Advanced fluid machinery is the key component in the sustainable development of energy and water resources, including various transport processes for liquids. Where fluid flows, fluid machinery ...works. Therefore, fluid machinery occupies an important position in the social economy. This Special Issue, entitled “Optimization and Flow Characteristics in Advanced Fluid Machinery”, provides a platform for the sharing of knowledge among researchers in the field of fluid machinery, and includes theoretical analyses, numerical simulations, and experimental studies. This Special Issue covers a wide range of disciplines as follows: (1) optimization of advanced fluid machinery using different advanced algorithms; (2) flow characteristics of advanced fluid machinery using numerical and experimental methods; (3) vibration and noise of advanced fluid machinery; (4) fluid–structural coupling analysis of advanced fluid machinery; (5) cavitation and multi-phase flow of advanced fluid machinery; (6) simulation and optimization of new energy systems; and (6) other aspects of fluid machinery.This Special Issue contains 27 manuscripts, including 1 Editorial and 26 scientific articles. We would like to thank all of the authors and peer reviewers for their valuable contributions to this Special Issue.
•Investigated the dynamic behaviour of counter-current gas-liquid flow in annuli.•Provided new and interesting findings on flow behaviour in small and large annuli.•Characterised flow regimes by ...analysing the temporal pressure data.•Proposed an empirical model to predict the counter-current flow limitation.•Determined mechanisms responsible for transitioning to gas flooding.
This paper aims to characterise the complex flow behaviour of counter-current gas-liquid flows in concentric vertical annuli over a wide range of gas and liquid flowrates. The experiments were performed with air and water in two different annulus sizes: (a) a 100 mm hydraulic diameter annulus with a 170 mm diameter outer pipe and a 70 mm diameter inner pipe; and (b) a 19 mm hydraulic diameter annulus between 44 mm and 25 mm pipes, to investigate the effect of flow geometry on flow structure. Flow regimes were identified quantitatively by applying fast Fourier transform (FFT) on the associated pressure fluctuation signals, collected at 10 Hz and 100 Hz frequency. Video images captured at 4,000 fps with a high-speed camera were used in a visual analysis of the flow regimes to verify the FFT results. Furthermore, flow regime transitions and their underlying mechanisms were determined by their associated pressure gradient and void fractions, as well as analysis of temporal pressure signals. The commonly described slug flow regime, consisting of stable Taylor bubbles traversing the length of the channel, was not observed in the larger annulus. However, the FFT of the pressure signals indicate that unstable Taylor bubbles form as a result of bubble coalescence but collapse due to instability at the gas-liquid interface, known as Rayleigh-Taylor instability. Therefore, the apparent slug-churn flow regime was classified as a highly turbulent heterogeneous flow, developing at superficial gas velocities from 0.265 to 3.968 m/s and superficial liquid velocities from 0.004 to 0.147 m/s. Interestingly, annular flow regime did not develop in either of the tested small and large annuli. The onsets of counter-current flow limitations, or flooding, were identified in the 100 mm hydraulic diameter annulus with gas flooding due to very high gas flow rates and liquid flooding due to very high liquid flow rates. The mechanism that initiates gas flooding was observed to be the formation of large waves flowing upward near the water inlet point, with counter-current flow observed below the water inlet point at the onset of gas flooding. Clarity was also provided on the concepts of flooding and zero liquid penetration for the cases of flow in a water filled channel and a falling film, and a new empirical correlation for the onset of flooding was developed.
Pulsating flows through tubular geometries are laminar provided that velocities are moderate. This in particular is also believed to apply to cardiovascular flows where inertial forces are typically ...too low to sustain turbulence. On the other hand, flow instabilities and fluctuating shear stresses are held responsible for a variety of cardiovascular diseases. Here we report a nonlinear instability mechanism for pulsating pipe flow that gives rise to bursts of turbulence at low flow rates. Geometrical distortions of small, yet finite, amplitude are found to excite a state consisting of helical vortices during flow deceleration. The resulting flow pattern grows rapidly in magnitude, breaks down into turbulence, and eventually returns to laminar when the flow accelerates. This scenario causes shear stress fluctuations and flow reversal during each pulsation cycle. Such unsteady conditions can adversely affect blood vessels and have been shown to promote inflammation and dysfunction of the shear stress-sensitive endothelial cell layer.
Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of ...enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.
When an axial-flow pump works in low flow rate conditions, rotating stall phenomena will probably occur, and the pump will enter hydraulic unsteady conditions. The rotating stall can lead to violent ...vibration, noise, turbulent flow, and a sharp drop in efficiency. This affects the safety and stability of the pump unit. To study the rotating stall flow characteristics of an axial-flow pump, the steady and unsteady internal flow field in a large vertical axial-flow pump was investigated using 3D computational fluid dynamic (CFD) technology. Numerical calculations were carried out using the Reynolds-averaged Navier–Stokes (RANS) solver and Menter's shear stress transport (SST) k-ω turbulence model. Steady flow characteristics including streamline, velocity vector, pressure and turbulent kinetic energy are presented and analyzed. Unsteady flow characteristics are described using post-processing signals for pressure monitoring points in the time and frequency domains. Using Q-criterion, the locations and evolution rules of the core region of the vortex structure in guide vanes under deep stall conditions were investigated. The reliability of the numerical simulation results was verified using the experimental prototype pressure fluctuation test. In this way, typical flow structure and pressure fluctuation characteristics in an axial-flow pump were analyzed, with contrastive analysis in design condition and stall conditions. Finally, the mechanism of low-frequency pressure fluctuation in a pump unit under the stall condition was revealed.
The gas-liquid two-phase flow is widely encountered in many industrial applications, and its on-line and non-separation flow rate measurement for each phase has plagued the industry for many years. ...Based on the one-to-one correspondence between differential pressure fluctuations and the movement of Taylor bubbles and liquid slugs, a novel method is proposed to measure the flow rate of gas-liquid slug flow in this paper. Theoretical correlations between flow characteristics (velocity, length, and void fraction) and differential pressure fluctuations were quantitatively analyzed by experiments, and the gas-liquid ratio was found to be linearly related to the length ratio of Taylor bubble and liquid slug. The gas flow rate and liquid flow rate were predicted based on the measured flow characteristics. Experimental tests on air-water two-phase flow show that the proposed method and correlations were effective, and the average relative errors in the gas flow rate and liquid flow rate are 5.50% and 5.62% with maximum values of 11.46% and 12.06%, respectively, under the conditions of 0.16-0.56 m/s of air superficial velocity and 0.23-0.48 m/s of water velocity. This method is based only on the differential pressure fluctuations and is on-line, non-separation, non-invasive, and radiation-free, which provides a new cost-effective solution for the flow rate measurement of industrial two-phase flows.
A test facility to investigate flow pattern transitions of vertical two-phase flow of CO2 has been built within the scope of the high-luminosity detector upgrades at the European Organization for ...Nuclear Research (CERN). Adiabatic flow pattern observations for both vertical up- and downflow are recorded with high-speed imaging in tubes of 8 mm inner diameter, with saturation temperatures in the range of −25°C to +5°C and mass velocities ranging from 100kgm−2s−1 to 450kgm−2s−1. A database of 431 flow pattern observations in upward and 123 in downward direction has been compiled. The recorded data have been analysed with machine learning techniques and a previously trained Frame- and Flow-Regime-Classifier is used for the flow regime classification. The observed two-phase flow pattern transitions did not match the transition lines of existing flow pattern maps. As a consequence, new transition lines for the bubbly-to-slug, slug-to-churn and churn-to-annular transitions have been developed for both vertical upflow and downflow respectively and condensed into new flow pattern maps. It is concluded, that the flow regime transitions are strongly depended on vapour quality, mass velocity, the flow direction and the fluid properties. Compared to horizontal flow, a dryout region is not observed and the liquid film of the annular flow regime dries out symmetrically at vapour qualities close to x=1.
•Flow pattern visualization of vertical two-phase flow of carbon dioxide (CO2).•Flow pattern observations recorded with a high-speed camera and high-speed imaging.•Flow patterns are analysed with computer vision and machine learning techniques.•Flow regime transitions determined with CNN based Frame and Flow Regime Classifier.•New flow regime transitions and flow pattern map for vertical two-phase flow of CO2.