A primary lead smelter operated in Santo Amaro City in Brazil from 1960 to 1993, leaving approximately 500,000 tons of industrial dross containing 2⁻3% of lead and other toxic elements that ...contaminated the industry grounds and the urban environment. This study aimed to present the local residents' perception towards soil contamination by the smelter. In a cross-sectional study, 208 residents from randomly selected households were interviewed about dross hazards and proposals for its management. A city map depicts the distribution and concentration of lead, cadmium, arsenic, zinc, nickel, and antimony, measured in the soil of the 39 households with visible smelter dross. Only one site complies with the soil quality reference values; 27 (69.2%) call for preventive measures, and 11 (28.2%) require intervention. The smelter dross continues widely spread over the city. Thirty (76.9%) out of the 39 residents were able to recognize the smelter dross on household surroundings. However, this ability was not associated with the concentrations of toxic elements in the soil of their residences and surroundings. The smelter and the local Prefecture were most frequently held liable for taking soil cleanup actions. The most frequently (38.0%) cited solution for managing the dross found in the households was "to provide the residents with information about health risks related to the dross".
The assessment of damage to indoor cultural heritage, in particular by pollutants, is nowadays a major and growing concern for curators and conservators. Nevertheless, although many museums have been ...widely investigated in Europe, the effects of particulate matter and gaseous pollutants in museums under tropical and subtropical climates and with different economic realities are still unclear. An important portion of the world's cultural heritage is currently in tropical countries where both human and financial resources for preserving museum collections are limited. Hence, our aim is to assess the damage that can be caused to the artwork by pollution in hot and humid environments, where air quality and microclimatic condition differences can cause deterioration. As a case study, particulate matter as well as gases were collected at the Oscar Niemeyer Museum (MON) in Curitiba, Brazil, where large modern and contemporary works of art are displayed.
NO2, SO2, O3, Acetic Acid, Formic Acids and BTEX, in the ambient air, were sampled by means of passive diffusive sampling and their concentrations were determined by IC or GC–MS.
The particulate matter was collected in bulk form and analyzed with the use of energy dispersive X-ray fluorescence and aethalometer. The chemical compositions of individual particles were quantitatively elucidated, including low-Z components like C, N and O, as well as higher-Z elements, using automated electron probe microanalysis. The gaseous and particulate matter levels were then compared with the concentrations obtained for the same pollutants in other museums, located in places with different climates, and with some reference values provided by international cultural heritage conservation centers. Results are interpreted separately and as a whole with the specific aim of identifying compounds that could contribute to the chemical reactions taking place on the surfaces of artifacts and which could potentially cause irreversible damage to the artworks.
•Analysis of compounds that participate in reactions that damage artwork surfaces.•Aim: assess damage to artwork caused by pollution in hot and humid environments.•MON has satisfactory air quality when compared to other international museums.•The situation could improve by using higher efficiency filters in the HVAC system.
This study reviewed the use of fractal analysis (FA) in dental images.
A search was performed using PubMed, MEDLINE, LILACS, Web of Science and SCOPUS databases. The inclusion criteria were human ...studies in the English language, with no date restriction.
78 articles were found in which FA was applied to panoramic radiographs (34), periapical radiographs (21), bitewing radiographs (4), cephalometric radiograph (1), cone beam CT (15), micro-CT (3), sialography (2), and ultrasound (2). Low bone mineral density (21) and systemic or local diseases (22) around the bone of dental implants were the main subjects of the study of FA. Various sizes and sites of the regions of interest were used to evaluate the bone structure. Different ways were used to treat the image and to calculate FA. FA of 43 articles showed significant differences in the comparison of groups, mainly between healthy and sick patients.
FA in Dentistry has been widely applied to the study of images. Panoramic and periapical radiographs were those most frequently used. The
software and the box-counting method were extensively adopted in the studies reviewed herein. Further studies are encouraged to improve clarification of the parameters that directly influence FA.
Apresentação da Edição Especial de 20 anos da Revista Maracanan, periódico científico editado pelos professores do Programa de Pós-graduação em História da Universidade do Estado do Rio de ...Janeiro. Seu primeiro número foi impresso em 1999; a partir de 2014, passou para o formato eletrônico; e, a partir de 2019, ganhou publicação quadrimestral, com edições em janeiro, maio e setembro. O presente caderno traz o dossiê "As vidas abertas da América Latina: escritas (auto)biográficas", com colaborações de pesquisadores de diversas instituições do Brasil e do exterior.
The use of alcohol fuel has received much attention since 1980s. In Brazil, ethanol-fueled vehicles have been currently used on a large scale. This paper reports the atmospheric methanol, ethanol and ...isopropanol concentrations which were measured from May to December 1997, in Osaka, Japan, where alcohol fuel was not used, and from 3 to 9 February 1998, in Sao Paulo, Brazil, where ethanol fuel was used. The alcohols were determined by the alkyl nitrite formation reaction using gas chromatography (GC-ECD) analysis. The concentration of atmospheric alcohols, especially ethanol, measured in Sao Paulo were significantly higher than those in Osaka. In Osaka, the average concentrations of atmospheric methanol, ethanol, and isopropanol were 5.8±3.8, 8.2±4.6, and 7.2±5.9
ppbv, respectively. The average ambient levels of methanol, ethanol, and isopropanol measured in Sao Paulo were 34.1±9.2, 176.3.±38.1, and 44.2±13.7
ppbv, respectively. The ambient levels of aldehydes, which were expected to be high due to the use of alcohol fuel, were also measured at these sampling sites. The atmospheric formaldehyde average concentration measured in Osaka was 1.9±0.9 ppbv, and the average acetaldehyde concentration was 1.5±0.8
ppbv. The atmospheric formaldehyde and acetaldehyde average concentrations measured in Sao Paulo were 5.0±2.8 and 5.4±2.8
ppbv, respectively. The C
2H
5OH/CH
3OH and CH
3CHO/HCHO were compared between the two measurement sites and elsewhere in the world, which have already been reported in the literature. Due to the use of ethanol-fueled vehicles, these ratios, especially C
2H
5OH/CH
3OH, are much higher in Brazil than these measured elsewhere in the world.
Introduction. The effect of different kinds of work on the psychosocial assessment of workers under the same management and organizational environment is investigated. Methods. A voluntary assessment ...in a utility company was carried out using the short version of the Copenhagen psychosocial questionnaire (CoPsoQ) on two occasions, 1.5 years apart. Initially, 25 office workers (11 men and 14 women) participated, while 14 of those workers (8 women and 6 men) participated in the second assessment together with 32 field workers. The sewage, water treatment and maintenance workers, totaling 32 men, also participated in a field ergonomics assessment using the Washington State Department of Labor and Industries field work ergonomic checklist. Results. The longitudinal outlook was fairly stable, with sustained severe scores in many CoPsoQ subscales and intensification of severity of workers' control over work and esteem for men. A significantly higher esteem score resulted for field rather than office workers. Workers subjected to foul odors showed similar severity of psychosocial factors. Discussion. For most psychosocial dimensions, the organizational design and management system in place, as well as the overall cultural environment in which it operates, create a much stronger and more decisive impact than job-specific factors.
The stingless bees are among the most abundant and ecologically important social invertebrates in tropical communities. The Neotropical stingless bee Melipona quadrifasciata has two subspecies: M. ...quadrifasciata quadrifasciata and M. quadrifasciata anthidioides. The main difference between subspecies are the yellow metassomal stripes, which are continuous in M. q. quadrifasciata and discontinuous in M. q. anthidioides. Recently, two populations were described with continuous stripes and inhabiting clearly disjunct areas in relation to M. q. quadrifasciata. We sequenced 852 bp of the mtDNA COI gene from 145 colonies from 56 localities, and for the first time performed a detailed phylogeographic study of a neotropical stingless bee. Phylogenetic analyses revealed the existence of two clades exhibiting a south to north distribution: southern populations comprise the subspecies M. q. quadrifasciata, and northern populations are composed of M. q. anthidioides and two disjunct populations with continuous stripes. The divergence time of these two phylogroups was estimated between 0.233 and 0.840 million years ago in the Pleistocene, a period of climatic changes and geomorphological alterations in the Neotropical region. No evidence of genetic structure in relation to the tergal stripes was found, indicating that the morphological trait regarding the pattern of stripes on tergites is not an accurate diagnostic for the subspecies of M. quadrifasciata.
Office workers are increasingly exposed to physical and psychosocial risk factors.
To assess the association between environmental, physical and organizational working conditions and the physical and ...psychosocial well-being of a sample of private sector office workers.
Musculoskeletal pain was collected from a body map and the Disabilities of the Arms, Shoulders and Hands questionnaire. The short version of the Copenhagen Psychosocial Questionnaire enabled collecting information on six job related satisfaction and dissatisfaction subscales. A checklist for ergonomics in computer work guided the analysis of ergonomic factors and measurements were taken to characterize environmental conditions. Association between exposures and outcomes was calculated using IBM SPSS Statistics 20 software.
Significant moderate positive association was found between dissatisfaction with job psychological demands and musculoskeletal pain in the upper body (0.40; p= 0.05), as well as between postural ergonomic mismatches and dissatisfaction with job insecurity towards the future (0.42; p= 0.04). A significant moderate negative association (-0,47; p= 0.02) was found as well between satisfaction with job social support and with leadership quality and location of the work station in an open-plan office as opposed to smaller office rooms.
The results show how raising awareness of the risk factors encountered in contemporary office work is still necessary to promote widespread improvement of working conditions, from both a physical and a psychosocial perspective.
To evaluate the usefulness of the mandibular cortical index (MCI) obtained by digital panoramic radiography (DPR) and by panoramic reconstruction (PR) of cone-beam CT (CBCT) with three different ...slice thicknesses for the screening of low bone mineral density (BMD) in post-menopausal women.
Two trained oral and maxillofacial radiologists assessed the MCI based on the morphology of the mandibular bone cortex (classified as C1, C2 or C3). The DPR and PR of CBCT with slice thicknesses of 5, 15 or 25 mm were compared to the BMD obtained by dual-energy X-ray absorptiometry (DXA) in post-menopausal women. Measures related to accuracy were calculated with MedCalc software. The confidence interval was set at 95%.
54 women (mean age 58.70 ± 7.35 years) participated in the study. The sensitivity and specificity values obtained for DPR were 52.6% and 56.2%, respectively, and values for PR of CBCT with 5, 15, and 25 mm slice thicknesses were 63.1% and 43.7%, 50.0% and 50.0%, and 52.6% and 62.5%, respectively. For the tools evaluated, the positive likelihood ratio ranged from 1.00 to 1.40 and negative likelihood ratio from 0.76 to 1.00. The positive predictive value (PPV) ranged from 70.4 to 76.9% and the negative predictive value (NPV) from 29.6 to 35.7%. Among the examinations, the highest value for area under the curve (AUC) was obtained for CBCT with 25 mm slice thickness (57.6%).
The MCI calculated by DPR and CBCT differed with regard to accuracy. Within the limitations of this study, the PR of CBCT with 25 mm slice thicknesses seems to be the most accurate among the examinations evaluated. Should the dentist be attentive, DPR and CBCT may be useful tools for the screening of low BMD in post-menopausal women, facilitating their timely referral for further assessment.
PDF
