ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
The effect of the cutting speed on the cutting forces and surface finish when milling chromium 210 Cr12 steel hardfacings with uncoated cutting tools = Vpliv hitrosti rezanja na sile rezanja in kvaliteto površine pri rezkanju kromovih navarov 210 Cr12 z rezilnim orodjem brez prevlekeAltin, AbdullahThe experimental study presented in this paper aims to select the most suitable cutting and offset parameter combination for a milling process in order to obtain the desired surface roughness value ... for a machined workpiece of chromium 210 Cr12 steel, in terms of cutting speed, feed rate and depth of cut for the milling process. A series of experiments was performed on chromium material with a cutting width of 50 mm using a round, uncoated, cemented-carbide insert on a engine power 5.5 kW Jhonford VMC550 CNC vertical machining center without any cutting fluid. The experiments were carried out using four different cutting speeds ((70, 90, 110, 130) m/min) at a constant depth of cut (1 mm) and feed rate (0.3 mm/r) and the effects of the cutting speeds on the primary cutting force and the surface roughness were investigated. The cutting force (Fc) and the surface roughness (Ra) decreased with the workpiece material%s easy machinability. From the experiments, the highest average primary cutting force was obtained as 658.17 N at a cutting speed of 70 m/min. The lowest average surface roughness was 0.36 %m, which was obtained at a cutting speed of 70 m/min. The experimental results indicated that the obtained chip form is narrow and short stepped.Source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 3, maj-jun. 2014, str. 373-378)Type of material - article, component part ; adult, seriousPublish date - 2014Language - englishCOBISS.SI-ID - 1056682
source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 48, št. 3, maj-jun. 2014, str. 373-378)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Altin, Abdullah |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: