ALL libraries (COBIB.SI union bibliographic/catalogue database)
13.
Algorithm for calculation of cutting conditions during turning based on permissible deflection of workpiece
Čuš, Franc, 1953- ; Muršec, Bogomir
In the paper the formulas are developed for the depth of cutting and feeding during turning, based on the permissible deflection of the workpiece, for three basic methods of workpiece clamping. By ...means of the formulas it is possible to calculate the feeding and the cutting depth before the begining of the turning process. The derivation is based on the permissible deflection of the workpiece for three different clamping methods. The terms for the main force during turning are entered into the deflection values. From the obtained equations the feeding force and the ctting depth are derived. Thus the formulas for calculating the feeding force and the cutting depth are obtained on he basis of the permissible deflection of the workpiece for individual ways of clamping. If the deflection was greater than permitted, the precision of the woprkpiece would be affected. The presented algorithm enables the programmer to calculate simply the feeding and the cutting depth so that the machined surface is in accordance with TMQ criteria (Total Quality Management).
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
