ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
The effect of surface roughness of end-mills on optimal cutting performance for high-speed machiningChi-Hsiang, Chen ; Yung-Cheng, Wang ; Bean-Yin, LeeIn this study, the effect of surface roughness of end-mills on the cutting performance of high-speed machining has been investigated. A novel optimization design approach of the processing parameters ... for the high-speed cutting of the DIN 1.2344 tool steel has been also proposed. The characteristics indices of cutting performance selected for this investigation are tool life and metal removal rate. The processing parameters include the surface roughness of the relief face of an end-mill, cutting speed, feed per tooth, axial cutting depth, and radial cutting depth. The process is integrated using multiple performance indices. Consequently, the optimal combination of processing parameters is determined by performing grey relational analysis. The analysis results indicate that the effect of cutting speed and feed per tooth are significant for multiple performance characteristics. Additionally, the surface roughness of the relief face of an end-mill essentially affects the surface roughness of the processed workpiece. Due to a slight effect on the cutting performance characteristics of rough machining, a surface roughness of the relief face of 0.430.02 m for grinding conditions can be used to improve tool grinding efficiency. Verification experiments revealed that the proposed optimization design approach to the processing parameters brings about improvements of 9.1 min in tool life, 1200 mm3/min in metal removal rate, 230616 mm3 in total metal removal volumes, and 0.044 m in average surface roughness of the workpiece with highspeed cutting.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 2, Feb. 2013, str. 124-134, SI 21)Type of material - article, component partPublish date - 2013Language - englishCOBISS.SI-ID - 13070619
source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 59, no. 2, Feb. 2013, str. 124-134, SI 21)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Chi-Hsiang, Chen | |
Yung-Cheng, Wang | |
Bean-Yin, Lee |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: