ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
On the fatigue properties of material extrusion 3D-printed biodegradable composites reinforced with continuous flax fibers
Kajbič, Jure ; Klemenc, Jernej ; Fajdiga, Gorazd
Nowadays, additive manufacturing is increasingly used for prototypes and low-volume products. Firstly, it offers great design freedom; however, the components must inevitably have certain design ...artifacts that cause stress concentrations. To this end, composites of biodegradable PLA (polylactic acid) matrix and continuous flax fibers were fabricated in this study using material extrusion 3D printing. Static characterization and mechanical fatigue tests between 103 and 2·106 load cycles were performed for plain specimens, three types of notches for the matrix, and two composite configurations. The notches only slightly affected the static performance of the tested materials. Accordingly, compared to the unnotched versions, the PLA matrix and composites exhibited a reduction in tensile strength of up to 8% and 19%, respectively. It was found that compared to the PLA matrix, the fatigue strength at high cycles increased by 1.8 and 2.3 times for the plain composite with a fiber volume fraction of 7.8% and 14% fibers, respectively. In the fatigue of notched composites, the notch effect is reduced by fibers in the tip. The fatigue strength is up to 1.9 and 2.9 times higher compared to the notched matrix for the composite with a smaller and larger volume fraction, respectively.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
