ALL libraries (COBIB.SI union bibliographic/catalogue database)
  • Density profile and morphology of viscoelastic thermal compressed wood
    Kutnar, Andreja ; Kamke, Frederick A. ; Šernek, Milan
    The viscoelastic thermal compression (VTC) of low-density hybrid poplar (Populus deltoides, Populus trichocarpa) from fast growing trees was performed in order to produce specimens with three ... different degrees of densification (63, 98, and 132%). The morphology and density profile of the VTC specimens were studied. Three different methods for the preparation of specimens for microscopy were used in order to find a technique that makes it possible to examine the VTC wood microscopically in the completely deformed state. It was found that the abrasive surface preparation of oil-embedded blocks was the most promising technique. Microscopic observation revealed that the deformations in the VTC wood were mostly the result of the viscous buckling of cell walls without fracture. The volume of the void areas in the specimens decreased with the degree of densification. The results showed that the density profile of the VTC wood varied with the degree of densification as a consequence of different temperature and moisture gradients formed before and during wood compression. The density profile is also visible on the cross-section of the VTC specimens.
    Source: Wood Science and Technology. - ISSN 0043-7719 (Vol. 43, no. 1/2, 2009, str. 57-68)
    Type of material - article, component part ; adult, serious
    Publish date - 2009
    Language - english
    COBISS.SI-ID - 1655177

source: Wood Science and Technology. - ISSN 0043-7719 (Vol. 43, no. 1/2, 2009, str. 57-68)
loading ...
loading ...
loading ...