ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Nanoarchitectonics with electrochemical additive manufacturing process for printing the reduced graphene oxideChauhan, Viplov ...The synthesis process of reduced graphene oxide (rGO) sheets generally requires the printing of graphene oxide (GO) as a first step and later its reduction through a chemical or thermal route to get ... the required rGO in the second step. The present work demonstrates the printing of rGO using 0.1% w/v dispersion of GO in water in a single-step process. The method uses the nascent electrochemical additive manufacturing, which allows for non-template-based deposition of microscopically patterned systems. The samples are deposited at 1, 3, and 5 V at 0.1 mm s−1 printing speed. Deposited rGO is characterized using XRD, Raman, and FTIR for various qualitative and quantitative aspects. The surface morphology and topographical studies are performed using SEM and AFM techniques. The RMS roughness calculated using the AFM results, ranging from 5.7 nm to 15.3 nm for 1 to 5 V, indicates the trend of increasing roughness with the deposition potential. The XAS spectroscopy data show that the sample printed at 5 V has the highest purity rGO. The capacitive behaviour of the as-deposited rGO has also been discussed and contrasted with the rGO deposited using other prevalent methods. The specific capacitance of the micro capacitor was found up to 10.84 F g−1 with coulombic efficiencies for 500 cycles at 0.2 A g−1.Source: Applied physics. A, Materials science & processing. - ISSN 0947-8396 (Vol. 128, 2022, article number 458, str. 1-9)Type of material - article, component part ; adult, seriousPublish date - 2022Language - englishCOBISS.SI-ID - 180041987
Author
Chauhan, Viplov |
Kumar, Satendra |
Kumar, Surender
Topics
reduced graphene oxide |
electrochemical additive manufacturing |
micro-capacitor |
3D printing |
reduciranje |
oksid |
grafen |
3D tiskanje
source: Applied physics. A, Materials science & processing. - ISSN 0947-8396 (Vol. 128, 2022, article number 458, str. 1-9)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Chauhan, Viplov | |
Kumar, Satendra | 58554 |
Kumar, Surender |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: