Objectives
In this study, we investigated the salivary film thickness and the MUC5B levels at various intra-oral locations in healthy volunteers, with a focus on the palate. Besides, measurements of ...the palatal surface area were included to explore the possible relationships between the palatal surface area and the palatal salivary film and MUC5B levels.
Materials and methods
The salivary film thickness was determined using filter strips, which were pressed to the mucosal surfaces of five different intra-oral locations; conductance was then analysed using a Periotron. After elution of the strips, the MUC5B levels at various intra-oral locations were determined using ELISA. The palatal surface area was measured using an intra-oral scanner. The surface area was subsequently calculated using the software.
Results
The anterior tongue had the thickest salivary film and also the highest levels of MUC5B, while the anterior palate had the thinnest salivary film and lowest MUC5B levels. There was no association between the palatal surface area and the salivary film thickness of the palate.
Conclusion
The salivary film and MUC5B levels are unequally distributed over the intra-oral regions of the soft tissues. The lack of association between the palatal surface area and the salivary film thickness indicates that a larger surface area is not associated with a relative thinner palatal salivary film.
Clinical relevance
The results of the current study increase our understanding of saliva distribution in the oral cavity and could be used as reference values for future studies.
Aims
To assess palatal volume, surface area and linear dimensions across sagittal and vertical components of malocclusion.
Methods
Pre‐treatment cephalographs and dental casts of 178 non‐growing ...patients (88 males, 90 females, age 25.81 ± 8.23 years) were used for classification in sagittal malocclusion groups: Class I (n = 48), Class II division 1 (n = 42), Class II division 2 (n = 40) and Class III (n = 48); and in vertical divergence groups based on the MP/SN angle: hypodivergent (n = 35), normodivergent (n = 95) and hyperdivergent (n = 48). Dental casts were scanned and palatal measurements recorded: palatal width, depth and interdental distances; palatal surface area (PSA, mm2) and volume (PV, mm3). A 3‐way ANOVA was used to compare palatal dimensions across groups. Pearson product‐moment correlations were employed to assess associations among variables.
Results
PSA and PV (in both sex groups) were not statistically significantly different across sagittal malocclusions and vertical patterns. Significant differences were depicted more among the vertical divergence groups than sagittal groups. Correlations between PSA and PV and palatal dimensions were low to moderate. Predictability of PSA and PV ranged between 15 and 18%.
Conclusion
The finding of similar palatal volume and surface area, on average, across malocclusions possibly underscores the limitations of environmental influences within the inherited orofacial phenotype. The vertical facial pattern seems to be more interactive with palatal dimensions than sagittal relations. Studies of palatal changes following orthodontic and orthognathic treatments are warranted.
Phonetics with mechanics and aesthetics are considered cardinal factors contributing to the success of complete dentures.
The aim of the current study was to evaluate the changes in speech in ...complete denture patients with and without palatal surface changes.
The data collected for the study involved completely edentulous Patients (n= 80). Patients were divided into two groups. Group A: Up to 50 years (n= 40); Group B: Above 50 years (n= 40) (including male and female). Each group was further divided into four subgroups for speech analysis-without dentures (A1/B1); with conventional dentures (A2/B2); dentures with a palatogram (A3/B3) and dentures with palate sandblasted (A4/B4). The speech sounds of all patients were evaluated for pitch and intensity using a spectrophotogram (Praat software) and Likert scale. The data so obtained from the quantitative and qualitative analysis were statistically analysed through one-way ANOVA, unpaired student's t-test, and Pearson correlation coefficient. Qualitative analysis was done with the Mann-Whitney U test.
The maximum mean value of the pitch and intensity in Groups A and B was subgroup A3 (Palatogram) 190.37 ± 21.50 and 77.07 ± 7.58, B3 (Palatogram) 190.87 ± 24.36 and 75.33 ± 8.12. When comparing Groups A A1, A2, A3, A4 and B B1, B2, B3, B4 on the basis of pitch and intensity, a statistically insignificant value was found. No changes in speech sounds (pitch and intensity) were observed in terms of age. Both quantitative and qualitative analysis results showed that speech sounds in the patients with palatogram, had the highest pitch and intensity and were most clear to the listener and there were statistically significant differences from other groups.
Speech was better in palatogram-based dentures in comparison to a sandblasted denture, conventional denture and without denture in terms of qualitative and quantitative analysis. The physiologic nature of the palatogram fabrication technique produces the palatal part of the denture more compatible with the tongue, thus producing better speech.
Purpose
Saliva distribution over the palatal surface plays an important role in the perception of dry mouth. It is envisaged that non-invasive estimation of the palatal surface area by anthropometric ...measurements of the head and face can be useful in the assessment of oral dryness. For this purpose, the relationship between the palatal surface area and anthropometric measurements of the head and face was investigated.
Methods
The palatal surface was measured in 51 healthy volunteers using an intra-oral scanner. The distances between anthropometric landmarks of the head and face were determined using an anatomical sliding caliper. Correlations between the palatal surface area and the anthropometric landmarks were investigated.
Results
The median palatal surface area for the total study population was found to be 2120.6 mm
2
. Virtually, all anthropometric measurements showed significant differences between females and males. Various head and face measurements had a significant correlation with the palatal surface area. However, these correlations disappeared when the participants were stratified based on their sex, with the exception of mandibular length and palatal width in females.
Conclusion
The surface area of the palate correlates with nearly all anthropometric measurements of the head and face included in this study. Yet, the clinical applicability seems limited to females.
summary Dentine bonding resins may play a role in protecting dentine against acids for patients with erosion. Therefore, it is important to try and understand what potential difficulties may ensue ...when bonding to worn dentine. This paper reviews the literature on the changes between normal and worn dentine and the effect of this on the bonding to composite resins. A medline search was undertaken using the terms erosion, tooth wear and dentine bonding up until the spring of 2003. Although there are changes on the surface of worn dentine, there is little evidence that this may affect the bond.