The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating (CLFV) conversion of a negative muon into an electron in the field of an aluminum nucleus, with a distinctive ...signature of a monoenergetic electron of energy slightly below the muon rest mass (104.967 MeV). The Mu2e goal is to improve by four orders of magnitude the search sensitivity with respect to the previous experiments. Any observation of a CLFV signal will be a clear indication of new physics. The Mu2e detector is composed of a tracker, an electromagnetic calorimeter, and an external veto for cosmic rays surrounding the solenoid. The calorimeter plays an important role in providing particle identification capabilities, a fast online trigger filter, a seed for track reconstruction while working in vacuum, in the presence of 1-T axial magnetic field and in a harsh radiation environment. The calorimeter requirements are to provide a large acceptance for 100-MeV electrons and reach at these energies: 1) a time resolution better than 0.5 ns; 2) an energy resolution <10%; and 3) a position resolution of 1 cm. The calorimeter design consists of two disks, each one made of 674-undoped cesium iodine crystals read by two large area arrays of UV-extended silicon photomultipliers (SiPMs). We report here the construction and the test of the Module-0 prototype. The Module-0 has been exposed to an electron beam in the energy range around 100 MeV at the Beam Test Facility in Frascati. Preliminary results of timing and energy resolution at normal incidence are shown. A discussion of the technical aspects of the calorimeter engineering is also reported in this paper.
The Mu2e experiment is constructing a calorimeter consisting of 1348 undoped cesium iodide (CsI) crystals in two disks. Each crystal has a dimension of 34 × 34 × 200 mm3 and is readout by a ...large-area silicon photomultipliers array. A series of technical specifications on mechanical and optical parameters was defined according to the calorimeter physics requirements. Preproduction CsI crystals were procured from three firms: Amcrys, Saint-Gobain, and Shanghai Institute of Ceramics. We report the quality assurance on crystal's scintillation properties and their radiation hardness against ionization dose and neutrons. With a fast decay time of about 30 ns and a light output of more than 100 p.e./MeV measured by a bialkali photomultiplier tube, undoped CsI crystals provide a cost-effective solution for Mu2e.
The Mu2e experiment at Fermilab will search for the charged lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of an aluminum nucleus <xref ...ref-type="bibr" rid="ref1">1 , <xref ref-type="bibr" rid="ref2">2 . The Mu2e detector is comprised of a tracker, an electromagnetic calorimeter, and an external veto for cosmic rays. The calorimeter plays an important role in providing excellent particle identification capabilities, a fast and online trigger filter while aiding the track reconstruction capabilities. The calorimeter requirements are to provide a large acceptance for 100-MeV electrons and reach: 1) a time resolution better than 0.5 ns at 100 MeV; 2) an energy resolution O(10%) at 100 MeV; and 3) a position resolution of about 1 cm. The calorimeter consists of two disks, each one made of 674 pure CsI crystals readout by two large-area <inline-formula> <tex-math notation="LaTeX">2 \times 3 </tex-math></inline-formula> array of UV-extended silicon photomultipliers (Mu2e SiPMs) of <inline-formula> <tex-math notation="LaTeX">6\,\,\times6 </tex-math></inline-formula> mm 2 dimensions. A large-scale prototype has been constructed with 51 preproduction crystals readout by 102 Mu2e SiPMs. It has been tested at the beam test facility in Frascati, demonstrating satisfying results compared to the Mu2e requirements. At the moment of writing, the crystals production phase is halfway through the work, while the SiPM production has been completed. An overview of the characterization tests is also reported, together with a description of the final calorimeter design.
Mu2e will search for the Charge Lepton Flavor Violating (CLFV) conversion of a muon into an electron in the field of a nucleus. A clean discovery signature is provided by the mono-energetic ...conversion electron (
E
e
= 104.96 MeV). If no events are observed, Mu2e will set a limit on the ratio between the conversion and the nuclear capture rate below 3 × 10
−17
(at 90% C.L.). In order to confirm that the observed candidate is an electron, the calorimeter resolution requirements are to provide
E
res
< 10%,
T
res
< 500 ps for 100 MeV electrons while working in vacuum and in a high radiation environment and high magnetic field. The calorimeter is made of two annular aluminum disks, each one filled with 674 pure CsI crystals read out by SiPMs. A sophisticated mechanics and cooling system has been developed to support the crystals and cool the sensors. Radiation hard analog and fast digital electronics have been developed. In this paper the QC tests performed on the produced components and the construction status are reported, as well as the results obtained on the large size prototype with test beam data and at a cosmic ray test stand.
The Mu2e experiment at Fermilab searches for the charged-lepton flavor violating neutrino-less conversion of a negative muon into an electron in the field of an aluminum nucleus. The dynamics of such ...a process is well modeled by a two-body decay, resulting in a monoenergetic electron with an energy slightly below the muon rest mass (104.967 MeV). The calorimeter of this experiment plays an important role to provide excellent particle identification capabilities and an online trigger filter while aiding the track reconstruction capabilities. The baseline calorimeter configuration consists of two disks each made with ∼ 700 undoped CsI crystals read out by two large area UV-extended Silicon Photomultipliers. These crystals match the requirements for stability of response, high resolution and radiation hardness. In this paper we present the final calorimeter design.
The Calorimeter of the Mu2e experiment is a complicated detector made of crystal scintillators with dedicated read-out electronics per crystals. The compactness of the Front-End Units matrix, the ...complexity of the necessary services, and the limited space available after detector installation in the experimental hall make access, manipulation and maintenance of the Front-End Units very hard. This paper reports on the conceptual mechanical design of a robotic arm composed of a gantry structure for xyz positioning on the desired Front-End Unit and equipped with custom-designed grippers to perform the necessary maintenance operations. This includes the optimization of the Front-End Units cables routing.
PDF
