-
Effects of the opening speed of the valve in a diaphragmless shock tube for metrological purposesHernández Castro, Francisco Javier ; Kutin, Jože ; Svete, Andrej, 1983-To develop a measurement system for calibrating high-frequency dynamic pressure that is capable of acting as a primary dynamic pressure calibration standard, a new concept of the shock tube, called ... the diaphragmless shock tube, has recently been developed. In most such shock tubes, the diaphragm is replaced with a commercially available, ISTA KB fast-opening valve (FOV). In this article, a numerical model was built in OpenFOAM to investigate the effects of the opening mechanism of ISTA KB-40-100 FOV on the formation of the shock wave in a shock tube with an internal radius of 20 mm. Numerical simulations were performed for the driver-driven pressure ratio of 40 and the valve-opening speeds of 5, 10, and 20 m/s, which were compared with the case of instantaneous valve opening, and the results predicted by the ideal shock tube theory. The observed variables were the mass flow through the valve, as well as the pressure, the temperature, and the shock wave velocity in the formation region behind the valve. The results show that when the shock wave undergoes an initial acceleration, the shock front accelerates more at higher opening speeds of the valve. The results also show that the valve-opening mechanism generates a series of reflection waves that propagate into the driven section, giving the shock wave velocity an oscillatory character, which can affect the calibration and measurement capability of the shock tube as a primary high-frequency, time-varying, pressure calibration standard.Source: IEEE sensors journal. - ISSN 1530-437X (Vol. 24, no. 1, Jan. 2024, str. 158-168)Type of material - article, component part ; adult, seriousPublish date - 2024Language - englishCOBISS.SI-ID - 179395587
Author
Hernández Castro, Francisco Javier |
Kutin, Jože |
Svete, Andrej, 1983-
Topics
diaphragmless shock tubes |
numerical simulations |
OpenFOAM |
primary calibration method |
shock wave formation |
time-varying pressure |
brezmembranske udarne cevi |
numerične simulacije |
OpenFOAM |
primarna kalibracijska metoda |
formiranje udarnega vala |
časovno spreminjajoči tlak
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Hernández Castro, Francisco Javier | 55552 |
Kutin, Jože | 20047 |
Svete, Andrej, 1983- | 29619 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.