ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Real contact temperatures as the criteria for the reactivity of diamond-like carbon coatings with oil additivesKalin, Mitjan ; Vižintin, JožeThe operating conditions under which chemical reactions between diamond-like-carbon (DLC) coatings and oil additives occur and the main driving forces, i.e., the activation criteria for these ... chemical reactions, have not yet been defined. In order to clarify the difference between the test temperature and real contact temperature, and to determine the effect of the real contact temperature for these reactions, we have calculated the contact temperatures using two well-known models and compare them with results of tribological experiments and some state-of-the-art analyses of wornsurfaces. The results suggest that the actual surface temperatures are 100-130 °C higher than the test temperatures. A contact temperature of about 250-260 °C was found to be the required key activation criterion for chemical reactions between the dialkyl dithiophosphate extreme-pressure (EP) additive and the DLC coating. Gradual formation of a tribochemical protective film from phosphates and organic sulphur/sulphates suggests a lower chemical reactivity and slower formation of the optimal tribochemical protective layer on DLC coatings than on steels. No tribological effect of anti-wear (AW)or EP additives could be found on the DLC coatings when the surface temperatures were below 120-140 °C. The temperature-induced graphitisation of the DLC that occurred in the contacts with the base oils, however, require about 250 °C of contact temperature. Lower surface temperatures or the use of additives suppressed this graphitisation.Source: Thin solid films. - ISSN 0040-6090 (Letn. 518, št. 8, Feb. 2010, str. 2029-2036)Type of material - article, component partPublish date - 2010Language - englishCOBISS.SI-ID - 11274267
Author
Kalin, Mitjan |
Vižintin, Jože
Topics
tribologija |
DLC |
pogoji mazanja |
olja |
aditivi |
temperature |
trenje |
obraba |
DLC |
oils |
additives |
contact temperature |
lubrication |
wear |
diamond like carbon
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kalin, Mitjan | 14556 |
Vižintin, Jože | 00812 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: