Following its pioneering application in the present LHCb Velo detector, CO2 evaporative cooling has become the consolidated technology for the thermal management of low-temperature operated silicon ...detectors at LHC. ATLAS Insertable B-Layer and CMS Phase I Pixel are successfully operating with such cooling system since a few years and LHCb has selected the same technology for the new Upstream Tracker and the upgraded Velo, both to be installed during LS2. The design of the ATLAS and CMS upgrade silicon detectors is well advanced, and both experiments heavily rely on CO2 evaporative cooling. In order to cope with the new detector requirements, several studies are on-going, in particular on the scaling of the cooling plants, their integration in the existing space and infrastructure, the low temperature operation. A demonstrator cooling system, the “Demo”, is presently in the design phase at CERN. This paper discusses the challenges of the CO2 systems for the phase 2 upgrade of the LHC experiments, the design of the “Demo” cooling system and the integration and operational issues under study, presenting a time-line for the CO2 system development from now up to operation.
In the last few years, CO2 evaporative cooling has been one of the favourite technologies chosen for the thermal management of tracking detectors at LHC. ATLAS Insertable B-Layer and CMS Pixel phase ...1 upgrade have adopted it and their systems are now operational or under commissioning. The CERN PH-DT team is now merging the lessons learnt on these two systems in order to prepare the design and construction of the cooling systems for the new Upstream Tracker and the Velo upgrade in LHCb, due by 2018. Meanwhile, the preliminary design of the ATLAS and CMS full tracker upgrades is started, and both concepts heavily rely on CO2 evaporative cooling. This paper highlights the performances of the systems now in operation and the challenges to overcome in order to scale them up to the requirements of the future generations of trackers. In particular, it focuses on the conceptual design of a new cooling system suited for the large phase 2 upgrade programmes, which will be validated with the construction of a common prototype in the next years.
ATLAS “Baby-DEMO” Zwalinski, L.; Bojdol, K.; Bortolin, C. ...
Nuclear instruments & methods in physics research. Section A, Accelerators, spectrometers, detectors and associated equipment,
08/2019, Letnik:
936
Journal Article
Recenzirano
Odprti dostop
Evaporative CO2 has been selected as the main detector cooling technology for the Phase II upgrade of the LHC silicon detectors at CERN. In order to provide input to the ATLAS Pixel TDR about the ...minimum attainable cooling temperature by the end of 2017, ATLAS, with a contribution of CMS, has launched a dedicated detector cooling R&D study nick-named Baby-DEMO. The Baby-DEMO is the demonstration of a typical 2PACL CO2 cooling plant operating at the lowest temperature ever achieved. A real size ATLAS mock-up is used to hold realistic manifolding as its critical path might have strong impact on the cooling performance. Additionally, the “Baby-DEMO” program addresses the study of high power flexible vacuum insulated coaxial transfer lines and warm nose boiling enhancement as possible solutions for the Phase II upgrade. This paper describes the system design including CO2 plant, primary chiller and typical distribution. Challenges and solutions used to achieve the lowest possible evaporation temperatures are reported. The result of this study, even if at the preliminary stage, are of great interest for the design of the cooling systems that ATLAS and CMS will use in the Phase II era.
•Target minimum cooling evaporator temperature achieved, 5kW @ <−40°C at dummy load•Larger than expected temperature gradients observed in flex lines.•Stable long term operation at −47°C accumulator cooling.•Record low temperature of −50°C achieved with manual tricks.
A search for the narrow structure, X(5568), reported by the DO Collaboration in the decay sequence X -> B-s(0) pi +/-, B-s(0) -> J/psi phi, is presented. The analysis is based on a data sample ...recorded with the ATLAS detector at the LHC corresponding to 4.9 fb(-1) of pp collisions at 7 TeV and 19.5 fb(-1)at 8 TeV. No significant signal was found. Upper limits on the number of signal events, with properties corresponding to those reported by DO, and on the A production rate relative to B-s(0) mesons, rho x, were determined at 95% confidence level. The results are N(X) < 382 and rho x <0.015 for B-s(0) mesons with transverse momenta above 10 GeV and N(X) < 356 and rho(x) < 0.016 for transverse momenta above 15 GeV. Limits are also set for potential B-s(0) pi(+) resonances in the mass range 5550 to 5700 MeV.
A measurement of the production of three isolated photons in proton-proton collisions at a centre-of-mass energy root s = 8 TeV is reported. The results are based on an integrated luminosity of 20.2 ...fb(-1) collected with the ATLAS detector at the LHC. The differential cross sections are measured as functions of the transverse energy of each photon, the difference in azimuthal angle and in pseudorapidity between pairs of photons, the invariant mass of pairs of photons, and the invariant mass of the triphoton system. A measurement of the inclusive fiducial cross section is also reported. Next-to-leading-order perturbative QCD predictions are compared to the cross-section measurements. The predictions underestimate the measurement of the inclusive fiducial cross section and the differential measurements at low photon transverse energies and invariant masses. They provide adequate descriptions of the measurements at high values of the photon transverse energies, invariant mass of pairs of photons, and invariant mass of the triphoton system.
The results of a search for the direct pair production of top squarks, the supersymmetric partner of the top quark, in final states with one isolated electron or muon, several energetic jets, and ...missing transverse momentum are reported. The analysis also targets spin-0 mediator models, where the mediator decays into a pair of dark-matter particles and is produced in association with a pair of top quarks. The search uses data from proton-proton collisions delivered by the Large Hadron Collider in 2015 and 2016 at a centre-of-mass energy of root s = 13TeV and recorded by the ATLAS detector, corresponding to an integrated luminosity of 36 fb(-1). A wide range of signal scenarios with different mass-splittings between the top squark, the lightest neutralino and possible intermediate supersymmetric particles are considered, including cases where the W bosons or the top quarks produced in the decay chain are off-shell. No significant excess over the Standard Model prediction is observed. The null results are used to set exclusion limits at 95% confidence level in several supersymmetry benchmark models. For pair-produced top-squarks decaying into top quarks, top-squark masses up to 940 GeV are excluded. Stringent exclusion limits are also derived for all other considered top-squark decay scenarios. For the spin-0 mediator models, upper limits are set on the visible cross-section.
Inclusive jet and dijet cross-sections are measured in proton-proton collisions at a centre-of-mass energy of 13 TeV. The measurement uses a dataset with an integrated luminosity of 3.2 fb(-1) ...recorded in 2015 with the ATLAS detector at the Large Hadron Collider. Jets are identified using the anti-lit algorithm with a radius parameter value of R = 0.4. The inclusive jet cross-sections are measured double-differentially as a function of the jet transverse momentum, covering the range from 100 GeV to 3.5 TeV, and the absolute jet rapidity up to vertical bar y vertical bar = 3. The double-differential dijet production cross-sections are presented as a function of the dijet mass, covering the range from 300 GeV to 9 TeV, and the half absolute rapidity separation between the two leading jets within vertical bar y vertical bar < 3, y*, up to y* = 3. Next-to-leading-order, and next-to-next-to-leading-order for the inclusive jet measurement, perturbative QCD calculations corrected for non-perturbative and electroweak effects are compared to the measured cross-sections.
A measurement of the ZZ production cross section in the l(-)l(+)l'(-)l'(+) and l(-)l(+) nu(nu) over bar channels (l = e, mu) in proton-proton collisions at root s = 8TeV at the Large Hadron Collider ...at CERN, using data corresponding to an integrated luminosity of 20.3 fb(-1) collected by the ATLAS experiment in 2012 is presented. The fi ducial cross sections for ZZ -> l(-)l(+)l'(-)l'(+) and ZZ -> l(-)l(+) nu(nu) over bar are measured in selected phase-space regions. The total cross section for ZZ events produced with both Z bosons in the mass range 66 to 116 GeV is measured from the combination of the two channels to be 7.3 +/- 0.4 (stat) +/- 0.3 (syst) (-0.2)(-0.1) (lumi) pb, which is consistent with the Standard Model prediction of 6.6(-0.6)(+0.7) pb. The di ff erential cross sections in bins of various kinematic variables are presented. The differential event yield as a function of the transverse momentum of the leading Z boson is used to set limits on anomalous neutral triple gauge boson couplings in ZZ production.
This article presents a search for flavour-changing neutral currents in the decay of a top quark into an up-type (q = c; u) quark and a Higgs boson, where the Higgs boson decays into two photons. The ...proton-proton collision data set analysed amounts to 36.1 fb(-1) at root s = 13TeV collected by the ATLAS experiment at the LHC. Top quark pair events are searched for, where one top quark decays into qH and the other decays into bW. Both the hadronic and leptonic decay modes of the W boson are used. No significant excess is observed and an upper limit is set on the t -> cH branching ratio of 2 : 2 x 10(-3) at the 95% confidence level, while the expected limit in the absence of signal is 1 : 6 x 10(-3). The corresponding limit on the tcH coupling is 0.090 at the 95% confidence level. The observed upper limit on the t -> uH branching ratio is 2 : 4 x 10(-3).
The production of two prompt J/psi mesons, each with transverse momenta p(T) > 8.5 GeV and rapidity vertical bar y vertical bar < 2.1, is studied using a sample of proton-proton collisions at ...root s = 8 TeV, corresponding to an integrated luminosity of 11.4 fb(-1) collected in 2012 with the ATLAS detector at the LHC. The differential cross-section, assuming unpolarised J/psi production, is measured as a function of the transverse momentum of the lower-p(T) J/psi meson, di-J/psi p(T) and mass, the difference in rapidity between the two J/psi mesons, and the azimuthal angle between the two J/psi mesons. The fraction of prompt pair events due to double parton scattering is determined by studying kinematic correlations between the two J/psi mesons. The total and double parton scattering cross-sections are compared with predictions. The effective cross-section of double parton scattering is measured to be sigma(eff) = 6.3 +/- 1.6(stat) +/- 1.0(syst) mb.
PDF
