E-viri
Recenzirano
Odprti dostop
-
Bakshi, A.; Altantzis, C.; Bates, R.B.; Ghoniem, A.F.
Powder technology, October 2016, 2016-10-00, 2016-10-01, Letnik: 299, Številka: CJournal Article
Reliable scale-up of fluidized beds is essential to ensure that analysis and performance optimization at lab-scale can be applied to commercial scales. However, scaling fluidized beds for dynamic similarity continues to be challenging because flow hydrodynamics at lab-scale are largely influenced by bed geometry making extrapolation of conclusions to large-scales infeasible. Therefore, this study is focused on analyzing the effect of bed geometry on the fluidization hydrodynamics using large-scale CFD simulations. The two fluid model (TFM) is employed to describe the solids motion efficiently and simulations are conducted for fluidization of 1150μm LLDPE and 500μm glass beads in beds of different sizes (diameter D=15–70cm and initial bed height H0=10–75cm). The hydrodynamics are subsequently investigated qualitatively using time-resolved visualizations, bubble centroid and solids velocity maps as well as quantitatively using detailed bubble statistics and solids circulation metrics. It is shown that as the bed diameter is increased, average bubble sizes decrease although similar-sized bubbles rise faster because of lower wall resistance, both factors contributing to faster solids circulation. On the other hand, fluidization hydrodynamics in 50cm diameter bed are relatively insensitive to the choice of H0 and similarities in solids circulation patterns are observed in shallow beds as well as in the lower regions of deep beds. Finally, it is shown that the size and spatial-distribution of bubbles is crucial for maintaining dynamic similarity of bubbling beds. Specifically, the bed dimensions (D, H0) must ensure that (a) bubbles are typically much smaller than the bed diameter and (b) solids circulation patterns are similar across scales of interest. Overall, insights from this study can be used for describing the gas distribution and solids motion more accurately for better design of commercial beds. Display omitted •Effect of bed diameter and initial height investigated through fine-grid simulations•Smaller bubbles with higher velocities, faster solids circulations as D increased•Hydrodynamics unaffected by H0; dynamics in shallow and deep beds similar•Scaling must ensure bubbles smaller than 0.2D, similar bulk solids circulation•D=50cm and H0/D=0.5 suitable for scaling up fluidization hydrodynamics
Vnos na polico
Trajna povezava
- URL:
Faktor vpliva
Dostop do baze podatkov JCR je dovoljen samo uporabnikom iz Slovenije. Vaš trenutni IP-naslov ni na seznamu dovoljenih za dostop, zato je potrebna avtentikacija z ustreznim računom AAI.
Leto | Faktor vpliva | Izdaja | Kategorija | Razvrstitev | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Baze podatkov, v katerih je revija indeksirana
Ime baze podatkov | Področje | Leto |
---|
Povezave do osebnih bibliografij avtorjev | Povezave do podatkov o raziskovalcih v sistemu SICRIS |
---|
Vir: Osebne bibliografije
in: SICRIS
To gradivo vam je dostopno v celotnem besedilu. Če kljub temu želite naročiti gradivo, kliknite gumb Nadaljuj.