Influence of fading and stirring on the performance of the AlTi5B1 and AlTi3C0.15 grain refiners in an Al-Fe alloy
Naglič, Iztok
An Al-Fe alloy was in one case grain refined with the AlTi5B1 grain refiner and in the other AlTi5B1 and AlTi3C0.15 grain refiners. Both melts were stirred and the samples were cast two and ...twenty-five minutes after the addition of the grain refiners. The grain size increase with increasing holding time was almost negligible in the case of the addition of both grain refiners. A much larger increase was found in the case of the addition of just the AlTi5B1 grain refiner, indicating the fading of the effectiveness the AlTi5B1 grain refiner and the effectiveness of the AlTi3C0.15 grain refiner in the case when the melt was grain refined with both grain refiners. The result suggests that the use of both grain refiners allows the possibility to control the fading performance of a grain-refined melt.
It was not necessary to add the material to the shelf.
Bibliographic material was successfully added on shelf.
Adding bibliographical material on shelf was not successful.
Material is already on the shelf.
Permalink
URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year
Impact factor
Edition
Category
Classification
JCR
SNIP
JCR
SNIP
JCR
SNIP
JCR
SNIP
Select the library membership card:
DRS,
in which the journal is indexed
Database name
Field
Year
Links to authors' personal bibliographies
Links to information on researchers in the SICRIS system
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
PDF
