ALL libraries (COBIB.SI union bibliographic/catalogue database)
-
Influence of the foaming precursor's composition and density on the foaming efficiency, microstructure development and mechanical properties of aluminium foams = Vpliv sestave in gostote prekurzorjev za penjenje na učinkovitost penjenja ter razvoj mikrostrukture in mehanskih lastnosti aluminijskih penKevorkijan, Varužan ...In this work, the influence of the composition, density and porosity of foaming precursors on the foaming efficiency, microstructure development and mechanical properties of aluminium foams are ... presented and discussed. The foams were prepared, starting from precursors made either by powder metallurgy (PM) or by the melt route. Following the PM route, precursors were made by mixing Al powder and 3-10 % of volume fractions of dolomite or calcium carbonate particles of particle size from 20 [mu]m to 120 [mu]m and cold isostatically pressing the mixture at 700 MPa. In the case of the melting route, precursors were made by introducing dolomite or calcium carbonate particles directly into the molten aluminium at 700 [compositum]C. After melt stirring, the precursors were prepared by casting the semi-solid slurry into a cylindrical, water-cooled mould. Finally, aluminium foams were made in all cases by inserting precursors into a cylindrical stainless-steel mould and heating the arrangement at 750 [compositum]C for 10 min. After that, the mould was removed from the furnace and the foaming process was stopped by cooling in air to room temperature. The microstructure of the obtained foams was investigated by optical and scanning electron microscopy (SEM-EDS), while XRD was applied for a detailed identification of phases. The quality of the precursors was evaluated by determining their mechanical properties (uniaxial room-temperature compression stress-strain curve, compressive strength and energy absorption after a 30 % strain) and the foaming efficiency (the relative density of the foam obtained). The concentration of the foaming agent and the density of precursors were found to have a detrimental influence on the foaming efficiency as well as on the foam's microstructure and mechanical properties. The foaming of precursors with open porosity were inefficient.Source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 2, 2011, str. 95-103)Type of material - article, component partPublish date - 2011Language - englishCOBISS.SI-ID - 856490
Author
Kevorkijan, Varužan |
Škapin, Srečo D. |
Paulin, Irena |
Šuštaršič, Borivoj |
Jenko, Monika, metalurginja |
Lažeta, Marjana
Topics
aluminium foams |
foaming agents |
calcium carbonate |
dolomite |
characterization |
aluminijske pene |
sredstvo za penjenje |
kalcijev karbonat |
dolomit |
karakterizacija
![loading ... loading ...](themes/default/img/ajax-loading.gif)
source: Materiali in tehnologije = Materials and technology. - ISSN 1580-2949 (Letn. 45, št. 2, 2011, str. 95-103)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
![loading ... loading ...](themes/default/img/ajax-loading.gif)
Shelf entry
Permalink
- URL:
Impact factor
Access to the JCR database is permitted only to users from Slovenia. Your current IP address is not on the list of IP addresses with access permission, and authentication with the relevant AAI accout is required.
Year | Impact factor | Edition | Category | Classification | ||||
---|---|---|---|---|---|---|---|---|
JCR | SNIP | JCR | SNIP | JCR | SNIP | JCR | SNIP |
Select the library membership card:
If the library membership card is not in the list,
add a new one.
DRS, in which the journal is indexed
Database name | Field | Year |
---|
Links to authors' personal bibliographies | Links to information on researchers in the SICRIS system |
---|---|
Kevorkijan, Varužan | 04968 |
Škapin, Srečo D. | 11093 |
Paulin, Irena | 28660 |
Šuštaršič, Borivoj | 08195 |
Jenko, Monika, metalurginja | 05675 |
Lažeta, Marjana | 15911 |
Source: Personal bibliographies
and: SICRIS
Select pickup location:
Material pickup by post
Delivery address:
Address is missing from the member's data.
The address retrieval service is currently unavailable, please try again.
By clicking the "OK" button, you will confirm the pickup location selected above and complete the reservation process.
By clicking the "OK" button, you will confirm the above pickup location and delivery address, and complete the reservation process.
By clicking the "OK" button, you will confirm the address selected above and complete the reservation process.
Notification
Automatic login and reservation service currently not available. You can reserve the material on the Biblos portal or try again here later.
Subject headings in COBISS General List of Subject Headings
Select pickup location
The material from the parent unit is free. If the material is delivered to the pickup location from another unit, the library may charge you for this service.
Pickup location | Material status | Reservation |
---|
Reservation in progress
Please wait a moment.
Reservation was successful.
Reservation failed.
Reservation...
Membership card:
Pickup location: