Elementary processes associated with ionization of liquid water provide a framework for understanding radiation-matter interactions in chemistry and biology. Although numerous studies have been ...conducted on the dynamics of the hydrated electron, its partner arising from ionization of liquid water, H
O
, remains elusive. We used tunable femtosecond soft x-ray pulses from an x-ray free electron laser to reveal the dynamics of the valence hole created by strong-field ionization and to track the primary proton transfer reaction giving rise to the formation of OH. The isolated resonance associated with the valence hole (H
O
/OH) enabled straightforward detection. Molecular dynamics simulations revealed that the x-ray spectra are sensitive to structural dynamics at the ionization site. We found signatures of hydrated-electron dynamics in the x-ray spectrum.
CsV3 Sb5 is a newly discovered Z2 topological kagome metal showing the coexistence of a charge-density-wave (CDW)-like order at T* = 94 K and superconductivity (SC) at Tc = 2.5 K at ambient pressure. ...Here, we study the interplay between CDW and SC in CsV3 Sb5 via measurements of resistivity, dc and ac magnetic susceptibility under various pressures up to 6.6 GPa. We find that the CDW transition decreases with pressure and experience a subtle modification at Pc1 ≈ 0.6 – 0.9 GPa before it vanishes completely at Pc2 ≈ 2 GPa . Correspondingly, Tc(P) displays an unusual M -shaped double dome with two maxima around Pc1 and Pc2 , respectively, leading to a tripled enhancement of Tc to about 8 K at 2 GPa. The obtained temperature-pressure phase diagram resembles those of unconventional superconductors, illustrating an intimated competition between CDW-like order and SC. The competition is found to be particularly strong for the intermediate pressure range Pc1 ≤ P ≤ Pc2 as evidenced by the broad superconducting transition and reduced superconducting volume fraction. The modification of CDW order around Pc1 has been discussed based on the band structure calculations. This work not only demonstrates the potential to raise Tc of the V-based kagome superconductors, but also offers more insights into the rich physics related to the electron correlations in this novel family of topological kagome metals.
Abstract
The electronic instabilities in CsV
3
Sb
5
are believed to originate from the V 3
d
-electrons on the kagome plane, however the role of Sb 5
p
-electrons for 3-dimensional orders is largely ...unexplored. Here, using resonant tender X-ray scattering and high-pressure X-ray scattering, we report a rare realization of conjoined charge density waves (CDWs) in CsV
3
Sb
5
, where a 2 × 2 × 1 CDW in the kagome sublattice and a Sb 5
p
-electron assisted 2 × 2 × 2 CDW coexist. At ambient pressure, we discover a resonant enhancement on Sb
L
1
-edge (2
s
→5
p
) at the 2 × 2 × 2 CDW wavevectors. The resonance, however, is absent at the 2 × 2 × 1 CDW wavevectors. Applying hydrostatic pressure, CDW transition temperatures are separated, where the 2 × 2 × 2 CDW emerges 4 K above the 2 × 2 × 1 CDW at 1 GPa. These observations demonstrate that symmetry-breaking phases in CsV
3
Sb
5
go beyond the minimal framework of kagome electronic bands near van Hove filling.
We report on measurements of the all-particle cosmic ray energy spectrum and composition in the PeV to EeV energy range using 3 years of data from the IceCube Neutrino Observatory. The IceTop ...detector measures cosmic ray induced air showers on the surface of the ice, from which the energy spectrum of cosmic rays is determined by making additional assumptions about the mass composition. A separate measurement is performed when IceTop data are analyzed in coincidence with the high-energy muon energy loss information from the deep in-ice IceCube detector. In this measurement, both the spectrum and the mass composition of the primary cosmic rays are simultaneously reconstructed using a neural network trained on observables from both detectors. The performance and relative advantages of these two distinct analyses are discussed, including the systematic uncertainties and the dependence on the hadronic interaction models, and both all-particle spectra as well as individual spectra for elemental groups are presented.
CuO/graphene composite is synthesized from CuO and graphene oxide sheets following reduced by hydrazine vapor. As the electrode material for lithium-ion batteries, CuO nanoparticles with sizes of ...about 30nm homogeneously locate on graphene sheets, and act as spacers to effectively prevent the agglomeration of graphene sheets, keeping their high active surface. In turn, the graphene sheets with good electrical conductivity server as a conducting network for fast electron transfer between the active materials and charge collector, as well as buffered spaces to accommodate the volume expansion/contraction during discharge/charge process. The synergetic effect is beneficial for the electrochemical performances of CuO/graphene composite, such as improved initial coulombic efficiency (68.7%) and reversible capacity of 583.5mAhg−1 with 75.5% retention of the reversible capacity after 50 cycles.
We report a simple self-assembled synthesis of hierarchical CuO particles with various morphologies such as leaf, shuttle, flower, dandelion, and caddice clew. The morphologies can be easily tailored ...by adjusting the pH value. The synthesis is based on dehydration and re-crystallization of precursor Cu(OH)
2 nanowires. Cu(NH
3)
4
2+ and OH
− in the solutions are considered as the key factors to influence the assembling manner of CuO. The obtained hierarchical CuO particles serve as a good model system for the study as anodes for lithium ion batteries. Various morphologies of CuO particles result in different electrochemical performances of electrodes. Compared to others, dandelion-like and caddice clew-like CuO exhibit reversible discharge capacities of 385
mAh
g
−1 and 400
mAh
g
−1 at 0.1
C, 340
mAh
g
−1 and 374
mAh
g
−1 at 0.5
C after 50 cycles, respectively. The higher discharge capacities and better cycling performances are attributed to their larger surface area and porosity, leading to better contact between CuO and electrolyte and shorter diffusion length of lithium ions.
Relatively small hysteresis in voltage, appropriate electromotive force and low average delithiation voltage make MnO, among many transition metal oxides. MnO/reduced graphene oxide sheet (MnO/RGOS) ...hybrid is synthesized by a two-step electrode design consisting of liquid phase deposition of MnCO3 nanoparticles on the surface of graphene oxide sheets followed by heat treatment in flowing nitrogen. As an anode for Li-ion batteries, the MnO/RGOS hybrid electrode shows a reversible capacity of 665.5 mA h g−1 after 50 cycles at a current density of 100 mA g−1 and delivers 454.2 mA h g−1 at a rate of 400 mA g−1, which is obviously better than that of bare MnO electrode. Those reasons for such enhanced electrochemical properties are investigated by galvanostatic intermittent titration technique (GITT) as well as electrochemical impedance spectroscopy (EIS). The probable origins, in the term of thermodynamic and kinetic factors, for the marked hysteresis in voltage observed between charge and discharge are also discussed.
► MnO/RGOS hybrid is synthesized by a two-step electrode design. ► As an anode material, it displays superior lithium storage performance. ► Reasons for such enhanced performance are investigated by TEM, GITT and EIS. ► The probable origins of hysteresis in voltage are discussed.
We report the first results of the LISA Pathfinder in-flight experiment. The results demonstrate that two free-falling reference test masses, such as those needed for a space-based gravitational wave ...observatory like LISA, can be put in free fall with a relative acceleration noise with a square root of the power spectral density of 5.2 +/- 0.1 fm s(exp -2)/square root of Hz, or (0.54 +/- 0.01) x 10(exp -15) g/square root of Hz, with g the standard gravity, for frequencies between 0.7 and 20 mHz. This value is lower than the LISA Pathfinder requirement by more than a factor 5 and within a factor 1.25 of the requirement for the LISA mission, and is compatible with Brownian noise from viscous damping due to the residual gas surrounding the test masses. Above 60 mHz the acceleration noise is dominated by interferometer displacement readout noise at a level of (34.8 +/- 0.3) fm square root of Hz, about 2 orders of magnitude better than requirements. At f less than or equal to 0.5 mHz we observe a low-frequency tail that stays below 12 fm s(exp -2)/square root of Hz down to 0.1 mHz. This performance would allow for a space-based gravitational wave observatory with a sensitivity close to what was originally foreseen for LISA.
Porous tin-based films are electrodeposited on copper foils from a choline chloride/ethylene glycol based electrolyte containing SnCl2·2H2O without any complexing agent or additive. Increasing the ...deposition time and voltage produces thicker films. The initially deposited Sn grains are relatively uniform with an average size of 200–300 nm and a kind of self-assembly distribution constructing an open and bicontinuous porous network. The architecture of these films possesses a double-layer structure, i.e. SnO2 (superficial layer)/Sn–Cu alloy (bottom layer), which is revealed by X-ray diffractometer and X-ray photoelectron spectroscopy. The electrochemical performance of the porous tin-based films as anode for lithium-ion batteries is measured. Although the capacity fades gradually with repeated cycling, a reversible capacity of 300-350 mAh g−1 is maintained for more than 50 cycles, which suggests that the in situ formed Sn--Cu alloy could provide an interlocking interface between active materials and current collector. Therefore, the tin's shedding from the current collector can be restrained. Moreover, the inactive materials, such as the oxide in the superficial layer and the Cu in the bottom layer, could also act as buffers to relieve the induced volume expansion of Sn during the repeated lithiathion/delithiation process, thus giving the good cycle performances.
Display omitted
► Porous tin-based film with double-layer structure, i.e. SnO2/Sn–Cu. ► Tin-based film electrodeposited from Ethaline based electrolyte. ► Self-assembly distribution constructing an open and bicontinuous porous Sn network. ► Double-layer tin-based film delivering a satisfactory Li ion storage capacity.
•MnCo2O4 nanowire array is prepared by a fast and facile hydrothermal method.•MnCo2O4 nanowire array exhibits noticeable pseudocapacitive properties.•The as-prepared nanowire array is also a ...promising material for Li-ion batteries.
One-dimension MnCo2O4 nanowire arrays are synthesized on nickel foam by a facile hydrothermal method. The MnCo2O4 nanowires are highly crystalline with an average diameter of 70nm and exhibit excellent properties for electrochemical energy storage. Impressively, the MnCo2O4 nanowire array exhibits noticeable pseudocapacitive performance with a high capacitance of 349.8 F g−1 at 1 A g−1 and 328.9 F g−1 at 20 A g−1 as well as excellent cycling stability. As an anode material for Li-ion batteries, the MnCo2O4 nanowire array delivers an initial specific discharge capacity of 1288.6 mAh g−1 at 100mAg−1, with reversible capacity retention of 92.7% after 50 cycles. The outstanding electrochemical performances are mainly attributed to its nanowire array architecture which provides large reaction surface area, fast ion and electron transfer and good structure stability.
PDF
