ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Machining of hard-to-cut AISI 4462 duplex stainless steel with an environmentally friendly approach with vortex tubeSönmez, FikretMachining is a manufacturing process that can be used to produce precision machine parts and has many advantages. The first is the ability to achieve superior surface quality. Tool wear is an ... inevitable phenomenon that occurs during machining. It is affected by many machining conditions; therefore, this process needs to be monitored and controlled. In this study, tool wear and surface roughness tests were carried out on AISI 4462 duplex stainless-steel materials, known to be a hard-to-cut material. For this purpose, tool wear and surface roughness analyses were implemented by using the environmentally friendly vortex tube cooling system in addition to wet turning conditions for the first time. For both methods, experiments were conducted at a 1 mm depth of cut, 120 m/min cutting speed, and 0.1 mm/rev feed with a 90 mm cutting length for each pass. Both tool wear and surface roughness were examined at the end of each pass. The analysis showed that wet turning gave better results in terms of tool life (19.8 minutes of tool life) compared to 11.1 minutes of tool life in vortex turning. In contrast, the surface roughness values differed up to two times in some experiments, and the vortex tube experiments gave better surface roughness values in all passes. In addition, the vortex tube experiments showed less built-up-edge (BUE) formation than the wet-turning experiments.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 7/8, Jul./Aug. 2023, str. 308-316)Type of material - article, component part ; adult, seriousPublish date - 2023Language - englishCOBISS.SI-ID - 159320835
source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 7/8, Jul./Aug. 2023, str. 308-316)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Sönmez, Fikret |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: