A series of different crystalline phases BiVO4 photocatalysts (tetragonal, monoclinic, and monoclinic/tetragonal heterophase) have been prepared by a coprecipitation and molten salt method. ...High-resolution transmission electron microscopy (HRTEM) results show that an interface of intimate contact is formed in monoclinic/tetragonal heterophase and monoclinic phase is mainly on the surface of nanoparticles. Surface photovoltage (SPV) and transient photovoltage (TPV) techniques are used to further investigate the transfer process of photoinduced charge carriers. The results show that the behavior of photoinduced charges markedly depend on the crystalline phases of BiVO4 samples, and the presence of interface in monoclinic/tetragonal heterophase provides a spatial condition for charge transfer, promotes the separation of photoinduced electron–hole pairs, and changes the migration direction of photoinduced carriers. The relationship between behavior of photoinduced charge carriers and photocatalytic activity was discussed in detail, which would provide a greater insight into the intrinsic reasons of the enhancement in photocatalytic activity.
•GO/Bi2WO6 are readily fabricated by facile bubbling pretreatment and freeze drying.•GO/Bi2WO6 possess excellent photocatalytic activity under visible light irradiation.•The visible light activity of ...GO/Bi2WO6 is affected by the amount of GO.•The photostablity of GO is due to the photo-generated electrons transfer to Bi2WO6.
A facile approach of fabricating homogeneous graphene oxide (GO)-wrapped Bi2WO6 microspheres (GO/Bi2WO6) is developed. The transmission electron microscopy (TEM) results show that a heterojunction interface between GO and Bi2WO6. The UV–vis diffuse reflection spectra (DRS) reveal that the as-prepared GO/Bi2WO6 composites own more intensive absorption in the visible light range compared with pure Bi2WO6. These characteristic structural and optical properties endow GO/Bi2WO6 composites with enhanced photocatalytic activity. The enhanced photocatalytic activity of the GO/Bi2WO6 is attributed predominantly to the synergetic effect between GO and Bi2WO6, causing rapid generation and separation of photo-generated charge carriers.
Non-lamellar lyotropic liquid crystalline (LLC) lipid nanoparticles contain internal multidimensional nanostructures such as the inverse bicontinuous cubic and the inverse hexagonal mesophases, which ...can respond to external stimuli and have the potential of controlling drug release. To date, the internal LLC mesophase responsiveness of these lipid nanoparticles is largely achieved by adding ionizable small molecules to the parent lipid such as monoolein (MO), the mixture of which is then dispersed into nanoparticle suspensions by commercially available poly(ethylene oxide)-poly(propylene oxide) block copolymers. In this study, the Reversible Addition-Fragmentation chain Transfer (RAFT) technique was used to synthesize a series of novel amphiphilic block copolymers (ABCs) containing a hydrophilic poly(ethylene glycol) (PEG) block, a hydrophobic block and one or two responsive blocks, i.e., poly(4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzyl acrylate) (PTBA) and/or poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA). High throughput small angle X-ray scattering studies demonstrated that the synthesized ABCs could simultaneously stabilize a range of LLC MO nanoparticles (vesicles, cubosomes, hexosomes, inverse micelles) and provide internal particle nanostructure responsiveness to changes of hydrogen peroxide (H
O
) concentrations, pH and temperature. It was found that the novel functional ABCs can substitute for the commercial polymer stabilizer and the ionizable additive in the formation of next generation non-lamellar lipid nanoparticles. These novel formulations have the potential to control drug release in the tumor microenvironment with endogenous H
O
and acidic pH conditions.
Lyotropic liquid crystalline nanoparticle dispersions are of interest as delivery vectors for biomedicine. Aqueous dispersions of liposomes, cubosomes, and hexosomes are commonly stabilized by ...nonionic amphiphilic block copolymers to prevent flocculation and phase separation. Pluronic stabilizers such as F127 are commonly used; however, there is increasing interest in using chemically reactive stabilizers for enhanced functionalization and specificity in therapeutic delivery applications. This study has explored the ability of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine conjugated with poly(ethylene glycol) (DSPE-PEGMW) (2000 Da ≤ MW ≤ 5000 Da) to engineer and stabilize phytantriol-based lyotropic liquid crystalline dispersions. The poly(ethylene glycol) (PEG) moiety provides a tunable handle to the headgroup hydrophilicity/hydrophobicity to allow access to a range of nanoarchitectures in these systems. Specifically, it was observed that increasing PEG molecular weight promotes greater interfacial curvature of the dispersions, with liposomes (Lα) present at lower PEG molecular weight (MW 2000 Da), and a propensity for cubosomes (QII P or QII D phase) at MW 3400 Da or 5000 Da. In comparison to Pluronic F127-stabilized cubosomes, those made using DSPE-PEG3400 or DSPE-PEG5000 had enlarged internal water channels. The toxicity of these cubosomes was assessed in vitro using A549 and CHO cell lines, with cubosomes prepared using DSPE-PEG5000 having reduced cytotoxicity relative to their Pluronic F127-stabilized analogues.
Based on the intrinsic electrochemical features of brucine integrated with carbon nanotubes (brucine/SWNTs), dimeric quinoid brucine was electrochemically generated by electroactivation of a ...brucine/SWNTs-modified GC electrode and used as a novel electrocatalyst for efficient electro-oxidation of hydroxylamine (HA). The electrocatalytic activity was investigated with cyclic voltammetry in the range pH 2.0 to pH 11.0, and the best electrocatalytic performance of the electrocatalyst was obtained at pH 10.0. By taking advantage of the electrocatalytic activity of the dimeric quinoid brucine toward HA, we have developed an electrochemical sensor for HA measurements based on a brucine/SWNTS-modified GC electrode using amperometry with the applied potential of + 0.1 V (vs. Ag/AgCl). Under the optimized conditions, the current response toward HA concentration shows a linear relationship in the dynamic ranges of 0.1–10 μM and 10–1000 μM with a detection limit of 0.021 μM based on the 3σ criterion. The sensor was used to assay HA in pharmaceuticals including hydroxyurea tablets and pralidoxime iodide injections with satisfactory results. The spike-and-recovery for samples of tap water (
n
= 9) and lake water (
n
= 9) was within 97.17–100.16%.
Graphical abstract
Schematic illustration of electrochemical sensing of hydroxylamine (HA) enabled by integrating brucine with single-walled carbon nanotube (brucine/SWNTs) based on electro-activation of brucine/SWNTs-modified GC electrode
Understanding the factors that control protein structure and stability at the oil–water interface continues to be a major focus to optimize the formulation of protein-stabilized emulsions. In this ...study, a combination of synchrotron radiation circular dichroism spectroscopy, front-face fluorescence spectroscopy, and dual polarization interferometry (DPI) was used to characterize the conformation and geometric structure of β-lactoglobulin (β-Lg) upon adsorption to two oil–water interfaces: a hexadecane–water interface and a tricaprylin–water interface. The results show that, upon adsorption to both oil–water interfaces, β-Lg went through a β-sheet to α-helix transition with a corresponding loss of its globular tertiary structure. The degree of conformational change was also a function of the oil phase polarity. The hexadecane oil induced a much higher degree of non-native α-helix compared to the tricaprylin oil. In contrast to the β-Lg conformation in solution, the non-native α-helical-rich conformation of β-Lg at the interface was resistant to further conformational change upon heating. DPI measurements suggest that β-Lg formed a thin dense layer at emulsion droplet surfaces. The effects of high temperature and the presence of salt on these β-Lg emulsions were then investigated by monitoring changes in the ζ-potential and particle size. In the absence of salt, high electrostatic repulsion meant β-Lg-stabilized emulsions were resistant to heating to 90 °C. Adding salt (120 mM NaCl) before or after heating led to emulsion flocculation due to the screening of the electrostatic repulsion between colloidal particles. This study has provided insight into the structural properties of proteins adsorbed at the oil–water interface and has implications in the formulation and production of emulsions stabilized by globular proteins.
► Near-monodisperse Zn-doped TiO2 microspheres have been synthesized. ► The photovoltaic properties of the samples were examined by SPS, FISPS and TPV measurements. ► Surface photovoltage results ...revealed Zn doping can promote charge transfer in TiO2 film electrode.
Zn-doped TiO2 microspheres have been synthesized by introducing a trace amount of zinc nitrate hexahydrate to the reaction system. Scanning electron microscope (SEM), field-emission scanning electron microscope (FESEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) have been utilized to characterize the samples. Both surface photovoltage spectroscopy (SPS) technique based on lock-in amplifier and transient photovoltage (TPV) measurement reveal that the slight doping of Zn can promote the separation of photo-generated charges as well as restrain the recombination due to the strong interface built-in electric field and the decreasing of surface trap states. The photovoltaic parameters of dye-sensitized solar cells (DSSCs) based on Zn-doped TiO2 are significantly better, compared to that of a cell based on undoped TiO2. The relation between the performance of DSSCs and their photovoltaic properties is also discussed.
Carbon-doped ZnO microspheres were prepared through a facile hydrothermal process. The characterizations for the physicochemical properties of prepared samples under different calcination ...temperatures were carried out on X-ray diffraction analysis, scanning electron microscopy, X-ray photoelectron spectroscopy, UV–vis diffuse reflectance spectra, Raman spectroscopy and photocurrent spectra. C-doped ZnO under 500
°C calcination exhibited the superior UV-activated room-temperature gas sensing activity for the detection of ethanol. The result of transient photovoltage suggested that the presence of sp
2 carbon-type structures could improve the separation extent and restrain the recombination of the photoinduced electron–hole pairs, which increase the number of photoinduced oxygen ions on the surface of C-doped ZnO and enhancing of gas sensing activity.
pH-responsive nanoparticles enable the selective delivery of a chemotherapeutic agent to tumours while reducing adverse effects. Herein we synthesised four novel aminolipids and developed ...pH-responsive nanostructured lipid nanoparticles (LNP), which exhibited a slow-releasing hexagonal structure (H2) at physiological pH and quick release bicontinuous cubic phase (Q2) at the acidic tumour pH. The nanoparticles were used to encapsulate and control the release of the chemotherapeutic agent SN-38. High-throughput formulation techniques were employed to fabricate LNP by mixing various amounts of aminolipid with monoolein (MO). The effect of aminolipids on MO self-assembled structures was studied using small-angle X-ray scattering (SAXS) at various pH values. Out of the four studied aminolipid-MO LNP systems, the nanoparticles containing N-(Pyridin-4-ylmethyl) oleamide (OAPy-4) or N-(2(piperidin-1yl)ethyl) oleamide (OAPi-1) exhibited a pH-induced H2 to Q2 phase transition in a tumour-relevant pH range (pH 5.5–7.0). SN-38 is 1000 times more efficacious than the commercially available prodrug irinotecan. However, low solubility in water and instability at physiological pH makes it unsuitable for clinical use. SN-38 was loaded into LNP containing MO and aminolipid OAPy-4. The drug loading and entrapment efficiency were determined, and the results indicated that the aqueous solubility of SN-38 loaded in LNP dispersions was ~100 times higher compared to the solubility of the pure drug in aqueous solution. Furthermore, we demonstrated that the in vitro SN-38 release rate from LNPs was faster at lower pH (pH 5) than at neutral pH. Therefore, pH-responsive LNPs developed in this study can potentially be employed in delivering and controlling the release of the potent drug SN-38 to tumour sites.
CdS nanowire/ZnO nanosphere materials (CdS/ZnO) with hierarchical structure were synthesized by a three-step solvothermal process. XRD, FESEM and TEM analysis confirmed the growth of ZnO nanospheres ...on the surface of CdS nanowires (NWs). The transient photovoltage (TPV) measurements revealed that the interface between CdS and ZnO can inhibit the recombination of photogenerated excess carriers and prolong the lifetime of excess carriers in CdS/ZnO materials. Moreover, the CdS/ZnO materials exhibit a dramatic improvement in optoelectronic performance and visible-light-irradiation gas sensing activity, which gave 1 order of magnitude larger than that of CdS NWs in response to formaldehyde. The enhancement of sensing properties is attributed to the interfacial transport of excess carriers.
PDF
