Metal injection moulding (MIM) is already a well establiched and promising technology for the mass production of small, complex, near net shape products. The dimensions and mechanical properties of ...MIM products are influenced by the feedstock characteristics, the process parameters of injection moulding, as well as the debinding and the sintering. The mechanical properties primarily depend on the sintering density and the microstructure. However, the process parameters of the injection moulding must not be neglected. The present investigations were focused on the influence of the main injection moulding parameters and the sintering conditions. The investigations showed that appropriate mechanical properties can be obtained for MIM products. However, they are drastically deteriorated if inappropriate injection moulding and sintering conditions are selected. In this contribution the influence of the injection moulding and sintering parameters on the mechanical properties of sintered material is presented and discussed. For the optimisation of the whole process a feedstock characterisation was also made.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
