to measure neutron flux produced during accelerator driven system studies. The threshold (n,xn) reactions are used but experimental cross-section data of such reactions are mostly not available for neutron energies above 30MeV. We focused for this reason on activation materials (Al, Au, Bi, In Ta, and Y) commonly used for such purposes and we also measured other materials (Cu, Fe, I, Mg, Ni, and Zn). The cross-sections were studied using quasi mono-energetic neutron sources based on proton reactions in a 7Li target in the energy range from 17MeV up to 94MeV. We observed a good agreement of the obtained data with the experimental data in the EXFOR database and also with the calculations performed using the code TALYS 1.4. Many of presented measurements represent the first ever measurement for a given reaction at a given neutron energy.
•The cross-sections were studied in the energy range from 17MeV up to 94MeV.•Results are compared with TALYS code, EXFOR database and with the library IRDFF.•Many of presented measurements represent the first ever measurement.
HADES is a high acceptance di-electron spectrometer operating at SIS18, GSI, Germany aimed at study of hadron-proton, hadron-nucleus and nucleus-nucleus collisions at 1-4 AGeV beam energies. The new ...electromagnetic calorimeter (ECal) was added to the experimental setup in order to measure γ-quanta and thus extend its capabilities in study of π0-, η-mesons, production of neutral hyperons and to improve electron-to-hadron separation for the partcles with momenta p > 300 MeV/c. The first data taking with the ECal detector was carried out in March 2019 when Ag+Ag collisions at 1.23 AGeV and 1.58 AGeV beam energies were studied. The methods of reconstruction of the γγ invariant mass spectra from these data are discussed. The analysis includes several steps: calibration of each module of the ECal detector, identification of γ-quanta, reconstruction of γγ invariant mass spectra and subtraction of combinatorial background. The obtained results show experimental capabilities of the new detector and, after efficiency corrections, will allow to normalize yields of other particles.
HADES (High Acceptance Di-Electron Spectrometer) is located at the GSI (Helmholtzzentrum für Schwerionenforschung) Darmstadt. It is an experiment focused on the study of the hot and dense nuclear ...matter mainly via the detection of the di-lepton pairs. Electromagnetic CALorimeter (ECAL) was recently added to the HADES setup. This new subdetector allows measuring of photons from the decay of neutral mesons and resonances. It also allows to discriminate between electrons and pions in the high-momenta region over 400 MeV/c. ECAL follows same hexagonal geometry as HADES, i.e. it consists of six sectors in azimuth. The first four sectors were finished and commissioned in 2018. The first experiment with ECAL included in HADES setup took place on March 2019, investigating the Ag+Ag reaction at beam energy of 1.65 A GeV. During the commissioning, several issues popped up and they were addressed. The issues and their solution will be described in the article.
HADES is a large acceptance spectrometer operating at SIS18, GSI, Germany. It is aimed at exploration of QCD phase diagram at the ion beam energies of 1-2 AGeV in the region of high baryonic ...densities. The new segmented electromagnetic calorimeter (ECal) was built to extend experimental opportunities of the HADES detector. The electromagnetic calorimeter will allow to study new reaction channels involving the production of neutral mesons and neu-tral resonances in elementary and heavy-ion reactions via detection of their two photon decay. An additional advantage of such a device is the resulting improvement of the electron-to-pion separation at large momenta. The detector is based on 978 Cherenkov lead glass modules divided into 6 sectors, and it covers forward angles of 12° < θ < 45° and almost full azimuthal angle. Currently four out of six sectors planned are assembled in the experimental area. The first raw beam data obtained with the ECal detector in Ag+Ag reactions at 1.65 AGeV beam are presented.
