ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Numerical analysis of operational performance of POM/PA6 polymer S-type spur gears and analysis of influence of the production processČerne, Borut, 1989- ; Duhovnik, Jože, 1948-A comparative numerical analysis approach is used in the presented paper, aimed at the investigation of the operational performance of polymer S-gears as compared to more typical involute spur gears. ... The analyses are performed using the FEM (finite element method), which is implemented through ANSYS commercial software, where a full gear meshing cycle for four different spur gear geometries is examined. A POM/PA6 combination of materials is considered for the gear pair, where the driver gear is made from POM (Polyoximethylene or acetal) and the follower gear from PA6 (Nylon). Furthermore the influence of the production process of polymer gears is taken into consideration by applying an injection molding simulation for both materials and all four gear geometries. The aim of the simulation is analyzing how the gear geometry deforms (shrinks) during the cooling of the molded gear, if no measures are taken in advance to reduce the shrinkage effects. Commercial software Autodesk Moldflow was used to perform the task. By implementing the deformed gear geometries in a repeated FEM analysis of the gear meshing cycle it is then possible to observe how the different gear types perform if the center distance is not recalibrated relatively to the molding shrinkage and initial settings are kept.Source: International journal of mechanical engineering and automation. - ISSN 2333-9179 (Vol. 2, nr. 12, Dec. 2015, str. 525-533)Type of material - article, component partPublish date - 2015Language - englishCOBISS.SI-ID - 14407963
source: International journal of mechanical engineering and automation. - ISSN 2333-9179 (Vol. 2, nr. 12, Dec. 2015, str. 525-533)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Černe, Borut, 1989- | 37664 |
Duhovnik, Jože, 1948- | 02859 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: