Using high temporal resolution satellite observations and reanalysis data, we classify daily weather into distinct regimes and quantify their associated cloud radiative effect (CRE) to better ...understand the roles of various weather systems in affecting Earth's top‐of‐atmosphere radiation budget. These regimes include non‐precipitation, drizzle, wet non‐storm, and storm days, which encompass atmospheric rivers (AR), tropical storms (TS), and mesoscale convection systems (MCS). We find that precipitation (wet) days account for roughly 80% (60%) of global longwave (LW) and shortwave (SW) CREs due to their large frequency and high intensity in CRE. Despite being rare globally (13%), AR, TS, and MCS days together account for 32% of global LW CRE and 27% of SW CRE due to their higher intensity in LW and SW CRE. These results enhance our understanding of how various weather systems, particularly severe storms, influence Earth's radiative balance, and will help to better constrain climate models.
Plain Language Summary
Using detailed satellite observations and reanalysis data, we categorize daily weather patterns into different types and measure the cloud radiative effects (CRE) associated with each type. The weather patterns we study include non‐precipitation days, drizzle, wet non‐storm days, and storm days, which include events like atmospheric rivers, tropical storms, and mesoscale convective systems. We found that precipitation days, which include both drizzle and wet days, contribute to about 80% of global longwave (LW) and shortwave (SW) CRE due to their high frequency and intensity. Even though storm days are rare globally (only 13%), they collectively contribute to around 32% of global LW CRE and 27% of SW CRE because of their stronger impact on both LW and SW CRE. These findings are important for understanding how different weather systems influence the Earth's radiation balance and will help improve the accuracy of climate models.
Key Points
Cloud radiative effect (CRE) associated with various daily weather regimes including atmospheric rivers (ARs), tropical storms (TSs), and mesoscale convection systems (MCSs) are derived using satellite observations and reanalysis data
Precipitation (wet) days account for roughly 80% (60%) of global longwave (LW) and shortwave (SW) CRE due to their large frequency and high intensity in CRE
Despite their rare occurrence, AR, TS, and MCS days together account for 32% of LW CRE and 27% of SW CRE due to their higher intensity CRE
This study explores connections between process-level modeling of convection and global climate model (GCM) simulated clouds and cloud feedback to global warming through a set of perturbed-physics ...and perturbed sea surface temperature experiments. A bulk diagnostic approach is constructed, and a set of variables is derived and demonstrated to be useful in understanding the simulated relationship. In particular, a novel bulk quantity, the convective precipitation efficiency or equivalently the convective detrainment efficiency, is proposed as a simple measure of the aggregated properties of parameterized convection important to the GCM simulated clouds. As the convective precipitation efficiency increases in the perturbed-physics experiments, both liquid and ice water path decrease, with low and middle cloud fractions diminishing at a faster rate than high cloud fractions. This asymmetry results in a large sensitivity of top-of-atmosphere net cloud radiative forcing to changes in convective precipitation efficiency in this limited set of models.
For global warming experiments, intermodel variations in the response of cloud condensate, low cloud fraction, and total cloud radiative forcing are well explained by model variations in response to total precipitation (or detrainment) efficiency. Despite significant variability, all of the perturbed-physics models produce a sizable increase in precipitation efficiency to warming. A substantial fraction of the increase is due to its convective component, which depends on the parameterization of cumulus mixing and convective microphysical processes. The increase in convective precipitation efficiency and associated change in convective cloud height distribution owing to warming explains the increased cloud feedback and climate sensitivity in recently developed Geophysical Fluid Dynamics Laboratory GCMs. The results imply that a cumulus scheme using fractional removal of condensate for precipitation and inverse calculation of the entrainment rate tends to produce a lower climate sensitivity than a scheme using threshold removal for precipitation and the entrainment rate formulated inversely dependent on convective depth.
Intelligent reflecting surface (IRS) has drawn a lot of attention recently as a promising new solution to achieve high spectral and energy efficiency for future wireless networks. By utilizing ...massive low-cost passive reflecting elements, the wireless propagation environment becomes controllable and thus can be made favorable for improving the communication performance. Prior works on IRS mainly rely on the instantaneous channel state information (I-CSI), which, however, is practically difficult to obtain for IRS-associated links due to its passive operation and large number of reflecting elements. To overcome this difficulty, we propose in this paper a new two-timescale (TTS) transmission protocol to maximize the achievable average sum-rate for an IRS-aided multiuser system under the general correlated Rician channel model. Specifically, the passive IRS phase shifts are first optimized based on the statistical CSI (S-CSI) of all links, which varies much slowly as compared to their I-CSI; while the transmit beamforming/precoding vectors at the access point (AP) are then designed to cater to the I-CSI of the users' effective fading channels with the optimized IRS phase shifts, thus significantly reducing the channel training overhead and passive beamforming design complexity over the existing schemes based on the I-CSI of all channels. Besides, for ease of practical implementation, we consider discrete phase shifts at each reflecting element of the IRS. For the single-user case, an efficient penalty dual decomposition (PDD)-based algorithm is proposed, where the IRS phase shifts are updated in parallel to reduce the computational time. For the multiuser case, we propose a general TTS stochastic successive convex approximation (SSCA) algorithm by constructing a quadratic surrogate of the objective function, which cannot be explicitly expressed in closed-form. Simulation results are presented to validate the effectiveness of our proposed algorithms and evaluate the impact of S-CSI and channel correlation on the system performance.
The complement system is highly activated in primary membranous nephropathy (MN). Identifying the complement components that damage podocytes has important therapeutic implications. This study ...investigated the role of C3a and the C3a receptor (C3aR) in the pathogenesis of MN.
C3aR expression in kidneys and circulating levels of C3a of MN patients were examined. Human podocyte damage was assessed after exposure to MN plasma +/- C3aR blockade (SB290157, JR14a). C3aR antagonists were administered to rats with Heymann nephritis on day 0 or after proteinuria. Clinical and pathologic parameters, specific IgG and complement activation, and podocyte injuries were then assessed.
In the glomeruli, C3aR staining merged well with podocin. Overexpression of C3aR correlated positively with proteinuria, serum creatinine, and no response to treatments. Human podocytes exposed to MN plasma showed increased expression of PLA2R, C3aR, and Wnt3/
-catenin, reduced expression of synaptopodin and migration function, downregulated Bcl-2, and decreased cell viability. C3aR antagonists could block these effects. In Heymann nephritis rats, C3aR blockade attenuated proteinuria, electron-dense deposition, foot process width, and glomerular basement membrane thickening in glomeruli. The increased plasma C3a levels and overexpression of C3aR were also alleviated. Specific, but not total, IgG levels decreased, with less deposition of rat IgG in glomeruli and subsequent reduction of C1q, factor B, and C5b-9.
C3a anaphylatoxin is a crucial effector of complement-mediated podocyte damage in MN. The C3aR antagonist may be a potentially viable treatment for this disease.
This work studies the joint problem of power and trajectory optimization in a rotary-wing unmanned aerial vehicle (UAV)-enabled mobile relaying system. In the considered system, in order to provide ...convenient and sustainable energy supply to the UAV relay, we consider the deployment of a power beacon (PB) which can wirelessly charge the UAV and it is realized by a properly designed laser charging system. To this end, we propose an efficiency (the weighted sum of the energy efficiency during information transmission and wireless power transmission efficiency) maximization problem by optimizing the source/UAV/PB transmit powers along with the UAV's trajectory. This optimization problem is also subject to practical mobility constraints, as well as the information-causality constraint and energy-causality constraint at the UAV. Different from the commonly used alternating optimization (AO) algorithm, two joint design algorithms, namely: the concave-convex procedure (CCCP) and penalty dual decomposition (PDD)-based algorithms, are presented to address the resulting non-convex problem, which features complex objective function with multiple-ratio terms and coupling constraints. These two very different algorithms are both able to achieve a stationary solution of the original efficiency maximization problem. Simulation results validate the effectiveness of the proposed algorithms.
This paper investigates the passive beamforming and deployment design for an intelligent reflecting surface (IRS) aided full-duplex (FD) wireless system, where an FD access point (AP) communicates ...with an uplink (UL) user and a downlink (DL) user simultaneously over the same time-frequency dimension with the help of IRS. Under this setup, we consider three deployment cases: 1) two distributed IRSs placed near the UL user and DL user, respectively; 2) one centralized IRS placed near the DL user; 3) one centralized IRS placed near the UL user. In each case, we aim to minimize the weighted sum transmit power consumption of the AP and UL user by jointly optimizing their transmit power and the passive reflection coefficients at the IRS (or IRSs), subject to the UL and DL users' rate constraints and the uni-modulus constraints on the IRS reflection coefficients. First, we analyze the minimum transmit power required in the IRS-aided FD system under each deployment scheme, and compare it with that of the corresponding half-duplex (HD) system. We show that the FD system outperforms its HD counterpart for all IRS deployment schemes, while the distributed deployment further outperforms the other two centralized deployment schemes. Next, we transform the challenging power minimization problem into an equivalent but more tractable form and propose an efficient algorithm to solve it based on the block coordinate descent (BCD) method. Finally, numerical results are presented to validate our analysis as well as the efficacy of the proposed passive beamforming design.
Intelligent reflecting surface (IRS) is an emerging technology that is able to reconfigure the wireless channel via tunable passive signal reflection and thereby enhance the spectral/energy ...efficiency of wireless networks cost-effectively. In this paper, we study an IRS-aided multiuser multiple-input single-output (MISO) wireless system and adopt the two-timescale (TTS) transmission to reduce the signal processing complexity and channel training overhead as compared to the existing schemes based on the instantaneous channel state information (I-CSI), and at the same time, exploit the multiuser channel diversity in transmission scheduling. Specifically, the long-term passive beamforming (i.e., IRS phase shifts) is designed based on the statistical CSI (S-CSI) of all links, while the short-term active beamforming (i.e., transmit precoding vectors at the access point (AP)) is designed to cater to the I-CSI of all users' reconfigured channels with optimized IRS phase shifts. We aim to minimize the average transmit power at the AP, subject to the users' individual quality of service (QoS) constraints on the achievable long-term average rate. The formulated stochastic optimization problem is non-convex and difficult to solve since the long-term and short-term design variables are complicatedly coupled in the QoS constraints. To tackle this problem, we propose an efficient algorithm, called the primal-dual decomposition based TTS joint active and passive beamforming (PDD-TJAPB), where the original problem is decomposed into a long-term passive beamforming problem and a family of short-term active beamforming problems, and the deep unfolding technique is employed to extract gradient information from the short-term problems to construct a convex surrogate problem for the long-term problem. We show that both the long-term and short-term problems can be efficiently solved and the proposed algorithm is proved to converge to a stationary solution of the original problem almost surely. Simulation results are presented which demonstrate the advantages and effectiveness of the proposed algorithm as compared to benchmark schemes.
Single‐component materials with white‐light emission are ideal for lighting applications. However, it is very challenging to achieve white luminescence in single‐dopant activated solid phosphors. ...Herein, white NaLi3Si1−xO4:Eu2+ materials are designed via defect engineering and synthesized by reducing the Si content (0.15 ≤ x ≤ 0.25). Stochiometric NaLi3SiO4:Eu2+ exhibits a narrow‐band blue emission at 469 nm, ascribed to the 5d → 4f transition of Eu2+ at highly symmetric cuboid Na sites, while samples with Si content reduced by 15–25% display white emission with two peaks at 472 nm and 585 nm. The newly appeared broadband yellow peak arises from charge‐transfer transitions involving Eu2+ and nearby defects, as verified by an unusual bandwidth, a large Stokes shift, and a long decay time. A single‐component white light‐emitting diode device is fabricated by employing a white phosphor to demonstrate a color‐rendering index of 82.9. This result provides a new design strategy for single‐component white‐light materials with broad‐band defect‐induced charge‐transfer emission.
A single‐component white emitter is developed by introducing defect‐associated charge‐transfer emission in a NaLi3SiO4:Eu2+ phosphor via a facile composition modification strategy. An extra broadband yellow peak (585 nm) appears in addition to the narrow‐band blue emission (472 nm). A single‐component white light‐emitting diode with color‐rendering index of 82.9 is fabricated using the white phosphor.
We investigate the effects of AGN feedback on the cosmological evolution of an isolated elliptical galaxy by performing two-dimensional high-resolution hydrodynamical numerical simulations. The inner ...boundary of the simulation is chosen so that the Bondi radius is resolved. Compared to previous works, the two accretion modes-namely, hot and cold, which correspond to different accretion rates and have different radiation and wind outputs-are carefully discriminated, and the feedback effects by radiation and wind in each mode are taken into account. The most updated AGN physics, including the descriptions of radiation and wind from the hot accretion flows and wind from cold accretion disks, are adopted. Physical processes like star formation and SNe Ia and II are taken into account. We study the AGN light curve, typical AGN lifetime, growth of the black hole mass, AGN duty cycle, star formation, and X-ray surface brightness of the galaxy. We compare our simulation results with observations and find general consistency. Comparisons with previous simulation works find significant differences, indicating the importance of AGN physics. The respective roles of radiation and wind feedback are examined, and it is found that they are different for different problems of interest, such as AGN luminosity and star formation. We find that it is hard to neglect any of them, so we suggest using the names "cold feedback mode" and "hot feedback mode" to replace the currently used ones.
Phosphatidylethanolamine (PE) is a major component in the mammalian plasma membrane. It is present mainly in the inner leaflet of the membrane bilayer in a viable, typical mammalian cell. However, ...accumulating evidence indicates that a number of biological events involve PE externalization. For instance, PE is concentrated at the surface of cleavage furrow between mitotic daughter cells and is correlated with the dynamics of contractile ring. In apoptotic cells, PE is exposed to the cell surface, thus providing a molecular marker for detection. In addition, PE is a cofactor in the anticoagulant mechanism, and a distinct distribution profile of PE has been documented at the blood–endothelium interface. These recent discoveries were made possible using PE-specific probes derived from duramycin and cinnamycin, which are members of type B lantibiotics. This review provides an account on the features of these PE-specific lantibiotics in the context of molecular probes for the characterization of PE on a cellular and tissue level. According to the existing data, PE is likely a versatile chemical species that plays a role in the regulation of defined biological and physiological activities. The utilities of lantibiotic-based molecular probes will help accelerate the characterization of PE as an abundant, yet elusive membrane component.
PDF