During the last years, semiconductor avalanche detectors are being widely used as the replacement of classical PMTs in calorimeters for many HEP experiments. In this report, basic selection criteria ...for replacement of PMTs by solid state devices and specific problems in the investigation of detectors radiation hardness are discussed. The design and performance of the hadron calorimeters developed for the future high energy nuclear physics experiments at FAIR, NICA, and CERN are discussed. The Projectile Spectator Detector (PSD) for the CBM experiment at the future FAIR facility, the Forward Calorimeter for the NA61 experiment at CERN and the Multi Purpose Detector at the future NICA facility are reviewed. Moreover, new methods of data analysis and results interpretation for radiation experiments are described. Specific problems of development of detectors control systems and possibilities of reliability improvement of multi-channel detectors systems are shortly overviewed. All experimental material is based on the investigation of SiPM and MPPC at the neutron source in NPI Rez.
Behaviour of the slender steel arch supporting textile membranes in a membrane structure with respect to in-plane and out-of plane stability is investigated in the paper. In the last decades the ...textile membranes have been widely used to cover both common and exclusive structures due to progress in new membrane materials with eminent properties. Nevertheless, complex analysis of such membranes in interaction with steel structure (carbon stainless steel perimeter or supporting elements) is rather demanding, even with specialized software. Laboratory model of a large membrane structure simulating a shelter roof of a concert stage was tested and the resulting stress deflection values are presented. The model of a reasonable size was provided with prestressed membrane of PVC coated polyester fabric Ferrari® Précontraint 702S and tested under various loadings. The supporting steel structure consisted of two steel arch tubes from S355 grade steel and perimeter prestressed cables. The stability behaviour of the inner tube was the primary interest of the investigation. The SOFiSTiK software was used to analyse the structural behaviour in 3D. Numerical non-linear analysis of deflections and internal forces of the structure under symmetrical and asymmetrical loadings covers various membrane prestressing and specific boundary conditions. The numerical results are validated using test results. Finally, the preliminary recommendations for appropriate numerical modelling and stability design of the supporting structure are presented.
The Projectile Spectator Detector (PSD) of the CBM experiment at the future FAIR facility is a compensating lead-scintillator calorimeter designed to measure the energy distribution of the forward ...going projectile nucleons and nuclei fragments (reaction spectators) produced close to the beam rapidity. The detector performance for the centrality and reaction plane determination is reviewed based on Monte-Carlo simulations of gold-gold collisions by means of four different heavy-ion event generators. The PSD energy resolution and the linearity of the response measured at CERN PS for the PSD supermodule consisting of 9 modules are presented. Predictions of the calorimeter radiation conditions at CBM and response measurement of one PSD module equipped with neutron irradiated MPPCs used for the light read out are discussed.
The cross-sections of relativistic deuteron reactions on natural copper were studied in detail by means of activation method. The copper foils were irradiated during experiments with the model ...spallation targets in the Joint Institute for Nuclear Research. The irradiation of activation samples was performed by beams in the energy range from 1 to 8GeV. Residual nuclides were measured by the gamma spectrometry. While the EXFOR database contains sets of data for relativistic proton reactions, data for deuteron reactions in this energy range are almost missing. Lack of such experimental cross-section values prevents the use of copper foils from beam integral monitoring. For this reason our experiments focused on their measurement and completely new data were obtained in the energy region where no experimental data have been available so far. The copper monitors with their low sensitivity to fast neutrons will contribute to improvement of the beam integral determination during accelerator-driven system studies.
Current trend in nuclear reactor physics is a transition from technologies using thermal neutrons to technologies utilizing fast neutrons. Unfortunately focus was put mainly on the thermal neutrons ...for a long time and lead to very good knowledge about this low energy region, but very scarce coverage of the high energy region. This means that there is a gap in the knowledge of excitation functions for higher energies. This gap spreads from 20 MeV up to 1 GeV and higher. This is exactly the energy region needed for description of advanced nuclear systems such as accelerator driven systems (ADS). Our group from Nuclear Physics Institute (NPI) of the CAS is a member of an international collaboration Energy & Transmutation of Radioactive Waste (E&T RAW). This collaboration focuses on ADS for many years. In order to measure neutron field within ADS models it is necessary to know excitation functions of reactions used to monitor the neutron field. In many cases there are almost no experimental data for suitable reactions. Worse and quite common case is that there are no data at all. Therefore we are also focusing on measurements of these data in order to fill the databases as well as to allow further improvements of codes for nuclear data calculations.