E-viri
Recenzirano
Odprti dostop
-
Genuino, Homer C.; Pilar Ruiz, M.; Heeres, Hero J.; Kersten, Sascha R.A.
Waste management, 02/2023, Letnik: 156Journal Article
•Oil/wax yields from pyrolysis of mixed plastics can be predicted to a good extent.•The presence of PET in mixed plastic favors solid formation beyond predicted values.•The model can consistently predict the aliphatic carbon fraction in the oil/wax product. The predictability of pyrolysis yields and product composition of mixed plastics has been studied. To do so, pyrolysis of virgin polymers (HDPE, LDPE, PP, PS and PET) and eight individual sorting categories from a real waste DKR-350 stream (PE rigid/film, PP rigid/film, PET, PS, multilayer flexibles, and clogged materials) was performed in a batch reactor at 500 °C at laboratory scale. The obtained oil/wax, gas, and solid yields and the composition of oil/wax of those individual feedstocks were used as input of a superposition model to predict the corresponding pyrolysis yields and oil/wax composition of mixed feeds, which were later compared with the experimentally measured product yields from the pyrolysis of those mixed streams. This linear model predicts the oil/wax yield of the mixed streams to a reasonable extent, with a maximum yield deviation (overestimation) of 8 percentage points. However, the presence of significant amounts of PET (above 33 wt%) in the mixed plastic streams negatively impacts the production of the condensable product and promotes the formation of solid products beyond the expected predicted values. Quantification of the type of carbon (aliphatic, aromatic and carbonyl) present in all the oil/wax products was done using 13C NMR spectroscopy. A linear model could also predict the aliphatic carbon yield in the condensable product from plastic waste streams with high accuracy (maximum yield difference of 6 percentage points). However, the aromatic carbon yield could not be predicted, probably due to the observed behavior of PET, which interacts with other polymers to promote solid product formation.
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.