In this study, a hydrocarbon-contaminated marine sediment was treated applying ex-situ thermal desorption (ESTD) at bench-scale. Temperatures up to 280 °C and heating times (t) in the 5–30 min range were investigated. Results revealed that temperatures in the range 200–280 °C led to Total Petrol Hydrocarbon (TPH)-removal efficiency (RE) from 75 to 85% (t = 10 min). The maximum RE of 89% was obtained at 200 °C for 30 min. However, a shorter remediation time of 5 min (or lower temperatures of 160 and 180 °C with longer times) is needed to reach the TPH standard limit. Data also demonstrated the selectivity of the treatment in TPH fraction removal. The modelling of the TPH removal kinetics and desorption isotherm jointly with activation energy calculation (>30 kJ mol−1) indicated that ESTD process is quite unfavorable for marine sediments. This is due to the fact that ESTD is regulated by chemisorption processes and occurred in two distinct TPH removal phases: evaporation and boiling vaporization. This depends on the strong affinity of the TPH with the fine sediment particles, as well as on the high initial water, salinity, organic matter and sulfides content. However, the comparison between alternative processes has shown that ESTD is the most feasible treatment process for TPH-contaminated marine sediment remediation. Obtained results also add relevant information that can be used as a basis for future scaling-up investigations of ESTD for hydrocarbon-contaminated marine sediments. Display omitted •Thermal desorption was carried out on contaminated marine sediment for TPH removal.•Temperatures in the range of 160–280 °C were investigated at the bench-scale.•The maximum TPH-removal of 89% was obtained at 200 °C for 30 min.•TD allows the rapid achievement of the TPH regulatory limits.•The comparison with other processes revealed ESTD as the most feasible treatment.