•The PEF/TiO2 NWs composites were successfully prepared via in-situ polymerization.•The introduction of TiO2 nanowires improved the impact strength of PEF obviously.•The UV and blue light shielding of PEF increase with the addition of TiO2 nanowires.•The nanocomposite could kill 98 % of E.coli mostly by exposing to UV light for 30 min.•Furthermore, the elongation at break of nanocomposite reaches 47.69 % at PSR of 2. As a candidate of fossil-based poly(ethylene terephthalate) (PET), bio-based poly(ethylene 2,5-furandicarboxylate) (PEF) that could be converted from renewable resources has attracted attention from academia and industry. Here, we prepare a series of new type of PEF/TiO2 NWs composites from 2,5-furandicarboxylic acid (FDCA), ethylene glycol (EG), titanium dioxide nanowire (TiO2 NWs, diameter∼100 nm, length∼20 µm) and dipentaerythritol (Di-PE) via in-situ polymerization. The TiO2 nanowires (0.5∼10 wt‰ based on PEF) and Di-PE (3 mol‰ based on FDCA) were added as fillers and extenders. TiO2 nanowires were distributed in the PEF uniformly, shown by SEM. Compared with pure PEF, the Tg and thermal stability of all nanocomposites got improved. And the impact strength of nanocomposites could reach 60 kJ/m2 in contrast to brittle pure PEF. The UV-A and blue-light shielding of nanocomposites increased from 53 % to 98 % and 28 % to 86 %, respectively, and the nanocomposites still maintained good gas barrier properties. Moreover, the antibacterial activity of nanocomposites against E. coli had increased to 98 %, better than that of the PEF/Ag NWs composites. By uniaxial pre-stretching, the tensile modulus and the elongation at break were improved obviously, from 1840 MPa to 5466 MPa and 4 % to 54 % respectively with pre-stretching ratio increasing. Compared to the PET/TiO2 NWs composites, the PEF/TiO2 NWs composites shows batter thermal property and mechanical property. The PEF/TiO2 NWs composites exhibit potential foreground in the packaging application.