NUK - logo
E-viri
Celotno besedilo
Recenzirano
  • Kinetic and mechanistic und...
    Rougé, Valentin; Lee, Yunho; von Gunten, Urs; Allard, Sébastien

    Water research (Oxford), 07/2022, Letnik: 220
    Journal Article

    •Chlorite oxidation by chlorine can be modelled in pure and synthetic waters.•Chlorate (60–70%) and ClO2 (30–40%) are formed from chlorite oxidation.•Predicting chlorite and chlorate can help to optimize ClO2 preoxidation.•Increasing ClO2 dose can improve disinfection byproduct mitigation.•A trade-off between inorganic and organic byproduct formation is needed. Chlorine dioxide (ClO2) applications to drinking water are limited by the formation of chlorite (ClO2–) which is regulated in many countries. However, when ClO2 is used as a pre-oxidant, ClO2– can be oxidized by chlorine during subsequent disinfection. In this study, a kinetic model for the reaction of chlorine with ClO2– was developed to predict the fate of ClO2– during chlorine disinfection. The reaction of ClO2– with chlorine was found to be highly pH-dependent with formation of ClO3– and ClO2 in ultrapure water. In presence of dissolved organic matter (DOM), 60-70% of the ClO2– was transformed to ClO3– during chlorination, while the in situ regenerated ClO2 was quickly consumed by reaction with DOM. The remaining 30-40% of the ClO2– first reacted to ClO2 which then formed chlorine from the DOM-ClO2 reaction. Since only part of the ClO2– was transformed to ClO3–, the sum of the molar concentrations of oxychlorine species (ClO2– + ClO3–) decreased during chlorination. By kinetic modelling, the ClO2– concentration after 24 h of chlorination was accurately predicted in synthetic waters but was largely overestimated in natural waters, possibly due to a ClO2– decay enhanced by high concentrations of chloride and in situ formed bromine from bromide. Understanding the chlorine-ClO2– reaction mechanism and the corresponding kinetics allows to potentially apply higher ClO2 doses during the pre-oxidation step, thus improving disinfection byproduct mitigation while keeping ClO2–, and if required, ClO3– below the regulatory limits. In addition, ClO2 was demonstrated to efficiently degrade haloacetonitrile precursors, either when used as pre-oxidant or when regenerated in situ during chlorination. Display omitted