ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Criteria and properties of the asperity peaks on 3D engineering surfaces
Kalin, Mitjan ; Pogačnik, Aljaž, 1985-
In any attempt to theoretically calculate the real contact area for 3D engineering surfaces, a criterion is needed to identify the relevant asperity-peaks that carry the load in tribological ...contacts. In our recent work, we investigated how different, available 2D criteria affect the properties of the theoretically determined asperity-peaks in 2D surfaces. In this work, however, we focused on a 3D surface characterisation. The effect of different asperity-peak identification criteria on the properties of the asperity-peaks (numbers, radii and heights) is studied in the 3D domain. Several different criteria that take into account the number of neighbouring points, the distances between them (lateral resolution) and their heights were evaluated for real measured surfaces with five different surface roughnesses in the broad engineering range of arithmetic surface roughness from Sa=0.005um to Sa=0.529um. From the results it follows that all three chosen asperity-peak identification criteria (5PP-3D, 9PP-3D and 9PP-R-3D) result in reliable asperity-peak properties, and none of them can be favoured based on a theoretical evaluation only. There are, however, important differences between them. The data resolution in the x and y directions has a very important influence on the numbers, radii and heights of the asperity-peaks, and the results suggest that the data's lateral resolution, below 1um, should be used for the relevant asperity-peak identification.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
