Remote observations of the asteroid (1) Ceres from ground- and space-based telescopes have provided its approximate density and shape, leading to a range of models for the interior of Ceres, from ...homogeneous to fully differentiated. A previously missing parameter that can place a strong constraint on the interior of Ceres is its moment of inertia, which requires the measurement of its gravitational variation together with either precession rate or a validated assumption of hydrostatic equilibrium. However, Earth-based remote observations cannot measure gravity variations and the magnitude of the precession rate is too small to be detected. Here we report gravity and shape measurements of Ceres obtained from the Dawn spacecraft, showing that it is in hydrostatic equilibrium with its inferred normalized mean moment of inertia of 0.37. These data show that Ceres is a partially differentiated body, with a rocky core overlaid by a volatile-rich shell, as predicted in some studies. Furthermore, we show that the gravity signal is strongly suppressed compared to that predicted by the topographic variation. This indicates that Ceres is isostatically compensated, such that topographic highs are supported by displacement of a denser interior. In contrast to the asteroid (4) Vesta, this strong compensation points to the presence of a lower-viscosity layer at depth, probably reflecting a thermal rather than compositional gradient. To further investigate the interior structure, we assume a two-layer model for the interior of Ceres with a core density of 2,460-2,900 kilograms per cubic metre (that is, composed of CI and CM chondrites), which yields an outer-shell thickness of 70-190 kilometres. The density of this outer shell is 1,680-1,950 kilograms per cubic metre, indicating a mixture of volatiles and denser materials such as silicates and salts. Although the gravity and shape data confirm that the interior of Ceres evolved thermally, its partially differentiated interior indicates an evolution more complex than has been envisioned for mid-sized (less than 1,000 kilometres across) ice-rich rocky bodies.
► We model the illumination conditions in the polar regions with LOLA topography. ► Long simulations (several decades) are used to obtain average illumination maps. ► Permanently shadowed regions and ...sites of maximum illumination are characterized. ► We assess the single-scattering environment in those permanently shadowed regions. ► Small height gains above the surface can greatly decrease the “night” durations.
We use high-resolution altimetry data obtained by the Lunar Orbiter Laser Altimeter instrument onboard the Lunar Reconnaissance Orbiter to characterize present illumination conditions in the polar regions of the Moon. Compared to previous studies, both the spatial and temporal extent of the simulations are increased significantly, as well as the coverage (fill ratio) of the topographic maps used, thanks to the 28
Hz firing rate of the five-beam instrument. We determine the horizon elevation in a number of directions based on 240
m-resolution polar digital elevation models reaching down to ∼75° latitude. The illumination of both polar regions extending to ∼80° can be calculated for any geometry from those horizon longitudinal profiles. We validated our modeling with recent Lunar Reconnaissance Orbiter Wide-Angle Camera images. We assessed the extent of permanently shadowed regions (PSRs, defined as areas that never receive direct solar illumination), and obtained total areas generally larger than previous studies (12,866 and 16,055
km
2, in the north and south respectively). We extended our direct illumination model to account for singly-scattered light, and found that every PSR does receive some amount of scattered light during the year. We conducted simulations over long periods (several 18.6-years lunar precession cycles) with a high temporal resolution (6
h), and identified the most illuminated locations in the vicinity of both poles. Because of the importance of those sites for exploration and engineering considerations, we characterized their illumination more precisely over the near future. Every year, a location near the Shackleton crater rim in the south polar region is sunlit continuously for 240
days, and its longest continuous period in total darkness is about 1.5
days. For some locations small height gains (∼10
m) can dramatically improve their average illumination and reduce the night duration, rendering some of those particularly attractive energy-wise as possible sites for near-continuous sources of solar power.
The lunar cratering record is used to constrain the bombardment history of both the Earth and the Moon. However, it is suggested from different perspectives, including impact crater dating, asteroid ...dynamics, lunar samples, impact basin-forming simulations, and lunar evolution modelling, that the Moon could be missing evidence of its earliest cratering record. Here we report that impact basins formed during the lunar magma ocean solidification should have produced different crater morphologies in comparison to later epochs. A low viscosity layer, mimicking a melt layer, between the crust and mantle could cause the entire impact basin size range to be susceptible to immediate and extreme crustal relaxation forming almost unidentifiable topographic and crustal thickness signatures. Lunar basins formed while the lunar magma ocean was still solidifying may escape detection, which is agreeing with studies that suggest a higher impact flux than previously thought in the earliest epoch of Earth-Moon evolution.
On 6 March 2015, Dawn arrived at Ceres to find a dark, desiccated surface punctuated by small, bright areas. Parts of Ceres' surface are heavily cratered, but the largest expected craters are absent. ...Ceres appears gravitationally relaxed at only the longest wavelengths, implying a mechanically strong lithosphere with a weaker deep interior. Ceres' dry exterior displays hydroxylated silicates, including ammoniated clays of endogenous origin. The possibility of abundant volatiles at depth is supported by geomorphologie features such as flat crater floors with pits, lobate flows of materials, and a singular mountain that appears to be an extrusive cryovolcanic dome. On one occasion, Ceres temporarily interacted with the solar wind, producing a bow shock accelerating electrons to energies of tens of kilovolts.
We present an improved lunar digital elevation model (DEM) covering latitudes within plus or minus 60 degree , at a horizontal resolution of 512pixels per degree (60m at the equator) and a typical ...vertical accuracy 3 to 4m. This DEM is constructed from geodetically-accurate topographic heights from the Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter, to which we co-registered 43,200 stereo-derived DEMs (each ) from the SELENE Terrain Camera (TC) (1010 pixels total). After co-registration, approximately 90% of the TC DEMs show root-mean-square vertical residuals with the LOLA data of <5m compared to 50% prior to co-registration. We use the co-registered TC data to estimate and correct orbital and pointing geolocation errors from the LOLA altimetric profiles (typically amounting to <10m horizontally and <1m vertically). By combining both co-registered datasets, we obtain a near-global DEM with high geodetic accuracy, and without the need for surface interpolation. We evaluate the resulting LOLA+TC merged DEM (designated as "SLDEM2015") with particular attention to quantifying seams and crossover errors.
Dawn at Vesta: Testing the Protoplanetary Paradigm Russell, C. T.; Raymond, C. A.; Coradini, A. ...
Science (American Association for the Advancement of Science),
05/2012, Letnik:
336, Številka:
6082
Journal Article
Recenzirano
The Dawn spacecraft targeted 4 Vesta, believed to be a remnant intact protoplanet from the earliest epoch of solar system formation, based on analyses of howardite-eucrite-diogenite (HED) meteorites ...that indicate a differentiated parent body. Dawn observations reveal a giant basin at Vesta's south pole, whose excavation was sufficient to produce Vesta-family asteroids (Vestoids) and HED meteorites. The spatially resolved mineralogy of the surface reflects the composition of the HED meteorites, confirming the formation of Vesta's crust by melting of a chondritic parent body. Vesta's mass, volume, and gravitational field are consistent with a core having an average radius of 107 to 113 kilometers, indicating sufficient internal melting to segregate iron. Dawn's results confirm predictions that Vesta differentiated and support its identification as the parent body of the HEDs.
Mars Orbiter Laser Altimeter (MOLA) topography and gravity models from 5 years of Mars Global Surveyor (MGS) spacecraft tracking provide a window into the structure of the Martian crust and upper ...mantle. We apply a finite-amplitude terrain correction assuming uniform crustal density and additional corrections for the anomalous densities of the polar caps, the major volcanos, and the hydrostatic flattening of the core. A nonlinear inversion for Moho relief yields a crustal thickness model that obeys a plausible power law and resolves features as small as 300 km wavelength. On the basis of petrological and geophysical constraints, we invoke a mantle density contrast of 600 kg m-3; with this assumption, the Isidis and Hellas gravity anomalies constrain the global mean crustal thickness to be >45 km. The crust is characterized by a degree 1 structure that is several times larger than any higher degree harmonic component, representing the geophysical manifestation of the planet's hemispheric dichotomy. It corresponds to a distinction between modal crustal thicknesses of 32 km and 58 km in the northern and southern hemispheres, respectively. The Tharsis rise and Hellas annulus represent the strongest components in the degree 2 crustal thickness structure. A uniform highland crustal thickness suggests a single mechanism for its formation, with subsequent modification by the Hellas impact, erosion, and the volcanic construction of Tharsis. The largest surviving lowland impact, Utopia, post-dated formation of the crustal dichotomy. Its crustal structure is preserved, making it unlikely that the northern crust was subsequently thinned by internal processes.
Moving academic research forward during COVID-19 Wigginton, N S; Cunningham, R M; Katz, R H ...
Science (American Association for the Advancement of Science),
06/2020, Letnik:
368, Številka:
6496
Journal Article
Recenzirano
Odprti dostop
A gradual, stepwise approach to reopening, informed by public health expertise, will be essential
The coronavirus disease 2019 (COVID-19) pandemic has led to an unprecedented disruption of society. ...Institutions of higher education have been no exception. To preserve the safety of their communities and adhere to public health guidance, universities and colleges around the world have rapidly pivoted to fully online teaching and learning models, implemented remote work for the majority of employees, and shuttered countless public spaces and programs. Most “on-site” research activities—in laboratories, in clinics, or in the field—also ground to a halt. Many institutions are now planning or implementing a ramp-up of on-site research activities, which offers an opportunity to begin implementing policies and practices that will lay the groundwork for the eventual reopening of additional onsite academic programming, including teaching. To ramp up safely, institutions are working with stakeholder groups—such as public health experts, as well as faculty, staff, and students—to develop guiding principles that will help inform and drive decision-making over the coming months. We synthesized several risk and decision-making frameworks under development at our universities to develop a set of criteria informed by public health expertise that institutions should consider before and during the first stages of restoring research activities and less certain factors to consider for subsequent phases.
Hydrogen has been inferred to occur in enhanced concentrations within permanently shadowed regions and, hence, the coldest areas of the lunar poles. The Lunar Crater Observation and Sensing Satellite ...(LCROSS) mission was designed to detect hydrogen-bearing volatiles directly. Neutron flux measurements of the Moon's south polar region from the Lunar Exploration Neutron Detector (LEND) on the Lunar Reconnaissance Orbiter (LRO) spacecraft were used to select the optimal impact site for LCROSS. LEND data show several regions where the epithermal neutron flux from the surface is suppressed, which is indicative of enhanced hydrogen content. These regions are not spatially coincident with permanently shadowed regions of the Moon. The LCROSS impact site inside the Cabeus crater demonstrates the highest hydrogen concentration in the lunar south polar region, corresponding to an estimated content of 0.5 to 4.0% water ice by weight, depending on the thickness of any overlying dry regolith layer. The distribution of hydrogen across the region is consistent with buried water ice from cometary impacts, hydrogen implantation from the solar wind, and/or other as yet unknown sources.
The crust and mantle of Mars Zuber, Maria T
Nature (London),
07/2001, Letnik:
412, Številka:
6843
Journal Article
Recenzirano
Odprti dostop
Clues to the history of Mars are recorded in the chemistry and structure of the planet's crust and mantle. The mantle is the rocky, interior region of the planet that transports heat generated during ...accretion and subsequent core formation. The crust formed by melting of the upper mantle, and has been shaped and re-distributed by impact, volcanism, mantle flow and erosion. Observations point to a dynamically active interior in the early phases of martian history, followed by a rapid fall-off in heat transport that significantly influenced the geological, geophysical and geochemical evolution of the planet, including the history of water and climate.
PDF
