-
Grinding of cemented carbide using a vitrified diamond pin and lubricated liquid carbon dioxideKareepadath Santhos, Deepa ; Pušavec, Franci ; Krajnik, Peter, strojnikDespite extensive research on grinding of cemented carbide, few studies have examined abrasive machining of this material using small-diameter super abrasive tools (also known as grinding ... pins/points), especially with respect to varying cooling-lubrication methods. This study therefore focuses on a comparative experimental investigation of three such methods - dry, emulsion, and lubricated liquid carbon dioxide (LCO2-MQL). The performance of these methods and the resulting grindability are examined in terms of grinding forces, force ratios, specific energy, and through the analysis of wheel loading. The results show that LCO2-MQL grinding has lower grinding forces (normal forces – 8 % to 145 % lower than dry grinding, and 18 % to 33 % lower than emulsion grinding and tangential forces – 4 % to 66 % lower than dry grinding and 28 % to 78 % lower than emulsion grinding) and specific energy 24 % to 51 % lower compared to dry grinding and 64 % to 69 % lower than emulsion grinding, indicating its potential for efficient material removal. However, a challenge with high wheel loading was observed with LCO2-MQL, likely due to the lack of oxygen in the CO2 grinding atmosphere. Despite this issue, the LCO2-MQL method shows potential for efficient operations, especially at higher aggressiveness values where the lowest specific energies were achieved. These results provide new insights into various aspects of cooling-lubrication methods in the pin grinding of cemented carbides.Source: Strojniški vestnik = Journal of mechanical engineering. - ISSN 0039-2480 (Vol. 69, no. 11/12, Nov./Dec. 2023, str. 435-443)Type of material - article, component part ; adult, seriousPublish date - 2023Language - englishCOBISS.SI-ID - 182570243
Author
Kareepadath Santhos, Deepa |
Pušavec, Franci |
Krajnik, Peter, strojnik
Topics
diamond |
grinding |
cemented carbides |
cooling-lubrication |
carbon dioxide |
brušenje |
karbidne trdine |
hlajenje |
mazanje |
diamantni brus |
kapljeviti ogljikov dioksid (LCO2) |
enokanalni dovod |
minimalna količina mazanja (MQL)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kareepadath Santhos, Deepa | 54942 |
Pušavec, Franci | 26559 |
Krajnik, Peter, strojnik | 23470 |
Select pickup location:
Material pickup by post
Notification
Subject headings in COBISS General List of Subject Headings
Select pickup location
Pickup location | Material status | Reservation |
---|
Please wait a moment.