Since its introduction in the USA in 2003, reverse total shoulder arthroplasty (RTSA) has been used with increasingly frequency as surgeons have observed the remarkable improvement in pain, range of ...motion, and function associated with this implant. RTSA was initially used exclusively for elderly, low demand individuals with end-stage rotator cuff tear arthropathy. However, RTSA is now being increasingly successfully employed for the management of irreparable rotator cuff tears, glenohumeral osteoarthritis with an intact rotator cuff, acute proximal humerus fractures, the sequelae of proximal humerus fractures, neoplasms of the proximal humerus, inflammatory arthropathy, young patients and failed anatomic total shoulder arthroplasty and hemiarthroplasty. While long-term outcomes are pending, short- and mid-term follow-up results suggest that in experienced hands, RTSA may be a reasonable treatment for many previously difficult to treat pathologies within the shoulder.
The stemmed anatomical total shoulder arthroplasty is the gold standard in the treatment of glenohumeral osteoarthritis. However, the use of stemless total shoulder arthroplasties has increased in ...recent years. The number of revision procedures are relatively low and therefore it has been recommended that national joint replacement registries should collaborate when comparing revision rates. Therefore, we aimed to compare the revision rates of stemmed and stemless TSA used for the diagnosis of glenohumeral osteoarthritis using data from both the Australian Orthopaedic Association National Joint Replacement Registry (AOANJRR) and the Danish Shoulder Arthroplasty Registry (DSR).
We included all patients who were registered in the AOANJRR and the DSR from January 1 2012 to December 2021 with an anatomical total shoulder arthroplasty used for osteoarthritis. Revision for any reason was used as the primary outcome. We used the Kaplan-Meier method to illustrate the cumulative revision rates and a multivariate cox regression model to calculate the hazard ratios. All analyses were performed separately for data from AOANJRR and DSR, and the results were then reported using a qualitative approach.
13066 arthroplasties from AOANJRR and 2882 arthroplasties from DSR were included. The hazard ratio for revision of stemmed TSA with stemless TSA as reference, adjusted for age and gender, was 1.67 (95% CI 1.34-2.09, p<0.001) in AOANJRR and 0.57 (95% CI 0.36-0.89, p=0.014) in DSR. When including glenoid type and fixation, surface bearing (only in AOANJRR) and hospital volume in the cox regression model the hazard ratio for revision of stemmed TSA compared to stemless TSA was 1.22 (95% CI 0.85-1.75, p=0.286) in AOANJRR and 1.50 (95% CI 0.91-2.45, p=0.109) in DSR. The adjusted hazard ratio for revision of total shoulder arthroplasties with metal backed glenoid components compared to all-polyethylene glenoid components was 2.54 (95% CI 1.70-3.79, p < 0.001) in AOANJRR and 4.1 (95% CI 1.92-8.58, p<0.001) in DSR.
Based on data from two national shoulder arthroplasty registries, we found no significant difference in risk of revision between stemmed and stemless total shoulder arthroplasties after adjusting for the type of glenoid component. We advocate that metal-backed glenoid components should be used with caution and not on a routine basis.
Background
Anatomic total shoulder arthroplasty improves pain and function with a reported reoperation rate of approximately 1% per year. With improved glenoid fixation, reverse shoulder arthroplasty ...implants may outperform anatomic total shoulder arthroplasty. We evaluate the functional outcomes and reoperation rate of anatomic total shoulder arthroplasty versus reverse shoulder arthroplasty at a minimum eight-year follow-up or revision.
Methods
Between 2005 and 2010, 187 shoulders (137 anatomic total shoulder arthroplasty, 50 reverse shoulder arthroplasty) were retrospectively reviewed at a mean of 8.8 years. The mean age at surgery was 67 years. Females were more commonly treated with reverse shoulder arthroplasty. Both groups had similar body mass index and comorbidities. Outcome measures evaluated included abduction, forward elevation, external rotation, internal rotation, Simple Shoulder Test, Constant score, American Shoulder and Elbow Score, University of California Los Angeles Shoulder score, and Shoulder Pain and Disability Index.
Results
At follow-up, anatomic total shoulder arthroplasty demonstrated greater overhead range of motion and external rotation. All patient-reported outcomes remained similar between groups. Reverse shoulder arthroplasty patients were more likely to rate shoulders as much better or better after surgery (90% versus 67%, p = 0.004). Complications were observed in 24% of anatomic total shoulder arthroplasties and 8% of reverse shoulder arthroplasties (p = 0.02). Reoperation was more common in anatomic total shoulder arthroplasties (23% versus 4%, p = 0.003).
Discussion
At mid-to-long-term follow-up, reverse shoulder arthroplasties demonstrated significantly fewer complications and reoperations than anatomic total shoulder arthroplasties. Despite similar patient-reported outcomes, reverse shoulder arthroplasty patients were more likely to be satisfied with their shoulder.
Preoperative 3D planning is routinely used in primary shoulder arthroplasty, while specific challenges in the revision setting make such approaches more cumbersome and less accessible. Recently, an ...established preoperative planning software (Blueprint; Stryker, Tornier SA, Montbonnot-Saint-Martin, France) was expanded to offer a capability for planning of revision and complex primary shoulder arthroplasty cases. The aim of this study was to survey experienced surgeons on their perception of the new software feature for preoperative 3D planning in the setting of revision shoulder arthroplasty.
An observational survey was conducted from January 2022 to October 2022 among orthopedic surgeons performing revision shoulder arthroplasty cases. The survey was part of the Early Product Surveillance program, with the primary goal of obtaining observational data from surgical experience in a real-world setting. A two-staged survey process was applied with separate questionnaires to seek voluntary feedback on the preoperative planning phase as well as on the intraoperative evaluation of the software planning features in revision shoulder arthroplasty.
Twenty-five fellowship-trained orthopedic surgeons from the USA and Canada participated in the survey and reported their feedback on 34 revision shoulder arthroplasty cases that were preoperatively planned with the use of Blueprint revision planning software. The surgeons were largely in favor of the revision software planning features and confirmed perceived benefits of its use in the preoperative planning stage of revision shoulder arthroplasty cases. Reported benefits in the preoperative planning phase included increased efficiency and improved ease of creating an appropriate surgical plan as well as increased confidence to execute revision shoulder arthroplasty cases. Surgeons also noted improvements in translation of preoperative planning to intraoperative execution of revision cases, including more appropriate implant selection and improved accuracy of implant placement.
The feedback from fellowship-trained shoulder arthroplasty surgeons on the use of the new software feature for preoperative 3D planning of revision shoulder arthroplasty is largely favorable. Further research should be conducted to investigate whether these surgeon-perceived benefits can lead to improved clinical outcomes for patients.
The Walch classification is commonly used by surgeons when determining the treatment of osteoarthritis (OA). However, its utility in prognosticating patient clinical state before and after TSA ...remains unproven. We assessed the prognostic value of the modified Walch glenoid classification on preoperative clinical state and postoperative clinical and radiographic outcomes in total shoulder arthroplasty (TSA).
A prospectively collected, multicenter database for a single-platform TSA system was queried for patients with rotator cuff-intact OA and minimum 2 year follow-up after anatomic (aTSA) and reverse TSA (rTSA). Differences in patient-reported outcome scores (Simple Shoulder Test, American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form, Shoulder Pain and Disability Index, visual analog scale for pain, Shoulder Function score), combined patient-reported and clinical-input scores (Constant, University of California-Los Angeles shoulder score, Shoulder Arthroplasty Smart Score), active range of motion values (forward elevation FE, abduction, external rotation ER, internal rotation IR, and radiographic outcomes (humeral and glenoid radiolucency line rates, scapula notching rate) were stratified and compared by glenoid deformity type per the Walch classification for aTSA and rTSA cohorts. Comparisons were performed to assess the ability of the Walch classification to predict the preoperative, postoperative, and improved state after TSA.
1008 TSAs were analyzed including 576 aTSA and 432 rTSA. Comparison of outcomes between Walch glenoid types resulted in 15 pairwise comparisons of 12 clinical outcome metrics, yielding 180 total Walch glenoid pairwise comparisons for each clinical state (preoperative, postoperative, improvement). Of the 180 possible pairwise Walch glenoid type and metric comparisons studied for aTSA and rTSA cohorts, <6% and <2% significantly differed in aTSA and rTSA cohorts, respectively. Significant differences based on Walch type were seen after adjustment for multiple pairwise comparisons in the aTSA cohort for FE and ER preoperatively, the Constant score postoperatively, and for abduction, FE, ER, Constant score, and SAS score for pre- to postoperative improvement. In the rTSA cohort, significant differences were only seen in abduction and Constant score both postoperatively and for pre- to postoperative improvement. There were no statistically significant differences in humeral lucency rate, glenoid lucency rate (aTSA), scapular notching rate (rTSA), complication rates, or revision rates between Walch glenoid types after TSA.
Although useful for describing degenerative changes to the glenohumeral joint, we demonstrate a weak association between preoperative glenoid morphology according to the Walch classification and clinical state when evaluating patients undergoing TSA for rotator cuff-intact OA. Alternative glenoid classification systems or predictive models should be considered to provide more precise prognoses for patients undergoing TSA for rotator cuff-intact OA.
Purpose of Review
The incidence of shoulder arthroplasty is increasing dramatically for primary arthroplasty but also for revision arthroplasty. Revision to reverse total shoulder arthroplasty is ...increasingly the salvage operation for failed primary arthroplasty. The purpose of this review is to explore the indications for and results of revision reverse total shoulder arthroplasty.
Recent Findings
Despite relatively high complication and reoperation rates with revision shoulder replacement, revision of failed hemiarthroplasty or total shoulder arthroplasty to reverse total shoulder arthroplasty improves outcomes for many patients. A failed hemiarthroplasty or total shoulder arthroplasty is frequently disabling for the patient and because the surgical revision options are often limited only to reverse total shoulder arthroplasty, the potential improvement is often worth the higher surgical complication or reoperation rate.
Summary
Due to the challenges inherent in revision arthroplasty, revision of primary arthroplasty to reverse total shoulder arthroplasty, outcomes are poorer than primary reverse total shoulder arthroplasty. Despite these limitations, patient postoperative pain and function do increase from preoperative levels making conversion of hemiarthroplasty or anatomic total shoulder to reverse total shoulder arthroplasty an important option for a challenging problem.
The purpose of this study was to determine the prevalence and responsiveness of common patient-reported outcome (PRO) tools in patients undergoing primary total shoulder arthroplasty (TSA) for ...glenohumeral arthritis.
Using Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, a systematic review of anatomic and reverse TSA studies from PubMed, SportDiscus, Cochrane, and CINAHL was performed. Studies on primary TSA for glenohumeral arthritis that reported at least 1 PRO tool were included in the final analysis. A subgroup analysis of studies that reported preoperative and postoperative PRO scores with at least 2-year follow-up data was evaluated to compare the responsiveness between the different PRO instruments.
After full-text review of 490 articles, 74 articles met all inclusion criteria and were included in the final analysis. Anatomic TSA was evaluated in 35 studies, reverse TSA in 32 studies, and both anatomic and reverse in 7 studies. There were a total of 7624 patients, and 25 different PRO tools were used. The most commonly reported PRO tools were the American Shoulder and Elbow Surgeons (44 studies), Constant (42 studies), the visual analog scale for pain (23 studies), and the Simple Shoulder Test (17 studies). A median of 3.0 PRO instruments were used in each study. All instruments had large effect sizes. The University of California at Los Angeles (UCLA) score was found to be the most responsive instrument, and the Single Assessment Numeric Evaluation score was least responsive. The American Shoulder and Elbow Surgeons score was the most responsive instrument that required only patient-reported data.
Overall, the UCLA score was found to be the most responsive followed by the Adjusted Constant. However, both the UCLA and Adjusted Constant scores require strength and range of motion assessment that may limit their widespread clinical use. The increased responsiveness of these measures, which include objective clinical testing, speaks to the predicted increases in strength and range of motion after shoulder arthroplasty. Of the measures that can be administered without in-person clinical evaluation, the American Shoulder and Elbow Surgeons score and Western Ontario Osteoarthritis of the Shoulder index were the most responsive.
Reverse shoulder arthroplasty (RSA) is rapidly growing in the United States. As the number of procedures increases, the number of complications and need for additional surgeries correspondingly ...continues to grow. The purpose of this study was to describe clinical and functional outcomes of revision of RSA to RSA.
A retrospective review of 29 patients from 2 centers who underwent revision surgery following RSA to RSA from 2007 to 2017 was conducted. The reasons for revision were recorded. Clinical outcome measures including shoulder range of motion, American Shoulder and Elbow Surgeons score, Single Assessment Numerical Evaluation score, simple shoulder test and Visual analog scale scores were collected for all patients at an average follow-up of 29 months. Postoperative complications were also recorded.
A total of 29 patients were identified. The average time between index RSA and revision was 2.3 years (30 days – 7 years). Mean follow-up duration for clinical outcome measures was 29.1 months (12-114 months). The most common indication for revision surgery was aseptic loosening (13/29, 44.8%), followed by instability (7/29, 24.1%), fracture (5/29, 17.2%), and infection (4/29, 13.7%). The average Visual analog scale decreased from 7 to 3 (P< .001). American Shoulder and Elbow Surgeons score scores improved from a mean of 30 to 58 (P < .001). Single Assessment Numerical Evaluation score scores improved from 26 to 54 (P < .001), and Simple shoulder test improved from 2 to 6 (P = .001). Range of motion in both forward elevation from 76° to 131° (P < .001) and external rotation from 26 to 42 (P = .001). Complications were seen in 10 of 29 patients (34.5%).
A failed RSA can be managed with revision RSA with acceptable clinical outcomes although outcome is inferior to primary RSA with a high rate of complications.
Level IV; Retrospective Case Series
One innovation to reduce glenoid loosening in total shoulder arthroplasty (TSA) is a large, central ingrowth peg. However, when bone ingrowth fails to occur, there is often increased bone loss ...surrounding the central peg which may increase complexity of subsequent revisions. Our goal was to compare outcomes between central ingrowth pegs and noningrowth pegged glenoid components during revision to reverse total shoulder arthroplasty.
In a comparative retrospective case series, all patients who underwent TSA-to-reverse TSA revision between 2014 and 2022 were reviewed. Demographic varibles as well as clinical and radiographic outcomes were collected. Ingrowth central peg and noningrowth pegged glenoid groups were compared using t-test, Mann-Whitney U, Chi-Square, or Fisher’s exact tests where indicated.
Overall, 49 patients were included: 27 underwent revision from noningrowth and 22 from central ingrowth components. Females more commonly had noningrowth components (74% vs. 45%, P = .04) and preoperative external rotation was higher in central ingrowth components (P = .02). Time to revision was significantly earlier in central ingrowth components (2.4 vs. 7.5 years, P = .01). Structural glenoid allografting was required more with noningrowth components (30% vs. 5%, P = .03) and time to revision in patients ultimately requiring allograft reconstruction was significantly later (9.96 vs. 3.68 years, P = .03).
Central ingrowth pegs on glenoid components were associated with decreased need for structural allograft reconstruction during revision; however, time to revision was earlier in these components. Further research should focus on whether glenoid failure is due to glenoid component design, time to revision, or both.
This reprint focused on the advancements in the field of shoulder arthroplasty in recent years. These concern surgical indications that have dramatically evolved and planification and navigation. The ...rapid development of surgical techniques and new prosthetic designs, as well as glenoid and humeral reconstruction for various conditions, is also overviewed. Despite the important progress highlighted in this reprint, there is currently a myriad of prosthetic designs, highlighting the evolving nature of this field.