ALL libraries (COBIB.SI union bibliographic/catalogue database)
PDF
  • Mechanical properties and leak-tightness of polymeric pipe adhesive joints [Elektronski vir]
    Rudawska, Anna ...
    This paper presents issues related to the determination of the selected mechanical properties of adhesive joints made of polymeric pipes and the evaluation of the leak-tightness of the adhesive ... joints. The article attempts to demonstrate that the type of adhesive may affect the quality of adhesive joints in terms of both tightness and strength of joints. Five types of the polymer pipes differing in a polypropylene and a polyvinyl chloride, diameter and a wall thickness were used in the experiments. Two types of the adhesives were used to make the adhesive joints: Loctite 3430 A&B Hysol, a two-component epoxy adhesive, and Loctite 406, a one-component cyanoacrylate adhesive. Based on the leak-tightness tests results, it was possible to determine the quality of their adhesive joints without damaging the samples, while their tensile strength was determined through the strength tests. The tests performed allowed for the conclusion that the use of the polyvinyl chloride pipes and Loctite 406 one-component adhesive is recommended for this type of adhesive joints.
    Source: Applied mechanics [Elektronski vir]. - ISSN 2673-3161 (Vol. 3, iss. 3, 2022, str. 64-77)
    Type of material - e-article ; adult, serious
    Publish date - 2022
    Language - english
    COBISS.SI-ID - 202628099