Alloy nanoparticles are important in many fields, including catalysis, plasmonics, and electronics, due to the chemical and physical properties that arise from the interactions between their ...components. Typically, alloy nanoparticles are made by solution-based synthesis; however, scanning-probe-based methods offer the ability to make and position such structures on surfaces with nanometer-scale resolution. In particular, scanning probe block copolymer lithography (SPBCL), which combines elements of block copolymer lithography with scanning probe techniques, allows one to synthesize nanoparticles with control over particle diameter in the 2–50 nm range. Thus far, single-element structures have been studied in detail, but, in principle, one could make a wide variety of multicomponent systems by controlling the composition of the polymer ink, polymer feature size, and metal precursor concentrations. Indeed, it is possible to use this approach to synthesize alloy nanoparticles comprised of combinations of Au, Ag, Pd, Ni, Co, and Pt. Here, such structures have been made with diameters deliberately tailored in the 10–20 nm range and characterized by STEM and EDS for structural and elemental composition. The catalytic activity of one class of AuPd alloy nanoparticles made via this method was evaluated with respect to the reduction of 4-nitrophenol with NaBH4. In addition to being the first catalytic studies of particles made by SPBCL, these proof-of-concept experiments demonstrate the potential for SPBCL as a new method for studying the fundamental science and potential applications of alloy nanoparticles in areas such as heterogeneous catalysis.
Sodium batteries have been regarded as promising candidates for large-scale energy storage application, provided cathode hosts with high energy density and long cycle life can be found. Herein, we ...report NASICON-structured Na
MnZr(PO
)
as a cathode for sodium batteries that exhibits an electrochemical performance superior to those of other manganese phosphate cathodes reported in the literature. Both the Mn
/Mn
and Mn
/Mn
redox couples are reversibly accessed in Na
MnZr(PO
)
, providing high discharge voltage plateaus at 4.0 and 3.5 V, respectively. A high discharge capacity of 105 mAh g
was obtained from Na
MnZr(PO
)
with a small variation of lattice parameters and a small volume change on extraction of two Na
ions per formula unit. Moreover, Na
MnZr(PO
)
exhibits an excellent cycling stability, retaining 91% of the initial capacity after 500 charge/discharge cycles at 0.5 C rate. On the basis of structural analysis and density functional theory calculations, we have proposed a detailed desodiation pathway from Na
MnZr(PO
)
where Mn and Zr are disordered within the structure. We further show that the cooperative Jahn-Teller distortion of Mn
is suppressed in the cathode and that Na
MnZr(PO
)
is a stable phase.
Peptides are fragments of proteins that carry out biological functions. They act as signaling entities via all domains of life and interfere with protein-protein interactions, which are indispensable ...in bio-processes. Short peptides include fundamental molecular information for a prelude to the symphony of life. They have aroused considerable interest due to their unique features and great promise in innovative bio-therapies. This work focusing on the current state-of-the-art short peptide-based therapeutical developments is the first global review written by researchers from all continents, as a celebration of 100 years of peptide therapeutics since the commencement of insulin therapy in the 1920s. Peptide "drugs" initially played only the role of hormone analogs to balance disorders. Nowadays, they achieve numerous biomedical tasks, can cross membranes, or reach intracellular targets. The role of peptides in bio-processes can hardly be mimicked by other chemical substances. The article is divided into independent sections, which are related to either the progress in short peptide-based theranostics or the problems posing challenge to bio-medicine. In particular, the SWOT analysis of short peptides, their relevance in therapies of diverse diseases, improvements in (bio)synthesis platforms, advanced nano-supramolecular technologies, aptamers, altered peptide ligands and in silico methodologies to overcome peptide limitations, modern smart bio-functional materials, vaccines, and drug/gene-targeted delivery systems are discussed.
The ability to engineer surface properties of nanocrystals (NCs) is important for various applications, as many of the physical and chemical properties of nanoscale materials are strongly affected by ...the surface chemistry. Here, we report a facile ligand-exchange approach, which enables sequential surface functionalization and phase transfer of colloidal NCs while preserving the NC size and shape. Nitrosonium tetrafluoroborate (NOBF4) is used to replace the original organic ligands attached to the NC surface, stabilizing the NCs in various polar, hydrophilic media such as N,N-dimethylformamide for years, with no observed aggregation or precipitation. This approach is applicable to various NCs (metal oxides, metals, semiconductors, and dielectrics) of different sizes and shapes. The hydrophilic NCs obtained can subsequently be further functionalized using a variety of capping molecules, imparting different surface functionalization to NCs depending on the molecules employed. Our work provides a versatile ligand-exchange strategy for NC surface functionalization and represents an important step toward controllably engineering the surface properties of NCs.
Carbonic anhydrase (CA, EC 4.2.1.1) is an enzyme and a very omnipresent zinc metalloenzyme which catalyzed the reversible hydration and dehydration of carbon dioxide and bicarbonate; a reaction which ...plays a crucial role in many physiological and pathological processes. Carbonic anhydrase is present in human (h) with sixteen different isoforms ranging from hCA I-hCA XV. All these isoforms are widely distributed in different tissues/organs and are associated with a range of pivotal physiological activities. Due to their involvement in various physiological roles, inhibitors of different human isoforms of carbonic anhydrase have found clinical applications for the treatment of various diseases including glaucoma, retinopathy, hemolytic anemia, epilepsy, obesity, and cancer. However, clinically used inhibitors of CA (acetazolamide, brinzolamide, dorzolamide, etc.) are not selective causing the undesirable side effects. One of the major hurdles in the design and development of carbonic anhydrase inhibitors is the lack of balanced isoform selectivity which thrived to new chemotypes. In this review, we have compiled the recent strategies of various researchers related to the development of carbonic anhydrase inhibitors belonging to different structural classes like pyrimidine, pyrazoline, selenourea, isatin, indole, etc. This review also summarizes the structure-activity relationships, analysis of isoform selectivity including mechanistic and in silico studies to afford ideas and to provide focused direction for the design and development of novel isoform-selective carbonic anhydrase inhibitors with therapeutic implications.
Display omitted
•Human CAs (hCAs) represents validated drug targets for the treatment of various clinical disorders.•Recent advances in the medicinal chemistry of hCA inhibitors along with their SAR have been described.•In vitro and in vivo pharmacological activities of various CAIs including mechanistic and in silico studies are discussed.•The article helps researchers for the rational design of new selective inhibitors with desired therapeutic profile.
Direct C–H functionalization of aromatic compounds is a useful synthetic strategy that has garnered much attention because of its application to pharmaceuticals, agrochemicals, and late-stage ...functionalization reactions on complex molecules. On the basis of previous methods disclosed by our lab, we sought to develop a predictive model for site selectivity and extend this aryl functionalization chemistry to a selected set of heteroaromatic systems commonly used in the pharmaceutical industry. Using electron density calculations, we were able to predict the site selectivity of direct C–H functionalization in a number of heterocycles and identify general trends observed across heterocycle classes.
This paper reports the robust hydrothermal synthesis of N-CDs using the unripe fruit of peach as the carbon precursor and aqueous ammonia as the nitrogen source. The synthesized N-CDs exhibits a good ...catalytic activity in an alkaline medium (0.1M KOH) with remarkable ORR and highly biocompatible thus it can be used as fluorescence imaging probes. Display omitted
This paper reports the robust hydrothermal synthesis of nitrogen doped carbon dots (N-CDs) using the unripe fruit of Prunus persica (peach) as the carbon precursor and aqueous ammonia as the nitrogen source. The optical properties of synthesized N-CDs were characterized by ultraviolet visible (UV–Vis) and fluorescence spectroscopy techniques. The synthesized N-CDs were emitted blue light when excitated with a portable UV lamp. The materials with the optical properties were characterized further by high resolution transmission electron microscope (HRTEM), X-ray diffraction (XRD), Raman, Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS). The mean size of the N-CDs was approximately 8nm, as calculated from the HRTEM image. The d-spacing of N-CDs, calculated using Bragg law, was approximately 0.21nm, which was consistent with the interlayer distance calculated from the HRTEM image. FT-IR spectroscopy and XPS revealed the presence of the phytoconstituents functionalities of peach fruit over the N-CDs surface and a high level of nitrogen doping on carbon dots (CDs) was confirmed by XPS studies. These results suggest that the unripe fruit extract of peach is an ideal candidate for the preparation of N-CDs. The resulting N-CDs showed excellent optical properties in water. The synthesized N-CDs exhibited a high fluorescence quantum yield and low cytotoxicity, and can be used as fluorescence imaging probes. In addition, the N-CDs were catalytically activite towards the oxygen reduction reaction (ORR). The N-CDs exhibited good catalytic activity in an alkaline medium (0.1M KOH) with a remarkable ORR of approximately 0.72V vs reversible hydrogen electrode (RHE), and O2 reduction follows mainly a 2 electron pathway by being reduced to hydrogen peroxide. The 2-electron reduction pathway is used in industry for H2O2 production.
We report the hydroxide (OH
) and oxide (O
) experimental electroadsorption free energies, their dependences on pH, and their correlations to the oxygen evolution reaction (OER) electrocatalysis on ...RuO
(110) surface. The Sabatier principle predicts that catalyst is most active when the intermediate stabilization is moderate, not too strong such that the bound intermediate disrupts the subsequent catalytic cycle, nor too weak such that the surface is ineffective. For decades, researchers have used this concept to rationalize the activity trend of many OER electrocatalysts including RuO
, which is among the state-of-the-art OER catalysts. In this article, we report an experimental assessment of the Sabatier principle by comparing the oxygen electroadsorption energy to the OER electrocatalysis for the first time on RuO
. We find that the OH
and O
electroadsorption energies on RuO
(110) depend on pH and obey the scaling relation. However, we did not observe a direct correlation between the OH
and O
electroadsorption energies and the OER activity in the comparative analysis that includes both RuO
(110) and IrO
(110). Our result raises a question of whether the Sabatier principle can describe highly active electrocatalysts, where the kinetic aspects may influence the electrocatalysis more strongly than the electroadsorption energy, which captures only the thermodynamics of the intermediates and not yet kinetics.
Supramolecular chemistry has emerged as an important technique for the formation of biomaterials, including nano- and microparticles and hydrogels. One specific class of supramolecular chemistry is ...the direct association of guest–host pairs, which involves host macrocycles such as cyclodextrins and cucurbitnurils and a wide range of guest molecules, where association is typically driven by molecule size and hydrophobicity. These systems are of particular interest in the biomedical field due to their dynamic nature, chemical diversity, relative ease of synthesis, and ability to interact with biological or synthetic molecules. In this review, we discuss aspects of polymeric material assembly mediated by guest–host interactions, including the fundamentals of assembly into functional biomedical materials. Additionally, applications of biomaterials that utilize guest–host interactions are discussed with a focus on injectable material formulations, the sequestration and delivery of encapsulated cargo (i.e., drugs, biomolecules), and the investigation of cell–material interactions (i.e., adhesion, differentiation, and delivery). While methodologies for guest–host mediated assembly and biological interaction have rapidly evolved in recent years, they remain far from realizing their full potential in the biomaterials field.
•Different thickening agents in combination with HPMC structured oleogels.•Strength of oleogels and mechanical strength of emulsions were found correlated.•Hydrogen bonding of polysaccharides driving ...to form of semi-crystalline structure.
Emulsion-templated approach was adopted to obtain edible oleogels using hydroxypropyl methyl cellulose (HPMC) as the main emulsifier in combination with the usage of thickening agents such as carboxymethyl cellulose (CMC), xanthan gum, sodium alginate, arabic gum, guar gum, flaxseed gum or locust bean gum. Polarized light microscopy (PLM) and rheological measurements were carried out to investigate the microstructure and mechanical strength of emulsions and their corresponding oleogels, respectively. X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) analyses were employed to study the interaction between polysaccharides. Gel strength and oil binding capacity of oleogels were related to the mechanical strength of emulsions as well as to the network of soft solids. Oleogels with semi-crystalline structure were formed by the binding of liquid oil to polysaccharides, which were stabilized by the intramolecular or intermolecular molecular hydrogen bonds between polysaccharides.