The Belle II experiment at the Super B factory SuperKEKB, an asymmetric e+e− collider located in Tsukuba, Japan, is tailored to perform precision B physics measurements. The centre of mass energy of ...the collisions is equal to the rest mass of the ϒ(4S) resonance of mϒ(4S) = 10.58 GeV. A high vertex resolution is essential for measuring the decay vertices of B mesons. Typical momenta of the decay products are ranging from a few tens of MeV to a few GeV and multiple scattering has a significant impact on the vertex resolution. The VerteX Detector (VXD) for Belle II is therefore designed to have as little material as possible inside the acceptance region. Especially the innermost two layers, populated by the PiXel Detector (PXD), have to be ultra-thin. The PXD is based on DEpleted P-channel Field Effect Transistors (DEPFETs) with a thickness of only 75 μm. Spatial resolution and hit efficiency of production detector modules were studied in beam tests performed at the DESY test beam facility. The spatial resolution was investigated as a function of the incidence angle and improvements due to charge sharing are demonstrated. The measured module performance is compatible with the requirements for Belle II.
Radiation length imaging with high-resolution telescopes Stolzenberg, U.; Frey, A.; Schwenker, B. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
02/2017, Letnik:
845
Journal Article
Recenzirano
The construction of low mass vertex detectors with a high level of system integration is of great interest for next generation collider experiments. Radiation length images with a sufficient spatial ...resolution can be used to measure and disentangle complex radiation length X/X0 profiles and contribute to the understanding of vertex detector systems. Test beam experiments with multi GeV particle beams and high-resolution tracking telescopes provide an opportunity to obtain precise 2D images of the radiation length of thin planar objects. At the heart of the X/X0 imaging is a spatially resolved measurement of the scattering angles of particles traversing the object under study. The main challenges are the alignment of the reference telescope and the calibration of its angular resolution. In order to demonstrate the capabilities of X/X0 imaging, a test beam experiment has been conducted. The devices under test were two mechanical prototype modules of the Belle II vertex detector. A data sample of 100 million tracks at 4GeV has been collected, which is sufficient to resolve complex material profiles on the 30μm scale.
•A radiation length imaging method is presented.•Based on local scattering angle reconstruction with high resolution telescopes.•Calibration measurement on reference target to measure angle resolution.•Measurement of material budget for tracking detectors.
Operational experience of the Belle II pixel detector Wang, B.; Abudinen, F.; Ackermann, K. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
06/2022, Letnik:
1032
Journal Article
Recenzirano
Odprti dostop
The Belle II experiment at the SuperKEKB accelerator has started its physics data taking with the full detector setup in March 2019. It aims to collect 40 times more e+e− collision data compared with ...its predecessor Belle experiment. The Belle II pixel detector (PXD) is based on the Depleted P-channel Field Effect Transistor (DEPFET) technology. The PXD plays an important role in the tracking and vertexing of the Belle II detector. Its two layers are arranged at radii of 14 mm and 22 mm around the interaction point. The sensors are thinned down to 75 μm to minimize multiple scattering, and each module has interconnects and ASICs integrated on the sensor with silicon frames for mechanical support. PXD showed good performance during data taking. It also faces several operational challenges due to the high background level from the SuperKEKB accelerator, such as the damage from beam loss events, the drift in the HV working point due to radiation effect, and the impact of the high background.
Commissioning and performance of the Belle II pixel detector Ye, H.; Abudinen, F.; Ackermann, K. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
01/2021, Letnik:
987
Journal Article
Recenzirano
The Belle II experiment at the SuperKEKB energy-asymmetric e+e− collider has completed a series of substantial upgrades and started collecting data in 2019. The experiment is expected to accumulate a ...data set of 50 ab−1 to explore new physics beyond the Standard Model at the intensity frontier. The pixel detector (PXD) of Belle II plays a key role in vertex determination. It has been developed using the DEpleted P-channel Field Effect Transistor (DEPFET) technology, which combines low power consumption in the active pixel area and low intrinsic noise with a very small material budget. In this paper, commissioning and performance of the PXD measured with first collision data are presented.
Belle II pixel detector: Performance of final DEPFET modules Paschen, B.; Abudinen, F.; Ahlburg, P. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
04/2020, Letnik:
958
Journal Article
Recenzirano
A DEpleted P-channel Field Effect Transistor (DEPFET) based pixel detector was developed for the Belle II VerteX Detector (VXD). It is designed to achieve a good impact parameter resolution better ...than 15μm at the very high luminosity conditions of this experiment. In the first half of 2018 four final production modules have been deployed in the commissioning run of the detector and their performance is discussed.
•Four final type Belle II pixel detector modules operated during Belle II phase 2.•Continuous adjustments of field effect transistor gate voltages due to radiation.•Stable performance with hit efficiencies ¿ 97%.
DEPFET pixel detector in the Belle II experiment Abudinen, F.; Ackermann, K.; Albalawi, M. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2019, Letnik:
936
Journal Article
Recenzirano
The Belle II experiment will run with a reduced beam asymmetry and a factor of 40 higher instantaneous luminosity compared to the Belle experiment. To cope with this and to be able to perform high ...precision vertex measurements for charge conjugation parity violating processes, a pixel detector based on DEPFET technology will be installed in the center of Belle II. Its basic properties and the DAQ chain are presented in this article.
•The Belle II experiment will achieve a 40 times higher luminosity compared to Belle.•To study CP violating processes, Belle II is equipped with a pixel detector.•The pixel detector is based on DEPFET technology with a read out frequency of 30 kHz.•Online data reduction is performed by removing background hits during DAQ.•The goal is a data reduction by a factor of ten for full luminosity.
The Belle II experiment at the Super B factory SuperKEKB, an asymmetric \(e^+e^-\) collider located in Tsukuba, Japan, is tailored to perform precision B physics measurements. The centre of mass ...energy of the collisions is equal to the rest mass of the \(\Upsilon(4S)\) resonance of \(m_{\Upsilon(4S)} = 10.58\,\rm GeV\). A high vertex resolution is essential for measuring the decay vertices of B mesons. Typical momenta of the decay products are ranging from a few tens of MeV to a few GeV and multiple scattering has a significant impact on the vertex resolution. The VerteX Detector (VXD) for Belle II is therefore designed to have as little material as possible inside the acceptance region. Especially the innermost two layers, populated by the PiXel Detector (PXD), have to be ultra-thin. The PXD is based on DEpleted P-channel Field Effect Transistors (DEPFETs) with a thickness of only \(75\,\rm\mu m\). Spatial resolution and hit efficiency of production detector modules were studied in beam tests performed at the DESY test beam facility. The spatial resolution was investigated as a function of the incidence angle and improvements due to charge sharing are demonstrated. The measured module performance is compatible with the requirements for Belle II.
The construction of low mass vertex detectors with a high level of system integration is of great interest for next generation collider experiments. Radiation length images with a sufficient spatial ...resolution can be used to measure and disentangle complex radiation length \(X\)/\(X_0\) profiles and contribute to the understanding of vertex detector systems. Test beam experiments with multi GeV particle beams and high-resolution tracking telescopes provide an opportunity to obtain precise 2D images of the radiation length of thin planar objects. At the heart of the \(X\)/\(X_0\) imaging is a spatially resolved measurement of the scattering angles of particles traversing the object under study. The main challenges are the alignment of the reference telescope and the calibration of its angular resolution. In order to demonstrate the capabilities of \(X\)/\(X_0\) imaging, a test beam experiment has been conducted. The devices under test were two mechanical prototype modules of the Belle II vertex detector. A data sample of 100 million tracks at \(4\, \mathrm{GeV}\) has been collected, which is sufficient to resolve complex material profiles on the \(30\,\mu\)m scale.
EUDAQ is a generic data acquisition software developed for use in conjunction with common beam telescopes at charged particle beam lines. Providing high-precision reference tracks for performance ...studies of new sensors, beam telescopes are essential for the research and development towards future detectors for high-energy physics. As beam time is a highly limited resource, EUDAQ has been designed with reliability and ease-of-use in mind. It enables flexible integration of different independent devices under test via their specific data acquisition systems into a top-level framework. EUDAQ controls all components globally, handles the data flow centrally and synchronises and records the data streams. Over the past decade, EUDAQ has been deployed as part of a wide range of successful test beam campaigns and detector development applications.
PDF